Aspire Guroo Replacement Coils 

Two resistances built for one tank. These are kanthal mesh sub-ohm coil heads made for the Guroo, Aspire's dedicated high-wattage DTL tank. Pick between the 0.3ohm at 40-50W for a slightly cooler draw with strong flavour definition, or the 0.15ohm at 60-70W if you want warmer vapour with heavier cloud output.

Both use a top-load spring seating system, so swapping takes seconds without having to disassemble the whole tank. Bottom-fed airflow, high VG friendly. Three coils per pack.

Why vapers choose the Guroo Coils:

• Kanthal mesh construction heats the full coil surface evenly, which means more consistent flavour from first puff to last across the coil's life

• Top-load spring seating makes the swap quicker than threaded coils; just lift out the old one and press in the new one from above

• Two sub-ohm resistances cover both moderate-wattage flavour vaping at 40W and warmer high-wattage cloud production at 70W

• Bottom-fed airflow pulls air directly across the coil from underneath, reducing the chance of dry hits even with thicker VG blends

• Built specifically for the Guroo tank so the fit is precise, with no aftermarket compatibility issues or guesswork

Aspire Guroo Replacement Coils Features

Mesh Across Both Resistances

Both the 0.15ohm and 0.3ohm use a kanthal mesh strip rather than wound wire. Mesh heats more surface area at once, which pulls more detail out of complex e-liquid profiles. If you have used round-wire coils in other sub-ohm tanks before, the improvement in flavour clarity is noticeable from the first draw.

Spring Seating Changes the Swap

Most sub-ohm coils thread in from the bottom of the tank base. The Guroo uses a top-load spring seating mechanism instead. You remove the top cap, lift the old coil out, drop a fresh one in, and the spring holds it firmly in place. The whole thing takes about fifteen seconds. Less mess, less fiddling. Honestly, it is one of the better coil-swap designs out there.

Bottom-Fed Airflow Keeps Up With VG

The air path in the Guroo enters from the base and passes directly over the coil before reaching the mouthpiece. That matters because it means thicker 70/30 Shortfills and high VG juice get proper airflow across the wick at all times. Less chance of dry hits, even when chain vaping at higher wattages.

40-70W Range Across Two Coils

The 0.3ohm sits at 40-50W for vapers who want flavour emphasis without excessive heat. The 0.15ohm pushes into the 60-70W zone for denser clouds and a warmer throat feel. Neither coil is designed for low-wattage MTL vaping, so this is purely a DTL Tank setup.

Guroo Exclusive, No Cross-Compatibility

These coils work with the Guroo and nothing else. Sounds limiting, but it also means the fit is engineered for one specific tank. No wobble, no leaking from loose tolerances, no wondering whether a coil from a different Aspire series will physically seat properly. If you own the Guroo, these are your only coil options.

Aspire Guroo Replacement Coils Resistance Options

Two options. Both sub-ohm, both mesh, both DTL. The choice comes down to wattage preference and how much cloud you want.

Best for flavour: the 0.3ohm mesh at 40-50W. Lower wattage means a slightly cooler draw, which tends to preserve more nuance in the flavour. Fruity and menthol blends come through especially well here. It also draws less power from your mod, so battery life stretches further between charges. If you vape 70/30 freebase at 3-6mg, this is a solid daily pick.

Best for clouds and warmth: the 0.15ohm mesh at 60-70W. More power, more vapour, warmer hit. Dessert and cream profiles work well at this wattage because the extra heat brings out the heavier notes. Burns through liquid faster though, so keep that in mind. You will refill more often.

• 0.3ohm: Flavour-forward, 40-50W, cooler draw

• 0.15ohm: Cloud-focused, 60-70W, warm and dense

How to Set Up the Aspire Guroo Replacement Coils

Simple swap thanks to the spring seating. Under two minutes.

1. Unscrew the Guroo tank from your mod and turn it upside down. Remove the base section.

2. Lift the old coil out from the top of the tank base. It sits on a spring, so a gentle pull upward is all it takes.

3. Take a fresh Guroo coil from the pack. Put four to five drops of e-liquid onto the cotton through the side wicking slots and the top opening.

4. Drop the new coil into the base from above. The spring will catch it and hold it firmly in position.

5. Reassemble the tank, fill with e-liquid, and let the assembled tank stand for about five minutes while the liquid works its way into the mesh from the wicking slots.

6. Start vaping at the lower end of the recommended wattage and increase gradually over a few draws.

What's in the Aspire Guroo Replacement Coils Box

Three coils in your selected resistance, sealed in an outer box. No e-liquid, no tank, no mod included. Just the coils.

Made Specifically for the Guroo by Aspire

These coils work with one Vape Tank and one only: Aspire's Guroo. The spring seating mechanism and coil dimensions are specific to how the Guroo is built internally, so they will not drop into any other tank in the Aspire Range. Not the Nautilus. Not the Cleito. Not the Atlantis. Each of those has its own coil platform. If your tank is something other than the Guroo, check Aspire's coil compatibility guide before ordering.

About Aspire

Aspire has been in the vape industry longer than most. They were among the first to bring the BVC (bottom vertical coil) design to market, and the Nautilus tank that followed became one of the most recognised vape tanks in the world. That was years ago now, but the engineering approach stuck.

The Guroo sits in Aspire's sub-ohm lineup alongside the Cleito and Athos ranges, aimed at vapers who want high-wattage DTL performance without the complexity of rebuildables. Aspire tends to design each tank with its own dedicated coil platform rather than cross-compatibility, which keeps the engineering tight.

Stock Up and Save

Three coils per pack. At higher wattages, you might burn through one in a week, maybe less with sweeter liquids. Having a spare pack means you are covered for a good month without needing to reorder mid-week.

Every order from Pirate Vapes ships same day before 4 pm in protective packaging, so your coils arrive undamaged. All stock is TPD compliant and sold to over-18s only through an age-verified checkout. Free Pirate Post kicks in on orders over £25.

Conclusion

The Guroo coils do exactly what they need to. Two mesh options at different wattages, a spring-loaded seating system that makes swaps painless, and a build quality that matches the Guroo tank's reputation.

If you own the Guroo and vape DTL with high VG freebase, these are your only coil option, and fortunately they are a good one. Browse more Aspire Coils or check out the full range at Pirate Vapes.

FAQs

What resistances are available for the Guroo coils?

Two. The 0.3ohm runs at 40-50W for a cooler, flavour-focused draw. The 0.15ohm runs at 60-70W for warmer vapour and bigger clouds.

Do the Guroo coils fit other Aspire tanks?

No. They only work with the Guroo. The spring seating and coil dimensions are unique to that tank and will not fit any other model in the Aspire lineup.

What e-liquid ratio works best with these coils?

70/30 VG/PG or higher with freebase nicotine. These are sub-ohm coils designed for direct-lung vaping, so thinner 50/50 blends or nic salts are not a good match. Stick with freebase at 3-6mg for the best results.

How long do the Guroo coils last?

Depends on wattage and liquid. The 0.3ohm at 40-50W typically lasts one to two weeks. The 0.15ohm at higher wattage tends to wear faster, roughly five to ten days with regular daily use. Sweeter liquids will shorten the lifespan on both.

How do I know when to replace a Guroo coil?

When the flavour starts tasting dull or slightly burnt. With mesh coils, the decline is usually noticeable rather than gradual. One day it tastes fine, the next it does not. That is your cue.