VooPoo VMATE V2 Replacement Pods - Pack Of 2

VooPoo VMATE V2 Replacement Pods

Silver-ion tech built into a magnetic, integrated-coil pod cartridge for the Voopoo VMATE line. Each 2ml TPD-compliant cartridge clicks into place with a solid magnetic connection, no wiggling or misalignment, and comes with the coil already built in, so there is nothing extra to fit. Three resistances cover the full range from tighter MTL through to a looser RDTL pull, and the pod material is treated with silver-ion technology for a cleaner, more hygienic mouthpiece.

Compatible with the entire Voopoo VMATE and V.THRU device series, this is a straightforward way to keep your kit running without buying new hardware. It sits alongside the rest of the Vape Pods range for anyone comparing formats.

Why vapers choose this:

• Silver-ion material keeps the mouthpiece more hygienic between cleans, which matters on a pod you are drawing from several times a day.

• Magnetic connection means the pod seats properly every time. No loose fit, no rattle.

• Three resistances in one line, so MTL and RDTL vapers are both covered without switching devices.

• Integrated coils mean no separate coil to buy or fit. Replace the whole pod, and you are done.

• Comes as a genuine 2-pack, so you are never down to a single spare.

Voopoo VMATE V2 Replacement Pods Features

Integrated Mesh Coils

Some pod systems separate the coil from the cartridge, which is fine until you are standing there trying to press a tiny coil into place with wet fingers. The VMATE V2 pod skips that step entirely. The coil sits inside the cartridge from the factory, so replacing a worn pod is a straight swap. Old one out, new one in.

Antibacterial Silver-Ion Coating

Voopoo treats the pod material with silver-ion technology, which has a genuine antibacterial effect on the surface you are putting to your mouth repeatedly throughout the day. It will not replace regular cleaning, but it is a sensible bit of engineering on a component that gets more contact than almost anything else on the device.

Two Fill Systems

The 0.4Ω pod uses a top-fill design, while the 0.7Ω and 1.2Ω pods fill from the side, sealed with a silicone stopper. Different resistance, different internal layout, so Voopoo adjusted the fill point to suit. Either way, filling takes seconds, and the stopper keeps leaks out of your pocket.

Resistances for Both Draw Styles

At 1.2Ω, the pod delivers a tighter, warmer MTL pull that suits higher-strength e-liquid. Drop to 0.7Ω and the draw opens up into something closer to RDTL, with more vapour per pull. The 0.4Ω option pushes that further still. One cartridge family, genuinely different vaping styles depending on which you fit.

Magnetic Connection

Push-fit pods can work loose over weeks of use. The VMATE V2 uses a magnetic connection instead, which keeps the pod seated firmly against the contacts without needing a tight physical press-fit. Less wear on the housing, and a more consistent connection pull after pull.

Voopoo VMATE V2 Replacement Pods Resistance Options

Three resistances in the range, and the right one depends entirely on the kind of draw you are chasing.

#buttons

• 0.4Ω
• 0.7Ω
• 1.2Ω

How to Set Up the Voopoo VMATE V2 Replacement Pods

1. Remove the empty pod from the VMate device by pulling it free of the magnetic connection.

2. If filling a side-fill pod, pull back the silicone stopper; if it is the 0.4Ω top-fill version, open the cap on top instead.

3. Fill slowly with your chosen e-liquid, keeping the nozzle away from the central airflow tube.

4. Seal the fill point fully, pressing the stopper or cap back until it sits flush.

5. Leave the pod to rest for five minutes so the integrated coil cotton fully saturates before your first draw.

6. Click the pod back into the device using the magnetic connection and start with gentle, slow pulls.

What's in the Voopoo VMATE V2 Replacement Pods Box

Two pod cartridges in your chosen resistance, each with the coil built in and ready to fill. No device, no e-liquid, no charging cable. If you are not sure which resistance suits your vaping style, the MTL Vape Kits range is a useful reference point for how MTL and RDTL differ in practice.

Voopoo VMATE V2 Replacement Pods Compatibility

The VMATE replacement pod cartridge works across the entire Voopoo VMATE and V.THRU series. Compatible devices include the VMate, VMate E, VMate E2, VMate Infinity, VMate Pro, VMate Pro 2, VMate Max, VMate i2, and V.THRU Pro.

All of these kits share the same magnetic pod bay design, so swapping between resistances is quick and simple. (Note: The 0.4Ω pod is intended for 30W-capable VMate devices like the VMate Max, VMate E2, and VMate i2). Browse the full Voopoo Range at Pirate Vapes if you are shopping for a new base kit rather than a replacement cartridge.

About Voopoo

Voopoo built its name on pod systems that balance simplicity with genuine engineering, and the VMate line sits right at the centre of that reputation. Rather than treating the pod as a disposable afterthought, Voopoo added silver-ion material and a magnetic connection to a component most brands leave basic.

The result is a pod cartridge that holds up to daily refilling better than most, on a kit that has stayed popular through more than one hardware generation. It is a practical, no-nonsense approach that suits vapers who want their MTL setup to just work.

Stock Up and Save

Three resistances mean it is worth keeping more than one on hand, especially if your vaping style shifts between a tighter MTL pull in the morning and something looser later in the day.

Pirate Vapes dispatches every order same-day before 4 pm, with a fully age-verified checkout on every purchase. All stock is TPD compliant, over-18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The Voopoo VMATE Replacement Pod is a reliable cartridge for one of Voopoo's most popular product lines. Silver-ion material, a magnetic connection that actually holds, and three resistances that cover MTL through to RDTL in one range.

Pick the 1.2Ω for a tight cigarette-style pull, the 0.7Ω for something looser, or the 0.4Ω if RDTL is the goal. Browse the Replacement Pods collection for other compatible cartridges, check Pod Kits if you need a new base device, and head over to Pirate Vapes for same-day dispatch on your order.

FAQs

Which resistance should I pick?

1.2Ω for a tight MTL draw, 0.7Ω for something looser, 0.4Ω for the airiest RDTL pull (30W-compatible kits only).

Does the pod come with a coil fitted?

Yes. The coil is built into the cartridge, so there is nothing to fit separately.

What devices is this pod compatible with?

They fit the VMate, VMate E, VMate E2, VMate Infinity, VMate Pro, VMate Pro 2, VMate Max, VMate i2, and V.THRU Pro.

How do I fill the pod?

Side-fill with a silicone stopper on the 0.7Ω and 1.2Ω versions. Top-fill on the 0.4Ω.

How long does a pod cartridge last?

Most vapers get one to two weeks from daily use before flavour starts to fade.

Is there a larger capacity version?

Voopoo also lists a 3ml version internationally, though the 2ml pod is the one that meets UK capacity rules.