Innokin Endura T22E Vape Kit

Innokin Endura T22E Vape Kit

The Innokin Endura T22E is a proper beginner MTL kit built around a 2000mAh battery, a fixed 14W output, and a 2ml twist-top-fill tank running 1.5ohm coils with Japanese organic cotton wicking. One button, no menus, no wattage to second-guess.

It suits ex-smokers after a tight, cigarette-style draw and anyone who wants a reliable refillable device without the faff of a full mod. Sits comfortably among our MTL Vape Kits and works as a genuine step up from throwaway bars.

Why vapers choose this:

• The fixed 14W output matched to a 1.5ohm coil takes all the guesswork out of it, so there are no menus, no wattage curves, and no burnt hits from running the wrong power. You fill it, press the button, and get a consistent MTL draw every time.

• 2000mAh sees most people through a full day on a single charge.

• Threaded top-fill tank. Unscrew the top cap, fill your juice down the inside wall, and screw it back on. Simple and minimal mess.

• Vape while it charges. The pass-through feature keeps you going during a top-up.

• Japanese organic cotton wicking in the coils, which lifts flavour noticeably over cheaper cotton and keeps the draw clean.

Innokin Endura T22E Features

Simple One-Button Operation

No wattage dial. No mode menus. The Endura T22E runs on single-button operation, and the traffic-light LED tells you battery and charge status at a glance. Three clicks lock or unlock the fire button so it will not misfire in a pocket. For a first device, that simplicity is the point, and it is why the Endura line has stuck around so long.

1.5Ω MTL Coil

The 1.5ohm coil and Prism airflow are tuned for mouth-to-lung vaping, the tight, cigarette-style pull most ex-smokers are chasing. Pair it with a 20mg Nic Salt or a 50/50 freebase, and you get a satisfying throat hit without clouds billowing everywhere. Worth trying if you are moving off disposables.

2ml Top-Fill Tank

The 2ml tank uses a threaded top-fill: unscrew the top cap to access the tank, add your e-liquid down the inside wall, and screw it back on securely. The stainless steel and Pyrex glass build feels sturdier than the price suggests. When it is time to change the push-fit coil, just make sure the tank is completely empty first to avoid any spills. Refills take seconds.

2000mAh Battery and Charging

Run low mid-session? The Micro USB pass-through lets you charge and keep vaping, so you are never fully out of action while it tops up. The 2000mAh cell recharges from empty in a reasonable window, and the integrated PCB handles charging and short-circuit protection for you.

Strong and Durable Build

This is a device meant to live in a pocket or bag. The chassis is compact and solid, the tank glass is reinforced Pyrex, and the whole thing is designed around dependable everyday use rather than flash. Spare coils and O-rings are cheap and easy to find in our Vape Coils range, so upkeep costs stay low.

Innokin Endura T22E Colours

The Endura T22E comes in a spread of finishes, from understated to bright. Stocked colours vary, so check the picker on the product page for current availability.

#buttons

• Black
• Blue
• Pink
• Purple
• Rainbow
• Red
• Silver

How to Set Up the Innokin Endura T22E

Quick job. A few minutes from box to first puff.

1. Charge the battery fully via the Micro USB port before first use.

2. Prime the coil by dripping a few drops of e-liquid directly onto the exposed cotton ports on the sides of the coil.

3. Push the coil firmly into the tank and screw the bottom base cap back on.

4. Unscrew the top cap of the tank, fill with 50/50 or nic salt e-liquid down the inside wall (avoiding the centre hole), then screw the cap securely back on.

5. Let it stand upright for a good ten minutes so the cotton soaks through fully. Rush this and your first coil will taste scorched.

6. Click the button exactly three times to switch the device on, then press the button while inhaling for a mouth-to-lung draw.

What's in the Innokin Endura T22E Box

You get:

• The Endura T22E battery,

• The 2ml Prism T18E tank,

• Two 1.5ohm Prism T18E coils,

• A Micro USB charging cable,

• A pack of spare O-ring seals

• And a user manual.

No e-liquid is included, and there is no mains plug supplied with the cable. Grab a bottle of juice, and you are ready to go.

A Reliable MTL Kit From the Endura Line

The Endura T22E is the box-style evolution of Innokin's long-running Endura series, and it takes Prism T18E coils, so replacements are easy to source. It is a self-contained kit rather than a pod system, so it is not cross-compatible with pods from other brands.

If you want to explore alternatives or stock spares, browse our wider Vape Kits range and confirm the coil resistance before buying.

About Innokin

Innokin has been building MTL hardware since the early days of vaping, and the Endura series is where a lot of ex-smokers started.

The brand's focus has always been dependable, fuss-free devices rather than chasing big clouds or gimmicks, which is exactly why the Endura T22E works so well as a first kit. 

Fixed wattage, organic cotton coils and simple one-button use are all classic Innokin. You will find more of their gear across our Reusable Vapes selection.

Stock Up and Save

A pack of spare coils and a couple of bottles of juice will keep this kit running for weeks, so it is worth stocking up in one go.

Pirate Vapes dispatches every order placed before 4 pm the same day, and you get Free Pirate Post on orders over £40. All stock is TPD compliant, the checkout is age-verified, and we sell to over-18s only.

Conclusion

The Innokin Endura T22E is one of the easiest kits to recommend to a first-time vaper or anyone stepping off disposables. Fixed 14W output, a tight MTL draw, a simple twist-fill tank and genuine all-day battery make it about as fuss-free as refillable vaping gets.

It will not out-cloud a sub-ohm mod, and it is not meant to; this is a device built for flavour and simplicity. 

Pair it with Nic Salts and some spare coils, browse our Vape Accessories for cables and cases, and order from Pirate Vapes for genuine UK stock.

FAQs

Is the Endura T22E good for beginners?

Yes, it is one of the most beginner-friendly kits going. Fixed 14W output and single-button operation mean there is nothing to set up beyond filling the tank.

Is the Endura T22E MTL or DTL?

MTL. The 1.5ohm coil and airflow are tuned for a tight, cigarette-style mouth-to-lung draw, not big direct-lung clouds.

What e-liquid should I use in the Endura T22E?

A 50/50 freebase or a nic salt works best. For the tight MTL draw, a 20mg nic salt is a sensible starting strength for heavier ex-smokers.

What coils does the Endura T22E take?

It uses 1.5ohm Prism T18E coils. Two are included in the box, and replacements are widely available.

How long does the Endura T22E’s battery last?

The 2000mAh battery comfortably covers a day of moderate use, and the pass-through feature lets you vape while it charges if you run low.

Does the Endura T22E leak?

The threaded top-fill seals cleanly, and the push-fit coil system keeps coil changes tidy—just ensure the tank is completely empty before you pull the old coil out. Store the device upright when full.