VooPoo Vinci E80 Vape Kit

VooPoo Vinci E80 Vape Kit

The VooPoo Vinci E80 Kit is a refillable pod mod that pushes up to 80W from a built-in 3000mAh battery. A 1.47-inch TFT screen shows wattage, coil resistance, and battery at a glance. It runs on VINCI E cartridges, which have the coil built in, and a 0.3ohm pod comes fitted with a 0.6ohm pod in the box.

The UK pod holds 2ml and fills from the top. This is a device for vapers who want more power and control than a basic pod, with a fire button, adjustable wattage, and airflow. If you already use VooPoo PnP coils, the E80 works with PnP X coils through a separate empty cartridge. Pirate Vapes lists the Vinci E80 kit in the Refillable Pod Kits range.

Why vapers choose this:

• Up to 80W gives the power for lower-resistance coils and a warmer, bigger draw.

• 3000mAh battery is generous for a pod device and lasts well between charges.

• 1.47-inch TFT screen shows wattage, resistance, and battery clearly.

• VINCI E cartridges have the coil built in, so there is no separate coil to fit.

• PnP X support opens up a wider coil range through an empty cartridge.

VooPoo Vinci E80 Features

3000mAh Battery and 80W Output

The Vinci E80 pod kit runs a 3000mAh built-in battery and reaches 80W. That is a large cell and a high ceiling for a pod device, so it drives lower-resistance coils comfortably and holds charge across a full day of heavier use. It recharges over USB-C at 5V/2A.

1.47 Inch TFT Screen

A colour TFT screen reads out wattage, coil resistance, puff count, and battery level. On a device with adjustable power, this matters, because you can see exactly what you have set and how the coil is reading rather than guessing. The GENE.TT 2.0 chip handles the output and firing.

VINCI E Cartridges

The E80 uses VINCI E cartridges with the coil built into the pod. A 0.3ohm cartridge comes pre-fitted, and a 0.6ohm is included, covering a warmer restricted lung draw. When a coil tires, you swap the whole cartridge rather than fitting a bare coil. Keep a couple of Replacement Pods on hand for quick changes.

PnP X Coil Compatibility

Beyond the VINCI E cartridges, the E80 works with PnP X coils through a separate empty cartridge. That opens up VooPoo's wider PnP X coil range, so vapers already in the PnP ecosystem can use coils they know. The empty cartridge is bought separately.

Top Fill and Adjustable Airflow

Refilling is done from the top, which is cleaner and quicker than base-fill designs. An airflow slider on the device lets you tighten or open the draw to suit the coil, from a restricted lung pull to a more open one. The 2ml UK cartridge keeps the pod at the legal limit.

VooPoo Vinci E80 Colours

Pirate Vapes stocks the Vinci E80 in seven finishes, including two gradient options.

#buttons

• Gold
• Green
• Metal Gray
• Orange-Red Gradient
• Purple-Gold Gradient
• Rose Red
• Spray Black

How to Set Up the VooPoo Vinci E80

Getting started takes a couple of minutes with your own e-liquid.

1. Charge the device over the USB-C cable until the screen shows a full battery.

2. Remove the cartridge and open the top fill port.

3. Fill with e-liquid suited to the coil, then close the port. Higher-resistance coils suit nic salt; lower-resistance coils suit a higher-VG liquid.

4. Let the cartridge stand for a few minutes so the coil absorbs the e-liquid.

5. Fit the cartridge back into the device until it seats.

6. Set the wattage on the screen to the coil, then press the fire button and adjust the airflow to taste.

What's in the VooPoo Vinci E80 Box

The kit is supplied ready to fill with your own e-liquid:

• VooPoo Vinci E80 device

• VINCI E 0.3ohm cartridge (pre-installed)

• VINCI E 0.6ohm cartridge

• USB-C charging cable

• User manual

E-liquid is not included, so add a bottle suited to the coil you plan to use.

Made for the VINCI E and PnP X Coils

The VooPoo Vinci E80 runs VINCI E cartridges in 0.3ohm and 0.6ohm, and it also takes PnP X coils through a separate empty cartridge. Those are the pods and coils to use with it. It will not take PnP pods from other VooPoo devices or third-party pods.

Sitting among the higher-powered Pod Kits, it suits restricted lung and lower-resistance vaping rather than a tight cigarette-style draw alone.

About VooPoo

VooPoo is a well-established name in pod and mod vaping, known for its GENE chipsets and the PnP and VINCI coil platforms. The Vinci E80 sits at the powerful end of the Vinci pod range, adding an 80W ceiling, a 3000mAh battery, and a TFT screen to the refillable pod format.

It moves the Vinci line towards pod-mod territory while keeping the integrated-coil convenience. Pirate Vapes carries the Vinci E80 alongside other VooPoo kits and pods.

Stock Up and Save

A refillable pod mod keeps running costs down over sealed devices, and Pirate Vapes helps on the coil and e-liquid side with multi-buy savings across the range.

Orders go through an age-verified checkout for over 18s only, with same-day dispatch before 4 pm and Free Pirate Post over £40. Keep a spare VINCI E cartridge and a bottle of your usual e-liquid on hand, and the E80 is always ready to fill.

Conclusion

The VooPoo Vinci E80 kit is a refillable pod mod with up to 80W, a 3000mAh battery, a TFT screen, and top-fill 2ml VINCI E cartridges. It ships with 0.3ohm and 0.6ohm coils and opens up to PnP X coils through a separate cartridge, giving more power and control than a standard pod.

See the kit and its pods at Pirate Vapes, browse more Vape Kits, and add any Vape Accessories in the same order.

FAQs

What coils does the VooPoo Vinci E80 kit use?

The Vinci E80 uses VINCI E cartridges with the coil built in, in 0.3ohm and 0.6ohm. It also takes PnP X coils through a separate empty cartridge, so the wider PnP X range fits.

Is the VooPoo Vinci E80 refillable?

Yes, the Vinci E80 uses refillable 2ml cartridges that you fill from the top with your own e-liquid. When the built-in coil wears out, you replace the whole cartridge.

How powerful is the VooPoo Vinci E80 pod kit?

The Vinci E80 reaches up to 80W from a 3000mAh battery, which is high for a pod device. A TFT screen shows the wattage and coil resistance, so you can set the power to the coil.

What e-liquid should I use in the Vinci E80?

It depends on the coil. Higher-resistance cartridges suit nic salt for a tighter draw, while lower-resistance coils suit a higher-VG e-liquid for a warmer, more open vape.

Does the VooPoo Vinci E80 have a fire button and screen?

Yes, the Vinci E80 has a fire button and a 1.47-inch TFT screen. The screen shows wattage, resistance, and battery, and you set the power before firing.