Dovpo Ayce Zytek 2.0 Replacement Pods

Dovpo Ayce Zytek 2.0 Replacement Pods

Run a Dovpo Ayce Pro 2, Ayce Mini 2, or Ayce Lite, and these are the pods that keep it going. The Dovpo Ayce Zytek 2.0 Replacement Pods come three to a pack.

Each holds 2ml and fills from the top. A mesh coil has been fitted inside each pod, available in 0.4Ω, 0.6Ω, and 0.8Ω resistances, thus allowing the user to adjust their vape draw to suit either an MTL or RDL inhalation style.

They fit the Zytek 2.0 platform only, not the original Ayce Pro or Ayce Mini, both of which take a different Replacement Pod. Keep a pack in the drawer and swapping a tired pod is a two-minute job.

Why vapers choose this:

• Three pods in every pack: The Ayce Zytek 2.0 pods ship three to a pack, so you have spares ready the moment a coil starts to fade rather than waiting on a reorder.

• Three mesh resistance options 0.4Ω, 0.6Ω, and 0.8Ω options let you set the draw from a tight MTL pull to an airier RDL one.

• 2ml top-fill design refills from the top through the pod, keeping things quick and low-mess.

• Integrated mesh coils heat evenly for steady flavour across the life of each pod.

• Direct Zytek 2.0 fitment drops straight into the Ayce Pro 2, Mini 2 and Lite with no adapters.

Dovpo Ayce Zytek 2.0 Pod Features

Integrated Mesh Coil

Every Zytek 2.0 pod has its mesh coil built in, so there is no coil head to seat separately. Mesh spreads the heat across a wider surface than a round wire, which keeps the flavour consistent and helps each pod hold up well through a tank. When the taste starts to drop off, you swap the whole pod rather than stripping it down.

Three Resistances for MTL and RDL

The Ayce Zytek 2.0 replacement pods come in three mesh resistances, so the same device can change character with a pod swap. The higher 0.8Ω suits a tight mouth-to-lung draw and higher-strength Nic Salts, while the lower 0.4Ω opens the draw out for restricted direct-lung vaping.

2ml Top-Fill Pod

Filling is done from the top: lift the fill cover, add your e-liquid, and close it again without pulling the pod apart. The 2ml capacity keeps the pods in line with UK limits. A balanced 50/50 E-Liquid wicks well through the 0.6Ω and 0.8Ω pods.

Built for the Ayce Pod Family

These pods are cut specifically for the Zytek 2.0 platform, which covers the Ayce Pro 2, Ayce Mini 2, and Ayce Lite. The fit is direct, with the same magnetic seating across all three devices, so one pack of pods keeps any of them running.

Simple Pod Swaps

There is nothing to rebuild. Pull the spent pod, drop in a fresh one, fill and go. That makes the Ayce Zytek 2.0 pods an easy consumable to live with, and a High VG E-Liquid suits the 0.4Ω pod if you lean towards RDL.

Dovpo Ayce Zytek 2.0 Pod Resistance Options

Three mesh resistances cover the range from a tight cigarette-style draw to a looser restricted direct-lung one. Match the pod to how you like to vape and to the e-liquid you run.

The 0.8Ω pod is the natural starting point for mouth-to-lung vapers. It gives a tighter, warmer draw that suits nic salts and 50/50 blends at higher strengths, and it is the most economical on e-liquid.

The 0.6Ω pod sits in the middle. It loosens the draw slightly over the 0.8Ω while staying on the restricted side, which makes it a flexible all-rounder for 50/50 juice.

The 0.4Ω pod opens things up for restricted direct-lung vaping. It pulls more air and more vapour, so it pairs best with higher-VG e-liquid at a lower nicotine strength.

#buttons

• 0.4Ω Mesh
• 0.6Ω Mesh
• 0.8Ω Mesh

How to Swap the Dovpo Ayce Zytek 2.0 Pod

1. Pull the old pod straight out of the device. The magnetic connection releases with a firm tug.

2. Prime a fresh pod by adding two or three drops of e-liquid onto the exposed coil ports before filling.

3. Open the top-fill cover and add your e-liquid, keeping clear of the central airflow tube, then close the cover firmly.

