Aspire Flexus Pro Replacement Pods

Aspire Flexus Pro Replacement Pods

The Aspire Flexus Pro Pods are 2ml refillable pods, each fitted with a non-removable mesh coil. Resistances of 0.6ohm and 1.0ohm are offered, and every pod is filled through a side port that is closed with a silicone stopper. Two pods of the same resistance are supplied in each pack.

The 1.0ohm pod gives a tight mouth-to-lung (MTL) draw, while the 0.6ohm pod is looser. When a pod is spent, it is replaced with a fresh one, so no coil ever has to be changed by hand. Only the Flexus Pro kit takes these pods.

What to Know About the Flexus Pro Replacement Pods

• 2ml capacity per pod, refilled from the side
• Pack of two pods, mesh coil fixed in each
• 0.6ohm for a looser draw, 1.0ohm for MTL
• Fits the Aspire Flexus Pro kit only
• Not made for the Flexus Q, Flexus Stik or Flexus AIO systems

Features of Aspire Flexus Pro Replacement Pods

The coil, the liquid chamber and the fill port are combined in a single part. Each pod belongs to the wider Replacement Pods range, and the features below describe how it behaves.

Built-In Mesh Coil

A mesh coil is fixed inside each pod. The coil cannot be removed or rebuilt, so a pod is replaced as one unit once the flavour fades. Heat is spread across a wide surface by the mesh, which suits the small 2ml chamber. No hand priming is needed.

2ml Pod Capacity

2ml is the amount of liquid each pod takes, matching the UK cap on refillable pods. The capacity is identical for both resistances, so the choice between them changes the draw and not the amount of liquid. Refills come from an ordinary bottle. A pod can be topped up again as often as it is needed, until the flavour starts to fade and the whole pod is due for replacement.

Side-Fill Silicone Stopper

Filling starts by pulling out the silicone stopper set into the flank of the pod, which exposes the fill port. E-liquid is added through the port, and a firm push on the stopper closes it again. The pod is taken out of the device first, which keeps the kit clean while filling is under way.

0.6ohm Pod for a Looser Draw

A more open draw than the 1.0ohm version is given by the 0.6ohm pod, with more vapour per draw. That airflow feel is what Flexus Pro 0.6ohm pods are chosen for. Because the coil is built in, the resistance is decided when the pack is bought and cannot be altered afterwards.

1.0ohm Pod for MTL Vaping

The 1.0ohm pod holds the draw back for a restricted, MTL-style inhale that keeps flavour concentrated. Flexus Pro 1.0ohm pods are chosen by anyone who vapes MTL. Capacity and fill port match the 0.6ohm version.

Flexus Pro Replacement Pod Resistance Options

Pirate Vapes lists two resistance options for the pack of two pods.

#buttons

• 0.6 Ohm
• 1.0 Ohm

How to Swap the Flexus Pro Replacement Pods

A spent pod is taken out of the kit and a filled one is fitted in its place. The swap is covered from start to finish below.

Step 1: Remove the used pod from the Flexus Pro kit and set the new pod beside it.

Step 2: Lift the side stopper out of the new pod so the fill port is exposed.

Step 3: Fill the pod with e-liquid, such as a bottle from the Nic Salts range, keeping the level within the 2ml capacity.

Step 4: Press the plug home, then stand the pod upright for a short while, giving the coil time to soak.

Step 5: Fit the pod into the kit and take gentle first draws before settling into normal use.

What's in the Flexus Pro Replacement Pods Pack

Each pack contains the pods and nothing else.

• 2 x Aspire Flexus Pro replacement pods, 2ml each, with built-in mesh coils
• Both pods share the resistance chosen at the time of ordering

The Flexus Pro kit and the e-liquid are not included.

Devices Compatible With the Flexus Pro Replacement Pods

The Aspire Flexus Pro pod kit is the one device confirmed to take this pod. Kits are listed under Refillable Pod Kits for anyone who still needs one.

A shared range name does not mean a shared pod. The Flexus Q, Flexus Stik and Flexus AIO systems use different pods, and these will not fit them. Checking the name on the kit before ordering avoids a wrong pack.

About Aspire and the Flexus Range

The Flexus range from Aspire is made up of separate pod systems, with each one taking a pod of its own design. The Flexus Pro, Q, Stik and AIO belong to it, and pods are matched to the device instead of being shared between them.

For the Flexus Pro, that design gives a pod with its own mesh coil and a side-fill port, so upkeep comes down to filling and swapping. Other Aspire pods, kits and hardware are gathered on the Aspire Vapes page.

Stock Up on the Flexus Pro Replacement Pods

Keeping a second pack to hand means the kit is ready the moment one pod runs out, and one pack of each resistance settles the looser-against-tighter question over time.

Orders for Aspire Flexus Pro spare pods placed at Pirate Vapes before 3:30pm, Monday to Friday, leave the same day. Extra packs can be added through Multi-Buy Vapes; checkout is limited to verified adults over 18.

Conclusion

The Flexus Pro Replacement Pods are for owners of the Flexus Pro kit who want a pod that arrives with the coil already fitted. The 1.0ohm pack suits MTL vapers and the 0.6ohm pack suits a looser draw.

Bottles to fill them are available in 10ml E-Liquids, and the full range can be browsed at Pirate Vapes.

FAQs

Which device do the Aspire Flexus Pro Replacement Pods fit?

The pods are made for the Aspire Flexus Pro pod kit. They are not intended for the Flexus Q, Flexus Stik or Flexus AIO systems, which take their own pods.

How many pods come in a pack of Flexus Pro Replacement Pods?

A pack holds two pods of the same resistance. Each one has a 2ml capacity and a built-in mesh coil.

What is the difference between the 0.6ohm and 1.0ohm Flexus Pro pods?

The 0.6ohm pod gives a looser, more open draw, while the 1.0ohm pod gives a tighter mouth-to-lung pull. The capacity, the fill port and the fit are the same for both.

Can the coil in an Aspire Flexus Pro Replacement Pod be changed?

Coils cannot be swapped, as the mesh element is sealed into the pod. A fresh pod is fitted once the flavour fades.

How are the Flexus Pro pods refilled?

Refilling begins by lifting out the side stopper. E-liquid goes in up to 2ml, the stopper is pressed back, and a short wait follows before the first draw.

Do the Aspire Flexus Pro Replacement Pods contain nicotine?

Supplied empty, the pods contain no nicotine of their own, so any nicotine comes from the e-liquid added by the buyer, which is limited to 20mg/ml in the UK.