VooPoo TPP Pod Tank

Sub-ohm tank with a 510 thread and a magnetic pod connection. The VooPoo TPP Pod Tank holds 2ml under UK TPD rules, runs on VooPoo's TPP mesh coils, and ships with two coils in the box: the TPP-DM1 at 0.15ohm (60-80W) and the TPP-DM2 at 0.2ohm (40-60W).

Dual adjustable bottom airflow lets you tighten or loosen the draw to suit your preference. Stainless steel body, bottom fill port, three colour options. Designed originally for the Drag X Plus but works on any 510-threaded mod.

Why vapers choose this:

• TPP mesh coils ramp up fast and deliver sharper flavour than the older PnP coil system they replaced, which is the main reason VooPoo built this tank

• 510 threading with magnetic attachment means it clips onto the mod securely but still comes off easily for refilling and coil swaps

• Dual adjustable bottom airflow gives you genuine control over how tight or open the draw feels, from restricted DTL to wide-open clouds

• Stainless steel construction is solid in the hand and handles being knocked around better than the plastic pod tanks in VooPoo's lower-tier range

• Two coils included so you can try both wattage ranges out of the box before buying a full pack of VooPoo Coils

VooPoo TPP Pod Tank Features

TPP Coils Are the Upgrade

VooPoo built the TPP coil as the successor to the PnP series. Larger mesh surface, faster heating, thicker vapour. The difference is noticeable from the first draw. If you have used PnP coils before and thought they were decent, the TPP is a clear step up in both flavour and cloud density. The tank was designed around these coils, so the airflow and chamber proportions are optimised for how TPP heads heat e-liquid.

Dual Bottom Airflow That Actually Adjusts

Some tanks have adjustable airflow that barely changes the draw. This one does. Two airflow slots on the base let you go from wide-open DTL clouds right down to a noticeably restricted draw with more flavour concentration. Most sub-ohm vapers will land somewhere in the middle. But having the full range available means you can dial it in rather than just accepting whatever the tank gives you.

510 Thread Goes on Almost Anything

The TPP Pod Tank uses a standard 510 connection with an included adaptor, which means it fits on virtually any Vape Mod you already own. Designed for the Drag X Plus originally, but there is nothing stopping you from pairing it with a mod from a completely different brand. If it has a 510 pin, it works.

Built in Stainless Steel

Not plastic. Not aluminium alloy dressed up to look like steel. Actual stainless steel body. Heavier than cheaper tanks, yes. But it feels like a proper piece of hardware, and it does not scratch, crack, or flex when you tighten it onto a mod. Three colours available: Black, Silver, and Gunmetal.

Bottom Fill Without the Mess

Unscrew the base, fill through the port, screw it back on. The silicone seal around the fill hole keeps liquid from leaking out during the process, which is something not every bottom-fill tank manages to get right. Not as convenient as a top-fill system, honestly. But VooPoo prioritised airflow design over fill convenience, and the trade-off works in practice.

VooPoo TPP Pod Tank Colours

This is a tank, so colour is about matching your mod rather than anything else. Three options:

#buttons

• Black
• Silver
• Gunmetal

How to Set Up the VooPoo TPP Pod Tank

1. Unscrew the base of the tank and push a TPP coil into the pod section from below until it clicks into place.

2. Drop three to four drops of e-liquid directly onto the cotton visible through the coil ports to pre-saturate the wick.

3. Fill the tank with e-liquid through the bottom fill port. Do not overfill past the max line.

4. Screw the base back on firmly and leave the assembled tank sitting flat for about five minutes before your first draw.

5. Attach the tank to your mod using the 510 adaptor included in the box.

6. Adjust the dual bottom airflow to your preference and start vaping at the lower end of the coil's recommended wattage.

What's in the VooPoo TPP Pod Tank Box

One TPP Pod Tank in your selected colour, one TPP-DM1 0.15ohm coil, one TPP-DM2 0.2ohm coil, one 510 adaptor, and a user manual. No e-liquid, no mod, no battery included.

Pairs with Any 510-Threaded Mod in the VooPoo Range and Beyond

The TPP Pod Tank was built to sit on the Drag X Plus, but the 510 threading means it works on any mod with a 510 connection point. That includes the Drag 3, Drag S Pro, Drag Max, and essentially every other VooPoo mod that uses a 510 pin. It also works on mods from other brands. The only requirement is that the mod pushes enough wattage for the TPP coils: 40W minimum for the DM2, 60W minimum for the DM1.

The tank uses VooPoo's TPP coil family exclusively. PnP coils will not fit this tank. Make sure you are ordering TPP heads, not PnP, when buying replacements.

About VooPoo

VooPoo made its name with the original Drag mod. The GENE chip inside it delivered faster firing speed than most competitors at the time, and the resin panels became one of the most recognisable designs in vaping. The Drag series expanded from there into pod mods, pod kits, and now dedicated Vape Tanks like the TPP.

The TPP coil platform was VooPoo's answer to growing demand for better sub-ohm performance in a pod-style format, and the tank itself carries that engineering forward with adjustable airflow and a stainless steel build.

Stock Up and Save

The tank ships with two coils, but at sub-ohm wattage you will need replacements within a couple of weeks. Adding a pack of TPP-DM coils to the basket alongside the tank means you are covered for a good month without reordering.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging. TPD-compliant stock, age-verified checkout, over-18s only. Free Pirate Post on orders over £25.

Conclusion

The VooPoo TPP Pod Tank is a well-built sub-ohm tank that bridges the gap between pod convenience and traditional tank performance. The TPP mesh coils deliver strong flavour and dense vapour, the dual airflow actually gives you range, and the 510 connection means it fits on whatever mod you already own.

If you want a DTL Tank that takes two minutes to set up and performs consistently, this does the job. Browse more Vape Accessories at Pirate Vapes.

FAQs

What coils does this tank use?

TPP coils only. Not PnP. Common mix-up since VooPoo runs both platforms. The TPP-DM series is what you need. Two come in the box to get you started.

Will it fit on a non-VooPoo mod?

Yes. Standard 510 threading with an adaptor in the box. Any mod that fires at 40W or above and has a 510 pin will work.

What e-liquid ratio works best?

High VG. 70/30 or above with freebase nicotine at 3-6mg. These are sub-ohm coils running at 40-80W. Not suited for nic salts or 50/50 blends.

How do I refill the tank?

Bottom fill. Unscrew the base, fill through the silicone-sealed port, screw it back on. Takes about thirty seconds.

How long do the included coils last?

Roughly one to two weeks each depending on wattage and liquid. The DM2 at lower wattage tends to outlast the DM1. Sweeter liquids shorten both.

Is the 5.5ml capacity available in the UK?

The UK TPD version holds 2ml. The 5.5ml figure is the international capacity and may not apply to the version sold by UK retailers.