GeekVape Obelisk 60 Replacement Pods

GeekVape Obelisk 60 Replacement Pods

Empty pod worn out, or the coil finally tasted burnt? These are the 2ml refillable Obelisk 60 Replacement Pods, built to keep your Geekvape Obelisk 60 running like new. Each pod ships with a 0.4ohm P mesh coil pre-installed and a spare 0.5ohm P coil, both sub-ohm and tuned for direct-to-lung vaping.

Side-fill with a silicone stopper, magnetic click connection, and full P Series compatibility for later. If you own the Obelisk 60, these are the exact Replacement Pods you need. Fill them with High VG E-Liquid, and you are back in business.

Why vapers choose this:

• Two coils in every pod. The 0.4ohm is fitted and ready, and the spare 0.5ohm sits in the pack for when the first one fades, so you get two coil lives out of a single purchase.

• No thread, no fuss. The magnetic click connection means the pod snaps on and off in a second.

• Side-fill with a silicone stopper that keeps refills tidy and cuts down on leaks.

• Full P Series compatibility. When you want a different draw, the wider P coil range drops straight in.

• Genuine Geekvape spares, not a copy that fits loosely and floods your device.

GeekVape Obelisk 60 Pod Features

Press-Fit Coils Make Swaps Painless

The P Series coils push straight into the base of the pod. No screwing, no cross-threading, no tiny grub to lose. Pull the old one, press the new one home, done. Honestly, it is one of the quicker coil swaps going, and it keeps you from binning a pod just because the coil died.

Why High VG Only?

Because these coils are sub-ohm. A 0.4ohm or 0.5ohm mesh coil runs at DTL wattages and needs thicker liquid to keep up. Feed it a 70/30 or higher and the mesh wicks properly. Pair it with one of our 70/30 Shortfills and the flavour comes through clean.

Side-Fill, Sealed Tight

Refilling is a side job here. Lift the silicone plug, fill the 2ml chamber, press the plug back in. The seal is snug, which is exactly what you want in a pocket. Simple to live with day to day.

The pod also features an adjustable top-airflow ring right below the mouthpiece, which routes air from top to bottom. This design makes the pod highly leak-resistant.

Mesh Coils, Real Flavour

The P coils use a mesh heating element that spreads heat over a wider surface than old-style wire coils. That means faster, more even wicking, brighter flavour, and thicker vapour. Grab spares from our Geekvape P Coils range so you are never caught short.

Obelisk 60 Coil Options

The pack covers two resistances out of the box, and the wider P Series opens up more once you know the draw you like.

Start with the 0.4ohm P coil, rated around 50 to 60W. It is the pre-installed one and the best all-rounder: warm, full flavour and solid clouds. The 0.5ohm P coil, rated around 40 to 50W, is the gentler option, easier on your liquid and a slightly cooler vape. If you later want more power, the broader P range stretches down to lower resistances for bigger DTL hits.

• 0.4ohm P mesh: Warmer, cloudier all-rounder, 50 to 60W. Pre-installed.

• 0.5ohm P mesh: Cooler, easier on juice, 40 to 50W. Included spare.

• Wider P Series: Lower resistances available separately for more power.

How to Refill and Recoil the Obelisk 60 Pod

Two-minute job, start to finish.

1. Pull the pod off the device. The magnetic connection releases with a light tug.

2. Press-fit your coil. Push the 0.4ohm or 0.5ohm P coil firmly into the base until it clicks home.

3. Prime it. Drip three or four drops of e-liquid straight onto the coil's mesh windows.

4. Open the side stopper and fill the 2ml pod with 70/30 or higher VG liquid, then reseal firmly.

5. Let it rest upright for a solid five minutes so the mesh soaks through. Rushing this is the fastest way to a burnt coil.

6. Click the pod back on and start at the lower end of the coil's wattage, building up to taste.

What's in the Obelisk 60 Pod Pack

Each pack contains:

• One 2ml refillable pod

• The 0.4ohm P coil pre-installed

• A spare 0.5ohm P coil

• A metal coil tool is also included to help pry out old coils

There is no e-liquid in the pack, and no device, so add a bottle of high VG juice if you are running low.

For the Obelisk 60, and the Obelisk 60 Only

These pods are cut for the Geekvape Obelisk 60 pod kit and nothing else. They will not fit other Geekvape pod devices, and pods from other kits will not seat in the Obelisk 60. If you are unsure which Geekvape device you own, check the model before ordering, then browse matching gear in our Pod Kits range.

About Geekvape

Geekvape built the Obelisk line around its P Coil Series, a mesh coil platform designed for punchy sub-ohm flavour in a pocket-sized pod format. The Obelisk 60 paired that coil tech with a rugged AIO body, and the refillable pod is what makes it cheap to run long term.

Keep a couple of spare pods in a drawer and the device basically never stops. See the full range in our Geekvape Pod Kits collection.

Stock Up and Save

Coils and pods are consumables. They wear out, and running your Obelisk 60 on a tired coil just wastes juice. Keeping a spare pod ready means no dry hits and no downtime.

Order a couple at once for multi-buy savings, or set them on a repeat order through The Crow's Nest so they arrive before you run dry. Every order from Pirate Vapes is packed with care, age-verified at checkout, over-18s only, and fully TPD compliant.

Conclusion

The Obelisk 60 Replacement Pods are the straightforward way to keep a well-loved pod kit going: a 2ml refillable pod, two P mesh coils in the pack, and a stoppered side port that behaves itself in your pocket.

Sub-ohm and DTL, so match them with high VG liquid and start low on the wattage. Grab a few spares plus a fresh bottle from our Vape Accessories range, and stock up at Pirate Vapes.

FAQs

How many coils come with each Obelisk 60 pod?

Two. A 0.4ohm P coil pre-installed and a spare 0.5ohm P coil.

Will Obelisk 60 pods fit any other Geekvape device?

No. Obelisk 60 only. Other Geekvape pods will not seat correctly.

What e-liquid should I use in the Obelisk 60 pods?

High VG, 70/30 or above. The sub-ohm P coils are built for DTL, so nic salts and high-PG liquids are the wrong match here.

How much does the UK Obelisk 60 pod hold?

2ml, in line with UK TPD limits. Side-fill through the silicone stopper.

How long does an Obelisk 60 coil last?

Depends on juice and how hard you vape, but many users get roughly one to two weeks per coil. Sweeter, darker liquids gunk up mesh faster.

Can I use other P coils in Obelisk 60 pod?

Yes. The pod takes the wider Geekvape P Coil Series, so you can change resistance whenever you fancy a different draw.