4. Seat the new pod into the device until the magnets grip.

5. Let the pod stand for a few minutes so the coil wicks through fully, which prevents a dry first draw.

6. Take a few gentle pulls to start, then vape as normal.

What's in the Dovpo Ayce Zytek 2.0 Pod Pack

Each pack contains:

• 3 x Dovpo Ayce Zytek 2.0 replacement pods (2ml, with integrated mesh coil)

No device, e-liquid, or charging cable is included, since this is a replacement pod pack rather than a full kit.

Made for the Dovpo Ayce Zytek 2.0 Platform

The Ayce Zytek 2.0 pods fit the Zytek 2.0 devices only: the Dovpo Ayce Pro 2, Ayce Mini 2 and Ayce Lite. They do not fit the original Dovpo Ayce Pro or Ayce Mini, which use an earlier pod, so check which generation you own before ordering.

If the pod packaging does not say Zytek 2.0, it is not for these devices. For the devices themselves, browse our Refillable Pod Kits selection at Pirate Vapes.

About Dovpo

Dovpo has built a name in vaping hardware for well-made pod systems and mods that keep running costs sensible. The Ayce pod family is its compact, refillable line, and the Zytek 2.0 platform is the current generation, powering the Ayce Pro 2, Mini 2, and Lite.

Keeping the coil inside a swappable pod, rather than as a separate head, is what makes these devices quick to maintain. Matching Zytek 2.0 pods to the right device is all it takes to keep flavour fresh.

Stock Up and Save

Pods are a consumable, so it pays to keep a pack or two in. Order before 4 pm and Pirate Vapes dispatches the same day, with Free Pirate Post over £40.

The Crow's Nest subscription can post fresh pods on a schedule with a saving built in, and Multi-Buy Savings bring the per-pack price down. Checkout is age-verified; over-18s only.

Conclusion

The Dovpo Ayce Zytek 2.0 Replacement Pods are the direct-fit spares for the Ayce Pro 2, Mini 2 and Lite: three 2ml top-fill pods per pack, each with an integrated mesh coil, in a choice of 0.4Ω, 0.6Ω and 0.8Ω.

Match the resistance to your draw and your e-liquid, and a spent pod is swapped in seconds. Keep a pack ready alongside your MTL Vape Kits at Pirate Vapes.

FAQs

Which devices do the Dovpo Ayce Zytek 2.0 pods fit?

The Ayce Zytek 2.0 pods fit the Dovpo Ayce Pro 2, Ayce Mini 2, and Ayce Lite. They do not fit the original Ayce Pro or Ayce Mini, which use an earlier pod.

How many pods come in a pack of Ayce Zytek 2.0 pods?

Each pack contains three replacement pods. Buying in threes means you always have a spare ready when a coil starts to lose flavour.

What resistances do the Zytek 2.0 replacement pods come in?

There are three mesh options: 0.4Ω, 0.6Ω and 0.8Ω. The 0.8Ω gives a tight MTL draw, the 0.6Ω sits in the middle, and the 0.4Ω opens up for restricted direct-lung vaping.

Can the Dovpo Ayce Zytek 2.0 pods be refilled?

Each pod is refillable through the top-fill cover, so you top up with your own e-liquid rather than buying a new pod each time. Replace the whole pod once the coil inside wears out.

What e-liquid works best in the Ayce Zytek 2.0 pods?

Nic salts or a 50/50 blend suit the 0.8Ω and 0.6Ω pods for a tighter draw. The 0.4Ω pod is happier with a higher-VG e-liquid at a lower strength for RDL vaping.

Why does a new Ayce Zytek 2.0 pod taste weak at first?

A fresh coil needs a minute to wick through. Prime it with a few drops, fill it, and let it stand before the first draw, and the flavour comes through properly.