Innokin Coolfire Z60 Mod

Innokin Coolfire Z60 Mod

A compact 60W box mod with a 2500mAh built-in battery, USB-C fast charging, and full 510-threaded compatibility. The Innokin Coolfire Z60 is a variable wattage device built around Innokin's Z-coil ecosystem and its signature features: Coil+, Refresh mode, and a physical battery master switch.

Zinc alloy chassis, a 0.96" OLED display, resistance from 0.2Ω to 3.5Ω, and a range covering tight MTL through to warmer RDTL vaping. This listing is for the mod only. Pair it with any 510 tank from the Vape Mods range.

Why vapers choose this:

• Genuine 60W ceiling in a pocketable body. Zinc alloy build, small footprint, but enough headroom for warmer RDTL clouds when you want them.

• Coil+ pulses your coil after every draw, clearing residue and drawing fresh liquid back into the wick. Coils genuinely last longer.

• Physical battery master switch. Kill power completely for travel or storage. No accidental firing in your bag.

• USB-C fast charging at 1.7A. Full charge in around 90 minutes.

• 510 threaded and Z-coil ready. Pair it with the Zlide Top tank or any 510 atomiser you already own.

Innokin Coolfire Z60 Mod Features

Small Chassis, Real Power

Zinc alloy construction in a slim, pocketable footprint, and yet it puts out a genuine 60W across the full 0.2Ω to 3.5Ω range. Most mods this size cap at 40W. The Z60 does not. That extra headroom matters for sub-ohm mesh RDTL setups.

Coil+ Actually Does Something

Coil+ is not marketing filler. After every draw, the device pulses a small burst of power through the coil, burning off residue and pulling fresh liquid back through the wick. Less gunk, cleaner flavour toward the end of a coil's life, more longevity per replacement.

Refresh Mode for Sluggish Coils

If a coil starts tasting muted (usually from residue, sometimes from an incomplete prime), Refresh mode manually heats it at 40% of your set wattage. Just enough to clear buildup and re-saturate the cotton without burning anything. Worth trying before you assume a coil is dead.

Battery Master Switch

A proper physical cutoff located on the base of the mod. Flip it off, and the device is genuinely dormant. Ideal for Regulated Mods users who travel, or anyone who has ever pulled a fired mod out of a coat pocket. Peace of mind, no menu diving.

510 Threading and Full Z-Coil Compatibility

The Coolfire Z60 uses standard 510 threading, so it accepts any 510 tank up to around 25mm in diameter. Pair it with Innokin's Zlide Top tank for the intended MTL to RDTL range, or fit any MTL Tanks or DTL Tanks you already run. The Z-coil platform is one of the widest in vaping, covering everything from tight 1.6Ω MTL up to 0.3Ω sub-ohm mesh.

Innokin Coolfire Z60 Mod Colours

Seven colours on the shelf. Same zinc alloy body, different finish. Internals, warranty, and coil compatibility are identical across every option.

#buttons

• Black
• Blue
• GunMetal
• Pink
• Purple
• Red
• Silver

How to Set Up the Innokin Coolfire Z60 Mod

First-time setup takes about five minutes.

1. Charge the device first. Plug in via USB-C. The 0.96" OLED screen tracks charging progress.

2. Flip the battery master switch to on. It is located on the bottom of the device. Nothing works until it is engaged.

3. Attach your 510 tank. Screw in clockwise, finger-tight only. Overtightening damages the 510 pin.

4. Fill the tank and leave it standing upright for a full seven minutes. The Z-coil cotton needs time to soak through. Skip this and the coil burns on the first draw permanently.

5. Set your wattage using the arrows. Start near the lower end of your coil's range. The OLED shows wattage, resistance, voltage, and battery.

6. Press the fire button 3 times to turn the device on or off. Press and hold the + and - buttons together to open the menu and choose between VW, Coil+, and Refresh.

What's in the Innokin Coolfire Z60 Mod Box

Mod only. The box contains the Innokin Coolfire Z60 device and a Type-C USB cable. No tank, no coils, no e-liquid. Pair with any 510 tank, or pick up the Innokin Zlide Top separately for the intended combination. A wall plug is not included, so use one you own or grab one from Chargers And Cables.

Made for 510 Tanks and the Full Innokin Z-Coil Range

A standard 510-threaded mod, so it accepts almost any modern tank up to 25mm at the base without overhang. Innokin's Zlide Top is the intended pairing and delivers the full MTL to RDTL range. Any other 510 tank fires correctly, provided the resistance sits inside the 0.2Ω to 3.5Ω window.

What does not fit: proprietary pod systems, disposables, and non-510 threaded tanks. Browse the full Innokin Vapes range for compatible tanks and Z-coils.

About Innokin

The Coolfire series is one of Innokin's longest-running mod platforms. Every iteration has focused on the same things: solid battery life, real power in a small chassis, and hardware features (Coil+, Refresh, master switch) that competitors still have not properly copied.

The Z60 sits in the middle of the current lineup, between the Z50 and the Z80. Innokin has been designing regulated mods since 2011 and holds patents on several coil and airflow technologies now standard across the industry.

Stock Up and Save

The Z60 pairs with a huge range of tanks and coils, so grab spare Z-coils and a backup USB-C cable at the same time. Pirate Vapes ships every order same-day before 4 pm in padded packaging, so the mod arrives cosmetically intact.

All Innokin hardware here is TPD compliant, with an age-verified checkout and over-18s-only policy. Spend over £25 for Free Pirate Post. Browse spare parts in Vape Accessories.

Conclusion

The Innokin Coolfire Z60 Mod is one of the better-value 60W single-battery mods on the UK market. Genuine 60W output, a proper battery master switch, USB-C fast charging, and Coil+ and Refresh modes that actually extend coil life.

Full 510 compatibility means it works as a first regulated mod, a pocket backup, or a daily driver. Grab yours at Pirate Vapes.

FAQs

Does the Coolfire Z60 come with a tank?

No. This listing is for the mod only. Box contents are the Z60 device and a Type-C USB cable. Pair it with any 510 tank you already own, or buy the Zlide Top tank separately.

What tanks are compatible with the Coolfire Z60?

Any 510-threaded tank up to around 25mm at the base. The Innokin Zlide Top is the intended pairing, but the mod fires any 510 atomiser within the 0.2Ω to 3.5Ω resistance range.

How long does the Coolfire Z60 battery last?

The 2500mAh built-in battery covers a full day for most vapers at MTL wattages. Heavier RDTL use at 40W and above will drain it faster. USB-C at 1.7A tops it up in around 90 minutes.

How do I change modes on the Coolfire Z60?

Press and hold the + and - adjustment buttons together to access the mode menu, then use the fire button to select Variable Wattage, Coil+, or Refresh.

Can I use the Coolfire Z60 for sub-ohm vaping?

Yes. The 60W maximum and 0.2Ω minimum resistance handle warmer RDTL and light sub-ohm setups comfortably. Not built for high-wattage cloud chasing above 60W.

Does the Coolfire Z60 have a battery you can replace?

No. The 2500mAh cell is built in and charged via USB-C. When the battery eventually degrades after several hundred cycles, the whole device is replaced rather than the cell.