Geekvape M Series Coils

Single mesh. Dual mesh. Triple mesh. Quadra mesh. The M Series is Geekvape's cloud-chasing coil range, and each option adds more mesh strips inside the housing for denser vapour and richer flavour at progressively higher wattage.

They are built for one tank: the Z Max (Zeus Max), which ships with kits like the L200 Classic. Four coils covering 55W to 100W, all press-fit, all DTL, all sold in packs of 5. Pair them with a thick High VG E-Liquid for the best results. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• Four mesh configurations from single up to quadra, each with a different character.

• Big surface area coils built for dense clouds and bold flavour.

• Press-fit installation, no threading, just push in and go.

• 55W to 100W spread covering moderate and heavy DTL use.

• Five to a pack, with each coil lasting one to two weeks at daily DTL wattage.

Geekvape M Series Coils Features

Single, Dual, Triple, Quadra

Each coil adds more mesh strips. Single (M0.14) is the entry point: one strip, 60 to 80W, clean and responsive. Dual (M0.3) runs two strips at a lower 55 to 65W, denser and warmer. Triple (M0.2) pushes to 70 to 85W with three strips for serious vapour. Quadra (M0.15) is the full send: four mesh strips at 85 to 100W, the thickest cloud this tank can produce.

Oversized for a Reason

The M Series coils are physically larger than standard sub-ohm coils. That extra size means more cotton, more mesh surface area, and more room for e-liquid to flow through. At high wattages, that matters. A bigger coil keeps up with the juice demand and avoids the dry hits that smaller coils suffer when pushed hard.

Press-Fit, One Motion

The coil pushes into the Z Max tank base and holds by friction. No screwing, no aligning. One push in, one pull out. The fit is firm enough that the coil does not shift during use, even when the tank gets warm.

Z Max Tank Only

Worth being clear: the M Series coils fit the Z Max (Zeus Max) Tank and nothing else. Not the Zeus Sub-Ohm, not the Zeus X, not the Z Nano. The Z Max has a wider bore and a different coil seat, so other Geekvape coils will not fit it and M Series coils will not fit other tanks. Check your tank name.

High-VG Territory

At 55W and above, thin juice floods the coil and mutes the flavour. The M Series wants 70%+ VG, a proper 70-30 Shortfill or max-VG blend. That thicker juice feeds the mesh evenly at high power and keeps the flavour dense. Nic salts and 50/50 are not the right pairing for these coils.

Geekvape M Series Coils Resistance Options

No flavour to choose. These are empty coils, you fill the tank yourself. Four mesh configurations.

• 0.14 Ohm Mesh (M0.14) - single mesh, 60 to 80W, clean and responsive DTL

• 0.3 Ohm DC Mesh (M0.3) - dual mesh, 55 to 65W, warmer with dense flavour

• 0.2 Ohm Triple Mesh (M0.2) - triple mesh, 70 to 85W, big cloud, rich taste

• 0.15 Ohm Quadra Mesh (M0.15) - quad mesh, 85 to 100W, maximum vapour and flavour

More mesh strips = more vapour, but also more wattage and more juice consumption. The M0.14 single mesh is the efficient pick. The M0.15 Quadra is for cloud chasers who do not mind burning through juice. All four need thick, high-VG juice at 70% or above. Browse our E-Liquid Range for the right bottle.

How to Set Up the Geekvape M Series Coils

1. Unscrew the Z Max tank base and pull the old coil straight out.

2. Push the new M Series coil firmly into the base until it stops.

3. Dab some juice into the mesh and cotton visible through the openings to pre-soak.

4. Reassemble the tank, fill with high-VG e-liquid, and let it sit for five to ten minutes.

5. Start at the low end of the coil's wattage range and increase over the first few puffs.

What's in the Geekvape M Series Coils Box

Five mesh coils in the configuration you choose. No tank, no device, no e-liquid. You will need a thick high-VG juice to fill the tank. At these wattages you will get through it quickly, so a couple of bottles is a smart move.

Made for the Geekvape Z Max (Zeus Max) Tank

The M Series fits the Z Max tank exclusively, including when it ships as part of the L200 Classic Kit. No other Geekvape tank takes these coils, not the Zeus Sub-Ohm, not the Zeus X, not the Z Nano, not the Z Fli. 

The M Series coils are physically larger and use a different coil seat, so forcing one into the wrong tank will not work. Check your tank name before ordering. Browse our Geekvape Collection for the kits, and the coils section for the full range.

About Geekvape

Geekvape built the Aegis range around durability, but the Z Max tank and M Series coils are where the brand shows off its cloud engineering. Oversized coils with up to four mesh strips, high-wattage output, and a tank built to feed them without flooding or leaking.

The M Series is not for beginners, it is for vapers who have a mod with the wattage to drive them and the juice budget to keep them fed. For DTL cloud chasers on the Geekvape platform, the M Series is the top of the line.

Stock Up and Save

At 60W to 100W, these coils drink juice. Budget for a coil a week on heavy use, and two to three bottles of Shortfills alongside each coil pack to avoid running dry mid-week. Genuine Geekvape, dispatched tracked, age-verified checkout. Over 18s only. Browse Multibuys for bundle pricing on juice.

Conclusion

Four mesh configurations for one tank, each adding more surface area and more cloud. The M Series is purpose-built DTL: big coils, high wattage, thick juice, serious vapour. If you run a Z Max tank on an Aegis Legend 2 Classic or similar mod, these are the only coils it takes.

Pick the mesh count, match the wattage, and go. Grab a 5-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

What is the difference between single, dual, triple and quadra mesh?

More mesh strips means more heating surface inside the coil. Single is cleanest and most efficient. Dual is warmer. Triple pushes bigger cloud. Quadra is maximum vapour and flavour at the highest wattage.

Will these fit my Zeus Sub-Ohm tank?

No. The M Series coils only fit the Z Max (Zeus Max) Tank. The Zeus Sub-Ohm uses its own coils. Check the name on your tank.

Which coil uses the least juice?

The M0.3 Dual at 55 to 65W is the lowest-wattage option. The M0.14 Single at 60 to 80W is efficient too. The M0.15 Quadra at 85 to 100W uses the most.

Can I use nic salts in these coils?

Not recommended. At 55W and above, nic salt strengths produce far too much vapour and throat hit. Use freebase e-liquid at 3 to 6mg in a high-VG ratio.

How long does a coil last?

One to two weeks of daily DTL use. Sweet juices and chain vaping shorten the life. Lighter juices and moderate use stretch it further.

What VG ratio should I use?

70% VG or higher. Thinner 50/50 juice floods the coil at high wattage, causing leaking and muted flavour.