GeekVape Obelisk 60 AIO Pod Vape Kit

GeekVape Obelisk 60 AIO Pod Vape Kit

A refillable pod, two sub-ohm coils, and 60 watts to play with. The GeekVape Obelisk 60 AIO pod vape kit is an all-in-one device for vapers who want to fill their own juice and control the draw. A 2200mAh battery drives 5 to 60W of adjustable power through GeekVape's P Series coils, with a 2ml side-filling pod and a colour screen showing where everything sits.

It runs a sub-ohm DTL style, takes high-VG liquid, and charges over USB-C with the cable in the box. A solid, refillable step up from prefilled pods, and one of the more dependable Refillable Pod Kits GeekVape has put out.

Why vapers choose this:

• You refill it, so the running cost is just e-liquid. No prefilled pods to keep buying, which is where a refillable kit earns its keep over time.

• 60 watts of adjustable power across a proper screen, so you set the draw rather than living with a fixed one.

• Two coils in the box, a 0.4ohm and a 0.5ohm, so you can find your preferred balance of cloud and coil life straight away.

• A big 2200mAh battery for the size, which sees most vapers through a full day.

• The USB-C cable is included, which is a small thing that a lot of kits get wrong.

GeekVape Obelisk 60 Features

60 Watts, Your Way

The Obelisk fires from 5 up to 60W, adjusted with two buttons and shown on the colour screen. That range covers a gentle warm-up on a 0.5ohm coil right through to full sub-ohm clouds on the 0.4ohm. It runs Power and Bypass modes, so you either set an exact wattage or let it fire straight off the battery. Simple, and enough control for most people without getting fussy.

P Series Coils, Swapped in Seconds

The pod takes GeekVape's P Series Coils, which press-fit into the base rather than screwing in. Pull the old one, push the new one, done. No threads to cross and nothing to seize up. The coils are known for strong flavour and dense vapour, and keeping a spare or two on hand means you are never stuck with a burnt one.

Fills From the Side, Seals Tight

Topping up is quick. Ease out the silicone stopper on the side of the pod, drip your juice in to the 2ml line, and press the stopper back until it sits flush. The pod is made from a semi-clear plastic so you can keep an eye on the level, and the magnetic connection clicks it back onto the device without any fuss.

A Screen That Tells You Everything

The 0.96-inch TFT screen shows your wattage, coil resistance, and battery level at a glance. No guessing where the charge sits or whether you nudged the power. It is a small, clear display that does its job.

GeekVape Obelisk 60 Colour Options

Four colours are stocked, so you can match the Obelisk to the rest of your kit or keep it low-key. Every finish is the same device inside, so pick on looks alone.

#buttons

• Black
• Gunmetal
• Silver Blue
• Silver Green

E-Liquid and Nicotine

Because both coils are sub-ohm, reach for high-VG juice rather than thin, high-PG liquid. A 70/30 Shortfill or thicker wicks properly at these resistances and clouds well, while thin liquid can lead to dry hits.

Keep the nicotine low, since strong salts at sub-ohm power taste harsh and deliver far more nicotine than you want. Browse High-VG E-Liquid to pair with it. Nicotine is addictive, and this kit is for existing adult vapers only.

How to Fill and Prime

A couple of minutes before the first vape.

1. Remove the pod from the device and press-fit your chosen coil into the base.

2. Ease out the silicone stopper on the side of the pod.

3. Fill with high-VG e-liquid up to the 2ml line, then press the stopper back until sealed.

4. Refit the pod so the magnets click it into place.

5. Give a fresh coil a good ten minutes to wick before you fire it, which stops it burning dry.

6. Start at the lower end of the coil's range and build the wattage up until the flavour peaks.

What's in the Box

GeekVape packs everything you need to start refilling straight away. Inside you get:

• the Obelisk 60 device,

• one 2ml refillable pod,

• two P Series coils (a 0.4ohm pre-installed and a 0.5ohm spare),

• a coil tool for swaps,

• a USB-C charging cable,

• and the user manual.

You only need to add your own high-VG e-liquid.

Made to Refill, Not Replace

The Obelisk 60 is a keep-it device. You refill the pod, change the coil when it fades, and recharge the battery, rather than binning anything. When the pod itself wears out, a fresh Replacement Pod from Pirate Vapes drops straight in. Over a few months, that is far cheaper than working through prefilled pods or, before the ban, disposables.

About GeekVape

GeekVape built its name on tough, reliable hardware, best known for the Aegis line and its knack for devices that survive knocks and last. The Obelisk range is its take on the all-in-one pod mod: fewer frills than a full box mod, but the same focus on a solid build and a dependable chip.

That reputation for durability is a big part of why the GeekVape kit stays on UK shelves. See the wider GeekVape Range for the rest of the line.

Stock Up and Save

The value case for a refillable kit is simple: you pay for the device once, then the ongoing cost is a bottle of juice and the odd coil. Over a few months, that works out far cheaper than buying prefilled pods week after week.

Grab a spare set of P coils and a bottle of high-VG liquid alongside the kit, and you are set for a good while. Every order from Pirate Vapes ships same day when placed before 4 pm, and all stock is age-verified at checkout, strictly over-18s only. Free Pirate Post lands on orders over £40.

Conclusion

The GeekVape Obelisk 60 is a straightforward refillable AIO for anyone stepping up from prefilled pods: 60 watts of adjustable power, two P Series coils in the box, a side-filling 2ml pod, and USB-C charging with the cable included.

Fill it, dial your power, and refill rather than replace. Browse more Vape Accessories and the full lineup at Pirate Vapes.

FAQs

Is the Obelisk 60 refillable?

Yes. It uses a refillable 2ml pod that you fill with your own e-liquid, and swappable P Series coils. It is not a prefilled or disposable device.

What coils does the Obelisk 60 take?

GeekVape P Series coils. It comes with a 0.4ohm (50 to 60W) and a 0.5ohm (40 to 50W), both press-fit.

What e-liquid should I use with the Obelisk 60?

High-VG, 70/30 or thicker, at low nicotine. Both coils are sub-ohm, so thin high-PG juice and strong salts will taste harsh.

Does the Obelisk 60 come with a charging cable?

Yes. A USB-C cable is included in the box, along with a coil tool and both coils.

Is the Obelisk 60 MTL or DTL?

Direct-to-lung. The included sub-ohm coils are built for a warmer, airier draw rather than a tight cigarette-style one.

How big is the Obelisk 60’s battery?

2200mAh built-in, charged over USB-C, which sees most vapers through a full day.