Innokin iSub Replacement Coils

Innokin iSub Replacement Coils

Five replacement coils for Innokin's long-running iSub tank family, built with 100% organic Japanese cotton wicking and a built-in 510 pin connector. The iSub coils use a no-spill coil swap system, so you are not draining the tank every time you change one out.

 Five resistance options in the pack listing, from 0.1 ohm temperature control right through to 2.0 ohm for gentle MTL sipping. Whether your tank runs sub-ohm clouds or a tight mouth-to-lung draw, there is a resistance here that fits. Pack of five, compatible across the wider Vape Coils range for iSub tanks.

Why vapers choose the iSub coils:

• Five resistance options in one product line cover everything from restricted MTL through to proper sub-ohm cloud production, all under one coil family

• No-spill swap system means you are not tipping juice everywhere every time a coil needs changing

• Organic cotton wicking delivers cleaner flavour than the synthetic wicks found in cheaper own-brand coils

• Built-in 510 connector keeps the coil seated properly and avoids the loose-connection issues some tanks develop over time

• Pack of five covers heavy iSub users for weeks without a reorder

Innokin iSub Coils Features

Five Resistances, One Coil Family

Most coil packs give you one resistance and call it a day. The iSub range spreads across 0.2ohm, 0.5ohm, 2.0ohm, 0.5ohm SS BVC, and 0.1ohm TC. That range covers proper sub-ohm DTL at the low end and gentle, cigarette-style MTL at the top end. Pick based on how your tank is set up and what kind of draw you actually want, not what happened to be in stock.

The No-Spill Swap That Actually Works

Older bottom-coil tanks had a habit of dumping half your e-liquid across the desk the moment you unscrewed the base. Innokin's swap system on the iSub range seals the tank chamber during the change, so you pull the old coil, drop in the new one, and get back to vaping without cleaning up a mess first. Small design detail, big practical difference.

Cotton That Does Not Fight the Flavour

The wicking here is 100% organic cotton, no synthetic blends cutting corners. Cotton wicks liquid evenly and does not carry the faint chemical taste that lower-grade wicking sometimes leaves on the first few draws. Worth pairing with a 50/50 or higher-PG blend on the higher-resistance coils, and thicker high-VG juice on the sub-ohm end.

TC for the Mod Owners Who Want It

The 0.1ohm coil is built specifically for temperature control. If your mod supports TC mode and you have been meaning to try it, this is the coil that unlocks it on an iSub tank. Consistent vapour, no ramp-up spike, and better control over exactly how hot the coil runs. Not something every vaper needs, but genuinely useful if your device supports it.

Built-In Connector, Fewer Loose Contacts

The 510 pin connector is moulded into the coil base rather than being a separate part that can work loose. Fewer points of failure means fewer misfires and dry-hit warnings caused by a poor connection rather than the coil itself.

Innokin iSub Coils Resistance Options

Five options across a genuinely wide range. The choice comes down to how you vape and what tank setup you are running.

#buttons

• 0.1ohm TC
• 0.2ohm
• 0.5ohm
• 0.5ohm SS BVC
• 2.0ohm

How to Set Up the Innokin iSub Coils

Straightforward bottom-coil swap. A couple of minutes.

1. Drain any remaining e-liquid from the tank if you are switching resistances, since a big wattage jump on old juice can taste off.

2. Unscrew the base of the iSub tank to expose the coil chamber.

3. Pull the old coil straight out of the chamber.

4. Align the flat sides of the fresh coil with the slots and push it firmly into place.

5. Reassemble the tank, fill with e-liquid, and let the coil sit for six to eight minutes before firing, giving the cotton time to fully saturate.

6. Start at the low end of the coil's wattage range and work upward until the flavour sits where you want it.

What's in the Innokin iSub Coils Box

Five coils in your selected resistance. No tank, no e-liquid, no mod. Just the coils, ready to drop into an existing iSub setup.

Built for the Innokin iSub Tank Family

These coils are designed specifically for Innokin's iSub tank range. If you already own an iSub-series tank, the built-in 510 connector and coil chamber will match without modification.

What they do not fit: Innokin's newer Zenith, Zlide, or T18 tank lines, or any third-party tank using a different coil thread. Each of those platforms runs its own dedicated coil, and the iSub head will not seat properly outside its own family. Browse Innokin Coils for the right match if you are running a different Innokin tank.

About Innokin

Innokin has been building vape hardware since the early 2010s, and the iSub tank family has run through several generations as one of the brand's longest-standing product lines. Rather than chasing short-lived trends, Innokin kept iterating on the iSub coil platform, expanding the resistance range to serve MTL, DTL, and TC vapers from the same tank body.

That range is exactly why the coil pack still sells well years after the tank first launched: one tank, five different vaping styles, no need to switch hardware.

Stock Up and Save

Coils do not last forever, and a five-pack across a range this wide means you can experiment with resistances without committing to a full new order each time.

Every bottle and coil pack from Pirate Vapes ships same-day before 4 pm, with full tracking included. Age-verified checkout, over-18s only, TPD-compliant stock throughout. Spend over £40 and Free Pirate Post covers delivery.

Conclusion

The Innokin iSub coils give you five distinct vaping styles from a single, well-established tank platform. Sub-ohm cloud production, balanced all-day vaping, gentle MTL, and even temperature control, all covered by one coil family with organic cotton wicking and a no-spill swap system that actually saves you the mess.

If you already run an iSub tank, this pack keeps it going without surprises. Browse more Innokin Coils and Vape Accessories, or head back to the full range at Pirate Vapes.

FAQs

Which tanks do the iSub coils fit?

Innokin's iSub tank series specifically. They will not fit Zenith, Zlide, T18, or other Innokin tank platforms.

What is the difference between the 0.5ohm and 0.5ohm SS BVC?

The standard 0.5ohm is a horizontal Kanthal build rated for 20-35W. The 0.5ohm SS BVC uses a vertical stainless steel build rated higher at 30-60W, and it can also run in temperature control mode.

Can I use the 0.1ohm coil in wattage mode?

No. The 0.1ohm is built for temperature control and needs a TC-capable mod set to the correct wire type. Using it in standard wattage mode is not recommended.

How long does an iSub coil last?

Most vapers get one to two weeks depending on resistance and usage. Sub-ohm coils at higher wattage tend to wear faster than the MTL-range options.

What e-liquid suits the sub-ohm resistances?

High-VG juice from 70/30 upward works best on the 0.2ohm. The higher-resistance options handle 50/50 blends comfortably.