Innokin Jem Replacement Vape Coils

Two coils, two materials, one job: a tight, quiet MTL draw at low power. The 1.60 Ohm is a traditional Kanthal wire coil with organic cotton. Warm, familiar, good on flavour. The 2.0 ohm Ceramic swaps the wire for a ceramic element that heats more slowly and evenly, with slightly cleaner taste and longer life.

Both screw into the Jem Pen and fire at just 10 to 13.5W, so battery life stretches, and vapour stays discreet. Sold in packs of 5. MHRA-notified. Pirate Vapes ships them age-verified across the UK.

Why vapers choose this:

• Two coil types, Kanthal for warmth and ceramic for longevity and purity.

• Extremely low wattage (10 to 13.5W), which means long battery life and quiet vapour.

• A tight MTL draw that sits closer to a cigarette than most coils on the market.

• Screw-in fitting, simple enough for anyone to change in under a minute.

• MHRA-notified, genuine Innokin coils sold through age-verified checkout.

Innokin Jem Replacement Vape Coils Features

Kanthal or Ceramic, and Why It Matters

The 1.60 Ohm Kanthal uses a traditional resistance wire wrapped around organic cotton. It warms up quickly, delivers a familiar MTL hit, and produces a touch more vapour than the ceramic. The 2.0 ohm Ceramic replaces the wire with a porous ceramic element that heats more gradually and evenly. The draw is cooler, the flavour stays cleaner for longer, and the coil tends to outlast the Kanthal by a few days. Two paths to the same destination.

Built for Tight MTL at Very Low Power

Both coils fire below 14W. That is low enough that the Jem Pen's battery lasts most of the day, the vapour stays discreet, and the throat hit on a nic salt is smooth rather than harsh. If you came to the Jem from a cigarette and liked how close it felt, these coils are the reason.

Stainless Steel Barrel, Multiple Ports

The coil housing is stainless steel, which resists corrosion and holds a clean thread over repeated changes. Multiple wicking ports run around the barrel, keeping the cotton fed with e-liquid from every angle. That even wicking reduces dry spots and helps the coil last its full life before the flavour starts to drop.

Screw-In, No Guesswork

The coil threads into the tank base. Unscrew the old one, screw the new one in. There is no press-fit ambiguity, no wondering whether it seated properly. If it turns and tightens, it is in. Simple enough for a first-time vaper to handle without instructions.

Discreet Vapour, Clear Flavour

The combination of high resistance and low wattage means the Jem produces a modest, cigarette-like amount of vapour. That makes it ideal for people who do not want to draw attention when vaping in public. The flavour, though, is surprisingly clear for such a small output, especially on the ceramic coil.

Innokin Jem Replacement Vape Coils Resistance Options

No flavour to choose. These are empty coils; you fill the tank with your own juice. Two options.

• 1.60 Ohm - Kanthal wire, organic cotton, 10 to 13.5W, warmer draw, slightly more vapour

• 2.0 ohm Ceramic - ceramic element, organic cotton, 10 to 13W, cooler draw, longer coil life

Both suit high-PG or 50-50 E-Liquid and Nic Salts. Avoid thick high-VG juice in these coils; the wicking ports are small and designed for thinner liquids. Browse our E-Liquids collection for the right pairing.

How to Set Up the Innokin Jem Replacement Vape Coils

1. Unscrew the tank base and remove the old coil by turning it anticlockwise.

2. Screw the new coil in clockwise until finger-tight. Do not overtighten.

3. Squeeze a couple of drops of juice into the cotton slots on the barrel to pre-wet the wick.

4. Reassemble the tank, fill with e-liquid, and let it stand for two to three minutes.

5. Vape. Start at around 10W and adjust up to taste.

What's in the Innokin Jem Replacement Vape Coils Box

Five coils in whichever type you choose, Kanthal or Ceramic. No tank, no device, no e-liquid. Grab a bottle of Nic Salts or 50-50 E-Liquid to fill your tank.

Made for the Innokin Jem Pen and Goby

The Innokin Jem coils are designed specifically for the Jem starter kit range. They are compatible with the Innokin Jem Pen, Jem AIO, and Goby devices.

They are not compatible with the Zenith or Zlide tanks, which use the separate Z-Coil platform. If you own a Zenith or Zlide, check the Innokin Zenith Plexus-Z Replacement Coils instead. You will find the Jem coils and the kits in our Innokin Vapes collection, with spares in Vape Coils.

About Innokin

The Jem Pen is Innokin at its most stripped-back. No screen, no wattage controls, no settings. Just a battery, a tank and a coil. It was built for smokers making the switch who did not want a learning curve, and the coils reflect that: screw in, fill, vape.

The ceramic option adds a touch of refinement for people who want cleaner flavour without upgrading to a more complex kit. For a brand known for engineering, the Jem is proof that Innokin can do simple just as well.

Stock Up and Save

Five coils for a fiver or so. That is one of the cheapest running costs in vaping, and at 10 to 13W per puff, your e-liquid stretches further too. Worth trying both types if you have not already: the ceramic lasts longer and the Kanthal warms up faster, so having a pack of each lets you switch to suit your mood. Genuine Innokin, MHRA-notified, dispatched tracked, age-verified checkout.

Conclusion

Two coils. One screw-in fit. A tight MTL draw at barely any wattage. The Jem coils are not complicated, and that is entirely the point. The Kanthal gives a warm, familiar hit. The ceramic runs cooler and lasts longer. Both keep vapour discreet and flavour clear.

If you run a Jem Pen, Jem AIO or Goby, these are the only coils that fit. Grab a 5-pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Kanthal or Ceramic, which is better?

Neither is objectively better. The Kanthal warms up faster and gives a slightly fuller hit. The ceramic runs cooler, tastes a bit cleaner, and tends to last a few days longer. Try both and see which suits you.

Will these fit my Zenith or Zlide tank?

No. The Jem coils are specific to the Jem and Goby kits. Zenith and Zlide tanks use the separate Z-Coil range.

What juice should I use?

High-PG or 50/50 e-liquid. Nic Salts at 10mg or 20mg work well. Avoid thick high-VG juice, the small wicking ports cannot handle it and you will get dry hits.

How long does a coil last?

About a week of regular use on the Kanthal. The ceramic can stretch a bit longer. Sweet or dark juices shorten the life as always.

Are these MHRA-notified?

Yes. The 1.6Ω carries GBID 00128-17-00113. Genuine Innokin coils sold through age-verified checkout.