VooPoo Vinci Q Pod Kit

900mAh battery in a body that weighs around 40 grams. The VooPoo Vinci Q is built for people who want a pod kit that does one thing and does it well: clean MTL nic salt vaping with nothing to set up. The GENE AI chip reads the pod resistance and picks the wattage automatically between 11 and 15W. No screen, no menu, no adjustments.

You get dual firing (button press or draw-activated), a 2ml top-fill pod with a built-in 1.2-ohm mesh coil, and a full-view transparent cartridge so you always see your liquid level. Fixed airflow, tight MTL draw, USB-C charging. Six colour options at Pirate Vapes. TPD compliant, MHRA-notified. Over 18s only.

Why vapers choose the VooPoo Vinci Q Pod Kit:

• Around 40 grams makes it one of the lightest refillable pod kits on the UK market. The ABS and PC body is thin enough to disappear in a front pocket, and the two-tone textured finish means it does not slip around on surfaces or between fingers. If you have tried bulkier pod kits and wanted something closer to the size of a pen, this is in that territory.

• Dual firing means you pick how you vape without changing any settings. Flick between pressing the fire button with your thumb or simply inhaling on the mouthpiece. Both modes are always available, no toggle switch needed. If you like the simplicity of draw-activation from disposables but occasionally want the control of a button, the Vinci Q gives you both without asking you to choose.

• The GENE AI chip removes every decision about power. Slot in the 1.2-ohm pod and it runs at around 11W. Swap to the 0.8-ohm and it bumps up to roughly 15W. There is nothing to adjust, nothing to configure, and nothing to get wrong. For vapers who have no interest in wattage settings, this is exactly the right approach.

• The full-view transparent cartridge shows your liquid level at all times. No pulling the pod out to check. No guessing. When the liquid drops below the coil intake, you know it is time to refill. The top-fill system means you remove the mouthpiece, pull the silicone plug, fill, and close it without touching the pod itself.

• Cross-compatible with the Drag Nano 2 and Vinci Pod cartridge family. If you already own a Drag Nano 2, Vinci Pod, or Vinci Pod Royal Edition, the same replacement pods work across all of them. That means more options and less waste if you switch between devices.

VooPoo Vinci Q Pod Kit Features

900mAh Battery with LED Indicator

The 900mAh cell inside the Vinci Q handles a full day of moderate MTL vaping. The LED hidden beneath the fire button glows green when the battery is above 30% and switches to red when it drops below. USB-C at 5V/1A charges the device. The cable is included in the box. After five minutes of inactivity, the device auto-locks to prevent pocket firing.

GENE AI Adaptive Power Chip

No wattage buttons. No screen. The GENE AI chip reads the pod resistance and sets the power automatically. It fires in under one millisecond according to VooPoo, which means there is no noticeable delay between inhaling and the coil reaching temperature. The chip also manages all safety protections: overtime, short circuit, overcharge, over-discharge, and over-temperature.

Dual Firing: Button and Draw-Activated

Both firing modes are active at all times. Press the button on the front of the device, or simply inhale on the mouthpiece. There is no toggle, no setting to change. If you are moving from disposables, the draw-activation feels identical. If you prefer the deliberateness of pressing a button, that is there too.

Top-Fill 2ml Full-View Pod

The 2ml cartridge is built from transparent PCTG, so you see your liquid level without pulling anything out. To refill, pop off the mouthpiece, peel back the silicone plug, fill to the line, and close it. The magnetic connection holds the pod firmly in the device during daily carry. VooPoo recommends five minutes of priming before first use.

Two-Tone ABS + PC Moulded Body

VooPoo combines ABS and PC plastics in a two-tone injection mould that gives the Vinci Q its distinctive textured finish. The material is fade-resistant, scratch-resistant, oil-proof, dust-proof, and fingerprint-proof. At around 40 grams, the device is one of the lightest pod kits on the market. Six colour options across the range.

VooPoo Vinci Q Pod Kit Colours List

Six two-tone finishes across the range. The ABS and PC moulded body gives each colour a layered, textured look that photographs do not fully show. They are warmer and more interesting in person than you would expect from a budget pod kit.

#buttons

• Blue and Black
• Pink
• White
• Orange
• Green
• Blue

How to Set Up the VooPoo Vinci Q Pod Kit

1. Charge. Plug the included USB-C cable into the side of the device. The LED beneath the button shows red while charging and green when finished. Under an hour from flat to full at 5V/1A.

2. Fill. Pop the mouthpiece off the top of the pod. Pull the silicone plug out of the fill port. Squeeze your nic salt or 50/50 e-liquid in up to the 2ml line. Push the plug back in firmly. Replace the mouthpiece.

3. Prime. Leave the filled pod sitting in the device for five minutes. The 1.2-ohm mesh coil needs time to fully absorb the liquid. Skipping this means a burnt first draw.

