VOOPOO PnP X MTL Pod Tank

VOOPOO PnP X MTL Pod Tank

A 26mm pod tank that does proper mouth-to-lung, built around VOOPOO's PnP X coil platform. The PnP X tank holds 2ml in its UK form, fills from the side through a silicone-stoppered port, and runs adjustable top airflow so you can pull it tight or open it toward RDL.

It ships with two coils: a 0.6ohm pre-installed and a 0.3ohm spare, plus a replaceable 510 MTL drip tip. The 510 connection drops it onto any compatible mod, or straight onto a Drag S2. If you want tank flexibility with a pod's simplicity, these MTL Tanks deliver.

Why vapers choose this:

• Two coils, two draw styles in one box, so you can run a tight MTL on the 0.6ohm today and step toward RDL on the 0.3ohm whenever the mood shifts.

• 26mm and 510-threaded, which means it sits flush and works on far more than just VOOPOO mods.

• PCTG body takes daily knocks without cracking, and the steel base handles the heat.

• Side filling through a stoppered port. Quick and clean.

• Replaceable 510 drip tip, so you are not stuck with one mouthpiece.

VOOPOO PnP X MTL Pod Tank Features

Top Airflow, Tuned by You

The air feeds from the top and adjusts by turning the ring, so you set the exact restriction you want. Wind it down for a tight cigarette-style MTL, or open it toward RDL when you fancy more air and vapour. Feeding the air from the top also keeps condensation away from the base, which helps with leaks.

Why Are the PnP X Coils the Draw Here?

This tank runs on VOOPOO's PnP X heads, and the MTL version takes the 0.3ohm and 0.6ohm specifically. They press in, no screwing. The 0.6ohm at roughly 18-23W suits Nic Salts at 10 or 20mg, and the 0.3ohm opens things toward a warmer RDL pull.

Built to Take a Knock

The body is moulded from PCTG, a tough plastic that shrugs off drops and resists e-liquid clouding far better than cheaper acrylics. Underneath sits a stainless steel base carrying the 510 thread and the coil contacts. It is a pod on the outside and a tank where it counts.

That 510 Base Changes Everything

Here is the useful bit. Pull the magnetic adaptor and the tank clicks into a Drag S2 like a native pod. Leave it on, and the 510 thread means it works on nearly any regulated mod you own. One tank, two homes, no compromise.

A Mouthpiece You Can Change

The 510 MTL drip tip is replaceable, so a chewed or lost tip is a cheap fix rather than a dead tank. Fair enough if you have thrown out gear over a broken mouthpiece before. You can also drop in a different 510 tip if you prefer a narrower bore for a tighter draw.

VOOPOO PnP X MTL Pod Tank Colours

Three understated finishes, each pairing the clear PCTG window with a metal base in a different tone. The window stays see-through on all three, so you can keep an eye on your level.

#buttons

• Black
• Grey
• Silver

Match your liquid to the coil rather than the colour. A 0.6ohm with 20mg salts, or the 0.3ohm with a 50/50 E-Liquid around 10mg, both suit this tank.

How to Set Up the VOOPOO PnP X MTL Pod Tank

Under five minutes, start to finish.

1. Pull the pod tank off the base or unscrew it from your mod.

2. Push your chosen PnP X coil into the base until it seats fully. The 0.6ohm comes pre-fitted if you are starting there.

3. Drip four or five drops of e-liquid onto the exposed cotton at the base of the coil so it is not bone dry before filling.

4. Open the side port and fill to around two-thirds, not to the brim, then close the stopper.

5. Stand the filled tank up and leave it for six to eight minutes so the wick saturates all the way through.

6. Fit it back on your device and begin at the low end of the coil's range, building up gradually.

What's in the VOOPOO PnP X MTL Pod Tank Box

• One PnP X MTL pod tank,

• a replaceable 510 MTL drip tip,

• a 0.6ohm coil already fitted,

• a spare 0.3ohm coil,

• and a user manual.

No mod and no e-liquid are included, so you will need a 510 device or a Drag S2 to run it, plus a bottle of your chosen liquid.

Fits Any 510 Mod and the VOOPOO Drag Series

The heading says it plainly: this is a 510-first pod tank. Thread it onto practically any regulated mod and it works, so a 510 Vape Mod you already own is all you need. For VOOPOO owners, the magnetic base lets it sit in a Drag S2 or Drag X2 as the native pod, so you can browse the matching Voopoo Drag Kits if you want the full setup.

One thing to keep straight. The MTL version accepts the PnP X 0.3ohm and 0.6ohm coils, not the sub-ohm DTL heads from the same family. Match the coil to this tank and you are fine. Every PnP X tank sold at Pirate Vapes ships with those two coils in the box.

About VOOPOO

VOOPOO made its name with the Drag line and the GENE chipset, but the quieter success has been the PnP coil system. The PnP X platform is the latest step: a four-layer, leak-resistant coil structure with thermally stable cotton, designed to hold flavour cleaner and last longer than the heads it replaced. Because the whole PnP X range shares one fitment, a single tank like this can move across VOOPOO's Drag S2 and Drag X2 and out to any 510 mod.

That cross-device thinking is what keeps the ecosystem sticky, and it is why the PnP name carries weight among UK vapers.

Stock Up and Save

A pod tank is only as good as the coils feeding it, so keep a few PnP X spares in the drawer and you will never be stuck mid-week. Grab a bottle of salts to match while you are at it. Pirate Vapes packs every tank with padding to protect the threads and window in transit.

All stock is TPD compliant, checkout is age-verified, and sales are over-18s only. Free Pirate Post lands on orders over £40.

Conclusion

The PnP X MTL pod tank is a smart pick for anyone who wants pod convenience without giving up tank flexibility. Two coils cover MTL through to RDL, the 510 base means it works on your mod and your Drag alike, and the tough PCTG build is made for daily carry.

It holds 2ml, primes in minutes, and rewards matching the coil to your liquid. Stock spare Voopoo PnP Coils, add a few Vape Accessories, or start browsing at Pirate Vapes.

FAQs

What devices does the PnP X tank fit?

Any mod with a 510 connection, plus VOOPOO's Drag S2 and Drag X2 through the magnetic base. It is not locked to VOOPOO gear.

Which coils does the PnP X tank take?

The MTL version uses PnP X 0.3ohm and 0.6ohm coils. The sub-ohm DTL heads from the PnP X range belong to the DTL tank, not this one.

How much e-liquid does the PnP X tank hold?

2ml in the UK TPD version. VOOPOO also makes a 5ml version for markets outside the UK, though UK tanks are capped at 2ml.

Is the PnP X tank MTL or DTL?

Both, up to a point. Wind the airflow shut for a tight MTL on the 0.6ohm, or open it and drop in the 0.3ohm for a warmer RDL draw.

What e-liquid should I use with the PnP X tank?

50/50 blends and nic salts up to 20mg suit the 0.6ohm. The 0.3ohm handles a slightly higher-VG mix at a warmer setting. Skip thick sub-ohm juice.

How do I stop the PnP X tank leaking?

Fill to two-thirds, not the top, prime the coil before first use, and seat it fully. Most leaks trace back to an overfilled tank or a half-fitted coil.