VooPoo Vinci 2 Replacement Pods

VooPoo Vinci 2 Replacement Pods

Keep your setup running smoothly with authentic VooPoo Vinci 2 Replacement Pods. Built specifically for the Vinci 2 and Vinci X 2 kits, these refillable empty pods give you full access to VooPoo's PnP coil family without locking you into fixed, built-in coils.

Each pack holds two pods made from clear PCTG plastic, so you can see the liquid level without guessing. Pick a PnP coil separately, press it in, fill through the side port, and you're back to vaping. Browse the full Replacement Pods collection if your current set has had its day.

Why vapers choose this:

• Clear PCTG shell shows exactly how much liquid is left.

• Magnetic top fitting clicks the pod onto the Vinci 2 or X2 in one motion, no wiggling required.

• Compatible with the full PnP coil range, from tight 1.2 ohm MTL through to looser sub-ohm options.

• Side-fill port with a silicone stopper keeps refills mess-free.

• Two pods per pack give you a spare for the day one starts leaking or its coil wears out.

VooPoo Vinci 2 Replacement Pods Features

Built From PCTG, Not Just "Plastic"

PCTG resists cracking and yellowing far better than standard PET, which is why VooPoo uses it across most of its pod range. The pod is see-through by design, so you'll notice the liquid level drop as you vape, rather than finding out it's empty from a dry hit.

Cost-Effective Replaceable Coil Design

VooPoo split the pod and coil on purpose. The pod handles liquid storage and lasts for weeks. The coil handles heating and wears out in days. Replacing only the part that's spent, rather than the whole Vape Pod, keeps ongoing costs lower than a fixed-coil system.

A Magnetic Connection That Actually Holds

Friction-fit pods can work loose and start rattling in the slot. The Vinci 2's magnetic fitting pulls the pod flush against the contacts every time. Strong magnets keep the pod firmly seated against the base contacts, preventing loose connection errors and wobble.

Refill Without Pulling Anything Apart

Open the silicone stopper on the side, tip the bottle in up to the fill line, and reseal. No cap to lose, no threaded port to cross-thread.

Built for the Vinci 2 Generation, Not the Original Vinci

"Vinci" covers several VooPoo devices with different pod shapes, an easy mix-up to make. These pods are cut specifically for the Vinci 2 and Vinci X2 housing and won't seat in an original Vinci, a Vinci Q, or a Vinci SE, nor will those pods seat here.

VooPoo Vinci 2 Replacement Pods Resistance Options

VooPoo ships the Vinci 2 kit with two coils in the box, and both fit these pods without modification. Anything from the wider PnP coil family also clicks straight in, provided its recommended wattage sits within your device's power range (up to 50W on the Vinci 2, or up to 80W on the Vinci X 2).

• PnP-VM1: 0.3Ω, 32 to 40W, restricted DTL

• PnP-TM2: 0.8Ω, 12 to 18W, MTL

• PnP-VM4: 0.6Ω, 20 to 28W, half-DL

• PnP-VM3: 0.45Ω, 25 to 35W, half-DL

• PnP-TM1: 0.6Ω, 20 to 25W, tighter MTL

• PnP-TR1: 1.2Ω, 10 to 15W, restricted MTL

How to Set Up the VooPoo Vinci 2 Replacement Pods

Quick swap, no tools needed.

1. Pull the old pod straight up and out of the Vinci 2 or X2. The magnets release with light pressure, no twisting.

2. Press a PnP coil into the base of the new pod until it clicks flush, picking the resistance from the options above.

3. Open the silicone stopper on the side of the pod.

4. Fill with e-liquid up to the 2ml line, keeping the centre airflow tube clear.

5. Reseal the stopper and let the pod sit for 5 to 10 minutes so the cotton wick fully saturates before firing.

6. Start at the low end of the coil's wattage range and adjust upward once you're happy with the draw.

What's in the VooPoo Vinci 2 Replacement Pods Box

Two empty pods. That's it. No coils, no e-liquid, no device. First order separate from a kit? You'll also need PnP coils and a bottle of e-liquid before you can actually vape with them.

Built Only for the Vinci 2 and Vinci X2

These pods aren't interchangeable with the wider Vinci family. They fit the VooPoo Vinci 2 and Vinci X2 kits, and nothing else.

The original Vinci, Vinci Q, Vinci SE, Vinci S, Vinci R, Vinci X and Drag Nano 2 all use a different pod profile with their own fixed magnetic fitting, so a Vinci 2 pod won't seat in any of them, and their pods won't fit a Vinci 2 either. Check your device generation before ordering, since "Vinci" alone covers several incompatible pod shapes.

About VooPoo

VooPoo built its reputation on the GENE chip family and the PnP coil platform, and the Vinci 2 runs both. Rather than sealing a coil inside every pod, VooPoo separated the two: the pod holds liquid, the coil handles vapour, and each part gets replaced on its own schedule.

That approach spread across the Drag and Argus series too, which is why such a wide library of PnP coils exists across a handful of resistance and wattage combinations, a genuinely different philosophy to brands selling one disposable pod-and-coil unit.

Stock Up and Save

Coils wear out long before pods crack, so keep a spare PnP coil on hand, and you'll get more mileage from each pod. Pick up a bottle of Nic Salts at the same time, and you're set for weeks, not days.

Pirate Vapes ships same-day on orders before 4 pm, and every order over £40 qualifies for Free Pirate Post. Age-verified checkout, over 18s only, TPD-compliant stock throughout.

Conclusion

The VooPoo Vinci 2 Replacement Pods do one job: hold your e-liquid and accept a PnP coil, in a shell built specifically for the Vinci 2 and Vinci X2.

Two millilitres, a magnetic fit, and access to VooPoo's full coil range mean you're never locked into one resistance. Check our wider Vape Accessories for chargers and cases, and browse the rest of the range at Pirate Vapes.

FAQs

Do these pods come with a coil fitted?

No. They're sold empty. You'll need to fit a VooPoo PnP coil separately before adding e-liquid.

Will a Vinci 2 pod fit my original Vinci or Vinci Q?

No. The Vinci 2 and Vinci X2 use a different pod shape and magnetic fitting to the rest of the Vinci range.

Why is the capacity only 2ml when VooPoo advertises more?

UK regulations cap refillable pods at 2ml. Every pod sold through Pirate Vapes meets that limit.

How often should I replace the pod itself rather than just the coil?

There's no fixed schedule. Replace the pod when it cracks, discolours, starts leaking from the seams, or the silicone stopper stops sealing properly.

Can I use any nicotine strength in these pods?

Yes, provided the e-liquid is legal for UK sale. Nic salts up to 20mg and freebase liquids both work, though your coil choice affects how comfortable a higher strength feels.