Geekvape Wenax H1 Pod Kit

Geekvape Wenax H1 Pod Kit

Built to take a knock and stretch to around two days between charges. The Geekvape Wenax H1 pod kit pairs a shock-resistant aluminium body, featuring a rubberised base to absorb drops, with a 1000mAh battery and 7-19W across three power settings.

It fills from the side, fires on a draw or a button, and ships with two mesh pods: a 0.7ohm for a warmer, airier draw and a 1.4ohm for a tighter MTL pull. Each holds the UK 2ml limit, and charging is over USB-C. Pirate Vapes stocks it across the pod kits range.

Why vapers choose this kit:

• Two mesh pods come in the box: a 0.7ohm for a warmer, more vaporous draw and a 1.4ohm for a tight mouth-to-lung pull, so you can try both styles from day one without buying anything extra.

• A 1000mAh battery that Geekvape rates for around two days.

• Three power settings for a cooler or warmer vape.

• A shock-resistant aluminium body with a rubberised bottom cap built to shrug off daily drops.

• Draw or button firing, whichever you prefer.

Geekvape Wenax H1 Features

Two Pod Options for Different Draws

The kit hands you both styles. The 0.7ohm mesh pod runs warmer at 16-19W for more vapour and a looser draw, while the 1.4ohm sits at 8-10W for a tighter, cooler MTL hit. Same device, two experiences, and no need to decide before you have tried them.

1000mAh Battery With USB-C Charging

The 1000mAh cell is large for a pod this size, and Geekvape rates it for roughly two days of use between charges. When it does run down, USB-C brings it back quickly. There is an LED on the front to show you where the charge sits, so no guessing.

Durable Aluminium Body

This is where the Geekvape heritage shows. While it doesn't carry the waterproof rating of the Aegis line, the Wenax H1 is built tough for daily carry. The aluminium alloy chassis feels solid rather than hollow, and Geekvape has added a shock-absorbing silicone rubber base to the bottom of the device to protect the battery from the inevitable drops off a desk or out of a pocket. It is honestly the kind of kit you stop worrying about.

Button and Auto-Draw Activation

You can draw on it like a disposable, or use the button. The button does triple duty: five clicks to lock or unlock, three clicks to cycle the power, and a press to fire. It pairs well with Nic Salts at 10mg or 20mg on the 1.4ohm pod for a smooth MTL hit.

Easy Side-Fill Pod

Refilling is quick. Lift the silicone seal on the side of the pod, sit your bottle in, and fill to the line. The pod body is see-through so you can watch your level, and the leak-guard build keeps liquid where it belongs.

The 0.7ohm pod takes 50/50 freebase or nic salts nicely for more vapour, while the 1.4ohm is perfect for higher-strength salts. (Do not use thick high-VG liquids in either pod).

Geekvape Wenax H1 Colours

Eleven finishes on the same slim body, from understated to bright.

#buttons

• Black
• Blue
• Green
• Gunmetal
• Mint Blue
• Peach Pink
• Red
• Sky Marine
• Space Grey
• Voilet
• Yellow

Geekvape Wenax H1 Pod Options

The kit includes both resistances, and once you know your preference, replacements come in 3-packs.

The 0.7ohm mesh pod runs at 16-19W. It gives a warmer, slightly looser draw with more vapour and a bigger flavour hit, and it suits 50/50 freebase liquid or lower-strength nic salts perfectly.

The 1.4ohm mesh pod runs at 8-10W for a tighter, cooler mouth-to-lung draw closer to a cigarette pull. It is the natural home for nic salts.

#buttons

• 0.7 Ohm
• 1.4 Ohm

How to Set Up the Wenax H1

A quick fill, then a short soak.

1. Charge the device over USB-C first. Note the cable is not in the box, so you will need your own from our Chargers And Cables range.

2. Lift the silicone seal on the side of your chosen pod and fill to the 2ml line, then close it firmly.

3. Stand the pod upright for around five minutes so the mesh coil wicks fully.

4. Dab any excess liquid from the contacts, then click the pod onto the magnetic base.

5. Pick a power setting with three clicks of the button, or just draw on it.

6. Start gentle and build up once the flavour is flowing.

What's in the Geekvape Wenax H1 Pod Kit Box

• One Geekvape Wenax H1 device,

• one 0.7ohm mesh pod,

• one 1.4ohm mesh pod

• and a user manual.

There is no USB-C cable and no e-liquid included, so add a bottle of your chosen liquid and a charging cable if you do not have one to hand.

Pods for the Wenax H1

The H1 uses its own 0.7ohm and 1.4ohm mesh cartridges, sold in packs of three, and these are the only pods it takes. Other Wenax and Geekvape pods are shaped differently and will not fit, so stick to the H1 cartridge when you restock.

You will find them among our Replacement Pods, and the wider Geekvapevape Range has matching kits and spares.

About Geekvape

The Wenax line is Geekvape's family of simple, refillable MTL pods, and the H1 is one of its more capable entries. It carries over the durability Geekvape is known for, with an IP67-rated shell built to survive daily life, and adds a bigger battery and three adjustable power levels that most pods in this class skip.

It is a practical, hard-wearing bit of kit aimed at vapers who want something dependable they can carry everywhere and not baby.

Stock Up and Save

The two-day battery and rugged shell make the H1 an easy grab-and-go daily, and because both pods come in the box, the only thing worth keeping spare is a 3-pack of your preferred resistance.

Pirate Vapes ships every order the same day when it is placed before 4 pm. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

The Wenax H1 is a lot of pod kit for the money: a tough IP67 body, a two-day battery, three power settings and two mesh pods to cover both draw styles.

Fill it with a nic salt or a 50/50 bottle, and it will keep up with a full day and then some. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

What pods does the Wenax H1 take?

Its own 0.7ohm and 1.4ohm mesh cartridges, sold in 3-packs. No other Geekvape pod fits.

Does the Wenax H1 come with a charging cable?

No. The H1 charges over USB-C, but the cable is sold separately, so you will need your own.

What is the difference between the Wenax H1's two pods?

The 0.7ohm gives a warmer, airier draw with more vapour. The 1.4ohm is a tighter, cooler MTL draw. Both come in the box.

Can I use nic salts in the Wenax H1?

Yes, both pods handle nic salts perfectly. The 1.4ohm pod is ideal for salts at 10mg or 20mg. The 0.7ohm suits lower-strength nic salts or 50/50 freebase. Avoid thick high-VG liquids in both pods.

How do I change the power in Wenax H1?

Click the button three times to cycle between Low, Medium and High. You can also fire by drawing on it.

How long does the Wenax H1 battery last?

Geekvape rates the 1000mAh battery for around two days of use, though heavy vaping will shorten that.