VooPoo PnP X Replacement Coils | Pack Of 5

Five coils per pack. Four resistance options at Pirate Vapes. The VooPoo PnP X coils are the current generation of VooPoo's push-fit coil platform, built with thermo-stable cotton, mesh-distributed heating, and a 4-layer leak-proof structure that the older PnP coils did not have. VooPoo rates each coil for up to 100ml Of E-Liquid before flavour drops off, which is roughly two to three weeks of daily use for most vapers.

They fit the Drag X2, Drag S2, Drag X3, Drag S3, Drag 6, Vinci S, Vinci Spark range, Argus series, and every UFORCE-X Tank running PnP X pods. Directional push-fit installation means no threading and no tools. Pull the old coil out, push the new one in. TPD compliant. Over 18s only.

Why vapers choose the VooPoo PnP X Replacement Coils:

• Longer Coil Life: Each PnP X coil can handle up to 100ml of e-liquid, lasting around 2–3 weeks depending on usage and e-liquid type. Thermo-stable cotton helps prevent burning at higher temperatures.
• Leak-Resistant Design: The 4-layer leak-proof structure reduces condensation and leaks. The dual L-shaped seal keeps e-liquid inside the coil chamber for cleaner use.
• Consistent Flavour: PnP X mesh heating spreads heat evenly to prevent hot spots, keeping flavour smooth and consistent throughout the coil lifespan.
• Multiple Vaping Styles: Four resistance options support DTL, RDL, and MTL vaping. Use 0.15Ω/0.2Ω for DTL, 0.3Ω for RDL, and 0.6Ω for MTL.
• Easy Push-Fit Installation: Replace coils in seconds without tools. Simply remove the old coil, align the new one, and push it into place.

VooPoo PnP X Replacement Coils | Pack Of 5 Features

Thermo-Stable Cotton Wicking

Standard cotton starts breaking down around 150-180C. The thermo-stable cotton in PnP X coils handles higher temperatures without scorching, which is why these coils last through 100ml of e-liquid while cheaper coils give up around 30-50ml. If you chain vape or run higher wattages, this is the spec that keeps your flavour clean longer.

4-Layer Super Leak-Proof Structure

VooPoo redesigned the internal seal with a three-stage dual L-shape structure that keeps condensate locked inside the coil chamber. If you switched from the older PnP coils because of leaking, this is the specific engineering change that fixes it. The trade-off is that PnP X coils only fit PnP X platform devices.

Mesh-Distributed Heating Element

The mesh heating surface inside each PnP X coil covers a wider area than round-wire or basic mesh designs. Heat distributes evenly across the full surface, which eliminates the hot spots that burn cotton prematurely and cause dry hits. Even heating also means the flavour profile stays more accurate across the full lifespan of the coil.

Directional Push-Fit Installation

No threading. No tools. The base of each PnP X coil has a shaped profile that only fits in one orientation, so you cannot install it wrong. Push until it clicks and seats flush. Pull straight out to remove. Coil changes take five seconds, even on the go.

Full Resistance Coverage: 0.15 ohm to 0.6 ohm

Four resistance options at Pirate Vapes covering DTL, RDL, and MTL. Whether you run the 0.15-ohm at 80W for heavy clouds or the 0.6-ohm at 18W with nic salts, every coil uses the same push-fit connection and fits every PnP X device. One platform, every vaping style.

VooPoo PnP X Replacement Coils | Pack Of 5 Coil Types

Four coil options stocked at Pirate Vapes. Each one is designed for a specific wattage range and draw style. Pick the resistance that matches how you vape and the e-liquid you use. If you are not sure, the 0.3-ohm is the most versatile starting point for vapers who sit between MTL and DTL.

• 0.15 ohm DTL: The cloud coil. Runs hot, produces dense warm vapour, and drinks battery. Best with high VG freebase at 3-6mg. Ideal for Drag 6, Drag X3, and Vinci Spark 220 users who want maximum output

• 0.2 ohm DTL: Full DTL but slightly milder than the 0.15. Better battery life, still substantial clouds. Good middle ground for DTL vapers who find the 0.15 too warm

• 0.3 ohm RDL-MTL: The most versatile option. Sits right between RDL and light DTL. Works with 60-70% VG freebase or stronger nic salts at lower concentrations. Good flavour, moderate clouds, reasonable battery drain. Where most Drag S3 and Vinci Spark owners end up

• 0.6 ohm RDL-MTL: The MTL and restricted RDL option. Low power, tight draw, pairs with 50/50 nic salts up to 50mg. The right pick for anyone coming from pod kits or cigarettes

How to Set Up the VooPoo PnP X Replacement Coils | Pack Of 5

1. Remove the pod or tank. Pull the PnP X pod off your device, or unscrew the UFORCE-X Tank from the 510 base.

2. Pull the old coil out. Grip the base of the old coil and pull it straight down and out of the pod or tank. No twisting needed.

3. Open a new coil. Take a fresh PnP X coil from the pack. Check the resistance printed on the side matches what you want.

4. Prime the coil. Put a few drops of e-liquid directly onto the cotton visible through the ports on the side of the coil. This pre-saturates the cotton and prevents a dry hit on your first draw.