4. Power on. Press the fire button five times quickly. The LED flashes to confirm.

5. Vape. Either press the fire button and inhale, or just inhale on the mouthpiece. Both methods work immediately. The GENE AI chip handles the power.

What's in the VooPoo Vinci Q Pod Kit Box

One VooPoo Vinci Q device, with ABS + PC body, GENE AI chip, LED indicator, and 900mAh battery in your chosen colour. One VooPoo Vinci Series V2 Cartridge 1.2-ohm (2ml, mesh coil, top-fill, MTL). One USB-C cable. One user manual. No e-liquid is included. Pick up a Nic Salt E-Liquid from Pirate Vapes for your first fill.

Pod Compatibility Built for the VooPoo Vinci Q

The Vinci Q shares its pod platform with several other VooPoo devices. If you already own a Drag Nano 2 or a Vinci Pod, your spare cartridges work here.

Compatible Pods:

• VooPoo Vinci Series V2 Cartridge 1.2 ohm (top-fill, mesh, MTL): Included in the kit. Dense, smooth flavour

• VooPoo Vinci Series V2 Cartridge 0.8 ohm (top-fill, mesh, MTL): Sold separately. Warmer draw, slightly more vapour

• VooPoo Vinci Pod Cartridge Mesh 1.2 ohm (top-fill): Cross-compatible, same as Drag Nano 2 1.2 ohm

• VooPoo Vinci Pod Cartridge Mesh 0.8 ohm (top-fill): Cross-compatible, same as Drag Nano 2 0.8 ohm

• VooPoo Vinci Pod Cartridge Mesh 1.2 ohm (side-fill): Alternative fill method, same resistance

• VooPoo Vinci Pod Cartridge Mesh 0.8 ohm (side-fill): Alternative fill method, slightly looser draw

Cross-Compatible Devices (same pods fit all of these):

• VooPoo Drag Nano 2

• VooPoo Vinci Pod

• VooPoo Vinci Pod Royal Edition

• VooPoo Vinci Pod SE

Not Compatible:

• VooPoo Vinci S cartridges (different platform)

• VooPoo Argus pods (different system)

• VooPoo PnP X pods (different connection)

• Any non-VooPoo pod

About VooPoo

VooPoo started in 2014 and built their name with the Drag mod series before expanding into pod kits. The Vinci Q sits at the simple end of their Vinci range, alongside the Vinci Pod and Drag Nano 2. Where the Vinci S adds adjustable airflow and higher power, the Vinci Q strips everything back to a fixed-airflow, adaptive-power MTL Pod with dual firing modes. The GENE AI chip handles power management, and the shared Vinci Pod cartridge platform keeps replacement costs down. Browse the full VooPoo Vapes collection at Pirate Vapes.

Stock Up and Save

The kit ships with one pod. That single cartridge lasts most vapers one to two weeks with nic salt e-liquids, but sweeter flavours burn through the mesh coil faster. Picking up a two-pack of Vinci Series V2 replacement pods alongside the kit means you are covered for a month or more.

At Pirate Vapes, we wrap every pod individually because PCTG cartridges crack if they rattle around loose in a box during transit. Every product is MHRA-notified, TPD compliant, and sold through age-verified checkout. Same-day dispatch before 4pm. Free Pirate Post over £25.

Conclusion

The VooPoo Vinci Q is the pod kit you buy when you do not want to think about vaping. No wattage to set, no airflow to adjust, no screen to navigate. Fill the pod, press the button or just inhale, and the GENE AI chip does the rest. At around 40 grams with a 900mAh battery, it lasts a full day and disappears in a pocket. The 1.2-ohm mesh coil delivers clean nic salt flavour, and the cross-compatibility with Drag Nano 2 and Vinci Pod cartridges means Replacement Pods are easy to find.

If you want the simplest possible refillable pod kit that still uses decent coil technology, this is the one to look at. Grab one from Pirate Vapes and pair it with a nic salt from our Refillable Pod Kits collection.

FAQs 

Can I adjust the wattage? 

No. The Vinci Q uses adaptive power. The GENE AI chip reads the pod resistance and sets the output automatically. There are no buttons for power adjustment.

Is it draw-activated or button-fired? 

Both. You can press the fire button or simply inhale on the mouthpiece. Both modes work at all times without needing to switch a setting.

How long does the battery last? 

The 900mAh battery handles a full day of moderate MTL vaping for most people. Lighter users can push into a second day. The LED turns red when the battery drops below 30%.

Is the USB-C cable included? 

Yes. The Vinci Q kit includes a USB-C cable, which is not always the case with pod kits at this price point.

Do Drag Nano 2 pods fit the Vinci Q? 

Yes. The Vinci Q shares its pod platform with the Drag Nano 2, Vinci Pod, and Vinci Pod Royal Edition. All their cartridges are cross-compatible.

Can I adjust the airflow? 

No. The Vinci Q has fixed pinhole airflow channels built into the body. The draw is tight MTL and cannot be loosened. If you want adjustable airflow, look at the VooPoo Vinci S instead.