Innokin Prism T18 II Tank

Innokin Prism T18 II Tank

A proper mouth-to-lung tank for a classic pen setup. The Innokin Prism T18 II is the replacement tank built for the Endura T18 II and T18 E kits, running a 1.5ohm coil for a warm, tight MTL draw that reads a lot like a cigarette. It holds 2ml, fills from the top, and sits its Pyrex glass inside a stainless steel cage so it takes knocks without cracking.

A magnetic cap keeps the mouthpiece free of pocket lint between vapes. Easy to fill, easy to refill, and built for the steady all-day vaping most ex-smokers are after. One of the sturdier MTL Tanks on the shelf.

Why vapers choose this:

• It is the exact tank the T18 II shipped with, so if yours cracked or wore out, this drops straight back onto the battery and works like day one.

• The 1.5ohm coil runs a warm, tight MTL draw, which is the closest most tanks get to the feel of a cigarette.

• Stainless steel cage around the glass. It survives being dropped in a bag.

• Top-fill and a tool-free coil swap make upkeep quick.

• Three airflow settings in one ring, so one tank suits a tight or a slightly airier vaper.

Innokin Prism T18 II Features

The Coil Does the Heavy Lifting

This tank runs on Innokin's Prism T18E coils, with a 1.5ohm head supplied. Inside sits Japanese organic cotton, which wicks cleanly and keeps the flavour honest on a low-power device. When a coil tires out, a fresh one screws in from the base in seconds. Stock a few spare Replacement Coils and the tank keeps going for a long time.

Airflow You Can Actually Feel

The base ring has four holes. Swivel it to a single hole for a tight, cigarette-style pull, open it to all four for a softer draw, or sit somewhere in between. It is a small control that makes a real difference, and it is the reason one T18 II suits vapers who like very different draws.

Built to Be Dropped

The Pyrex tube is wrapped in a stainless steel cage rather than left exposed. That is the whole design brief here: a tank that handles the knocks and scrapes of a pocket or a bag without shattering. Lightweight, but not flimsy.

A Cap That Earns Its Keep

The magnetic mouthpiece cap is a small touch that matters. It keeps dust and lint off the drip tip when the tank is in your pocket, and it clicks onto the base of the T18 II battery while you vape so you do not lose it. Fair enough for something so easy to misplace.

Top-Fill, No Mess

Refilling means twisting off the top cap and pouring your liquid down the side, keeping clear of the central chimney. No unscrewing the base, no tipping the tank upside down. Under a minute and you are back to vaping.

Innokin Prism T18 II Colours

Three finishes to pick from in the tank picker.

#buttons

• Black
• Rainbow
• Silver

How to Set Up the Innokin Prism T18 II

A couple of minutes, no tools needed.

1. Unscrew the base from the tank and, if you are replacing a coil, grip the old 1.5ohm head and pull it free.

2. Wet the new coil by putting three or four drops of e-liquid onto each of the cotton wicking ports you can see on the side.

3. Screw the fresh coil into the base and reassemble the tank until finger-tight.

4. Top-fill it. Twist off the top cap and run your 50/50 liquid down the inside wall, keeping clear of the central tube, then close the cap.

5. Let it settle. Stand the tank upright and leave it for a good eight to ten minutes so the cotton saturates fully before the first draw.

6. Fit it to your device and start with gentle, low-power pulls to bed the coil in.

What's in the Innokin Prism T18 II Box

The tank arrives with everything to run it and keep it going:

• the top-fill tank itself,

• two 1.5ohm coils with one already installed,

• the magnetic cap,

• a spare drip tip,

• and a spare o-ring set.

No e-liquid and no battery in the box, so you will need your own liquid and a 510 device to pair it with.

Made for the Endura T18 Family and Any 510 Battery

The Prism tank was designed alongside the Endura T18 II, and it fits that battery, the T18 II Mini, and the older T18 E kits without any fuss. It also screws onto any standard 510 device with its own airflow, though be aware the draw can feel restricted on a plain battery that has none.

What it is not is a sub-ohm cloud tank. This is a 1.5ohm MTL platform through and through, best matched to a low-power pen. If you are picking a device to pair it with, the MTL Pen Kits are the natural home for it. Use the Prism T18E coils only, since other Innokin coil families will not thread in.

About Innokin

Innokin is one of the names that helped build MTL vaping in the UK. The Endura T18 sold in the millions as a simple, reliable pen for people leaving cigarettes behind, and the T18 II refined the formula rather than reinventing it.

The Prism tank is the part that made the second generation tick: a small, tough, top-fill tank with a coil tuned for a tight, warm draw. It is not flashy hardware, and that is the point. It does one job, does it for years, and is cheap to keep running.

Stock Up and Save

A tank lasts as long as you feed it fresh coils, so grabbing a few Prism T18E heads alongside this keeps you off a burnt hit for months.

Pirate Vapes ships every order the same day before 4 pm, with an age-verified checkout and over-18s only. Free Pirate Post lands on orders over £40.

Conclusion

The Prism T18 II is a no-drama MTL tank: a 2ml top-fill built for the Endura T18 line, tough enough to live in a pocket, and simple enough that a first-week vaper can recoil it blind. If your old one gave out or you just want a spare, this is the direct fit.

Browse the rest of the Innokin Range and matching Vape Accessories, or head back to Pirate Vapes to sort the coils and liquid to go with it.

FAQs

Which kits does the T18 II tank fit?

The Endura T18 II, the T18 II Mini, and the older T18 E. It also fits any 510 device with its own airflow, though the draw may feel tight on a plain battery.

What coils does the T18 II tank take?

Innokin Prism T18E coils. A 1.5ohm ships with it, and 1.7ohm and 2.0ohm options exist. Other Innokin coils will not fit.

What e-liquid works best in the T18 II tank?

A 50/50 ratio or higher-PG juice. It is a low-power MTL tank, so thick high-VG liquid will not wick properly.

Is the T18 II tank top-fill?

Yes. Twist off the top cap and fill down the side.

Can I use nic salts in the T18 II tank?

Yes. The tight 1.5ohm MTL draw suits 10mg and 20mg salts nicely.

Does the T18 II tank come with coils?

Two. One is pre-installed, and one is spare, both 1.5ohm.