5. Push the new coil in. Align the coil with the base of the pod or tank (the directional shape guides the orientation). Push firmly until it clicks and sits flush with no gap at the base.

6. Fill the pod or tank. Top up your e-liquid to the line. Close the fill port.

7. Wait. Let the filled pod sit for five to ten minutes so the thermo-stable cotton fully absorbs the liquid. This step matters, especially on the lower-resistance coils that have more cotton to soak.

8. Reattach and vape. Push the pod back onto the device, or screw the tank back on. Your device should auto-detect the new coil resistance and adjust the wattage accordingly.

What's in the VooPoo PnP X Replacement Coils | Pack Of 5 Box

Five VooPoo PnP X coils of the same resistance (0.15 ohm, 0.2 ohm, 0.3 ohm, or 0.6 ohm depending on which pack you order). Each coil is individually sealed in its own foil wrapper inside the box. No pods, no devices, no e-liquid included. These are Replacement Coils only. You need a PnP X compatible device and pod or tank to use them.

Made for Every VooPoo PnP X Device and Tank

The PnP X coil platform is VooPoo's current-generation coil system. It fits a wide range of their devices, but it does not fit older PnP devices. Check this list before ordering.

Compatible Devices and Tanks:

• Drag Series: Drag 6 (paired with the UFORCE-X Tank), Drag X3, Drag S3, Drag X2, Drag S2, and the Drag 4 if it shipped with PnP X pods rather than the older PnP version

• Vinci Series: Vinci S when fitted with a PnP X cartridge (the standard Vinci S pods have built-in coils and do not use these), Vinci Spark 100, Vinci Spark 220, and the Vinci E80 with its PnP X pod

• Argus Series: Argus Pro 2, Argus MT, and Argus E40

• Other: Doric 60 Pro, UFORCE-X Tank (PnP X version), UFORCE-X Tank II, and PnP X Pod Tanks in both DTL and MTL configurations 

Not Compatible:

• Original PnP coils do NOT fit PnP X devices (and vice versa)

• VooPoo Argus Multi-Ohm pods (different coil system)

• VooPoo Vinci Q pods (different platform)

• VooPoo Drag Nano 2 pods (different platform)

• VooPoo iCOSM CODE 2.0 pods (different system)

About VooPoo

VooPoo launched in 2014 and the PnP Coil Platform is what ties most of their product range together. The PnP X is the fourth generation, replacing the original PnP coils with thermo-stable cotton, mesh-distributed heating, and a 4-layer leak-proof seal.

The PnP X platform now runs across the Drag series, Vinci series, Argus series, and UFORCE-X tanks, which means one coil family covers most of what VooPoo sells. If you own any VooPoo Device from the last two years, there is a strong chance these are the correct replacement coils. Browse the full VooPoo vapes collection at Pirate Vapes.

Stock Up and Save

Five coils per pack. At two to three weeks per coil, a single pack covers roughly two to three months of daily vaping. But if you run sweet dessert e-liquids or chain vape at high wattages, coils burn out faster and having a backup pack on hand means no emergency orders mid-week.

At Pirate Vapes, we keep all four resistance options in stock and pack each box padded to prevent damage in transit. Every product is TPD compliant and sold through age-verified checkout. Same-day dispatch before 4pm. Free Pirate Vapes over £25.

Conclusion

The VooPoo PnP X coils are the current standard for anyone running a PnP X compatible VooPoo device. The thermo-stable cotton and mesh-distributed heating give them longer life and more consistent flavour than the older PnP coils they replaced.

The 4-layer leak-proof structure solves the condensation leaking issue that frustrated a lot of PnP users. And the four resistance options stocked at Pirate Vapes cover DTL clouds, RDL balance, and MTL nic salt vaping in a single coil family. 

If your device takes PnP X coils, these are the ones to order. Grab a five-pack from Pirate Vapes and browse our VooPoo vapes collection and Replacement Coils range to keep your kit running.

FAQs

Do PnP X coils fit my older Drag S or Drag X? 

No. The original Drag S and Drag X use the older PnP coil platform. PnP X coils have a different internal structure and do not fit older PnP devices. Check the compatibility list above before ordering.

How long does each coil last? 

VooPoo rates them for up to 100ml of e-liquid per coil. In daily use, most vapers get two to three weeks. Sweet dessert e-liquids with heavy sweetener shorten that. Fruit and menthol flavours tend to last longer.

Which resistance should I buy? 

Depends on how you vape. 0.15 or 0.2-ohm for DTL clouds. 0.3-ohm for RDL or light DTL. 0.6-ohm for MTL or restricted draws with nic salts. If you are not sure, the 0.3-ohm is the safest middle ground.

How do I install them? 

Pull the old coil straight out. Push the new one in until it seats flush. The directional shape means you cannot install it the wrong way around. No threading and no tools needed.

Do I need to prime them before use? 

Yes. Put a few drops of e-liquid on the cotton through the side ports, then let the pod or tank sit for five to ten minutes after filling. Skipping this step risks a burnt first draw that ruins the coil.

Can I use these in the Vinci S? 

Yes, but only with a VooPoo PnP X cartridge (sold separately). The standard Vinci S cartridges have built-in coils. The PnP X cartridge is the empty pod that accepts these press-fit coils.