Innokin Endura T18E Replacement Vape Coils

Your Endura has started tasting a bit off. Maybe the vapour is thinner than it was last week, or there is a faint burnt edge you cannot quite ignore. That is the coil. They wear out. These are the 1.5Ω replacements for the Prism T18E tank, five in a pack, Japanese organic cotton inside, and they fit straight into the T18E, T18II, T18X, and T22 Pro kits.

Also works with the standalone T18E Pro and T22E tanks. Mouth-to-lung, nic salts and 50/50 liquids, tracked UK delivery from Pirate Vapes with age verification at checkout.

Why vapers choose this:

• Genuine Innokin, not a clone that leaks after two fills.

• Japanese organic cotton that does not leave a weird papery taste on the first few draws.

• 24 juice ports. More holes, more even wicking, fewer dry hits when you chain-vape.

• Five in a box, each one sealed in its own wrapper. A month or two sorted.

• No-spill swap. You do not have to empty the tank to change the coil.

Innokin Endura T18E Replacement Vape Coils Features

Cotton Quality Actually Matters Here

Not all cotton is the same. Cheap coils use cotton that tastes papery or breaks down after a few days and starts muting everything. Innokin uses Japanese organic cotton in these, and you can tell. Flavours come through cleaner, especially simple ones like a plain tobacco salt or a single fruit where there is nothing to cover up a rough wick. It holds up longer, too. That is not marketing waffle, it is the main reason people stick with genuine Innokin coils rather than saving a quid on a knock-off.

Changing the Coil Without the Mess

On a lot of tanks, changing the coil means unscrewing the top, pouring out whatever e-liquid is left, swapping the coil, refilling, and cleaning up the puddle on your desk. The Prism T18E does not work like that. You unscrew the base, swap the coil from underneath, and screw it back on. The juice stays in the tank. Sounds minor. But after you have done it a dozen times, you will not want to go back to a tank that makes you drain it every time.

24 Juice Ports

There are 24 small holes drilled around this coil. Each one feeds e-liquid into the cotton. More ports mean the wick stays wet more evenly, and you are much less likely to get that horrible dry hit when you take a few draws in a row. Most coils have far fewer. It is a genuine engineering difference and not just a number on a spec sheet.

A Tight, Cigarette-Style MTL Draw

1.5Ω, mouth-to-lung. If you bought an Endura because you wanted something that draws like a cigarette, this coil keeps it that way. It is not built for big clouds or direct-lung pulls. Pair it with a nic salt or a 50/50, and you get a smooth throat hit with proper flavour definition. That is what the Endura line was always about.

Sealed Until You Need Them

Each coil is individually wrapped inside the box. Rip one open when your current coil dies, and the other four stay sealed. No dust on the cotton, no oxidation on the wire, no worrying about how long the pack has been sitting in a drawer.

What E-Liquid to Use

50/50 or nic salts. High-PG works too. Do not put a thick, High-VG Shortfill through this coil. The liquid is too viscous for the ports to keep up with, and you will end up with dry hits, especially if you vape frequently. A 10ml nic salt bottle is the natural pairing. Tobaccos, fruits, menthols all sit well on a tight MTL draw. Have a browse through our e-liquid range on Pirate Vapes and grab a bottle with the coils.

How to Replace Your Innokin Endura T18E Coil

1. Turn your vape upside down and unscrew the metal base cap. Keep the tank upside down so your e-liquid doesn't spill out.

2. Simply pull the old coil straight out of the center of the tank and pop it in the bin.

3. Unwrap your new coil. Drip a few drops of e-liquid directly onto the exposed white cotton through the holes on the side. This priming step stops the wick from burning instantly.

4. Look for the two flat edges on the sides of the coil. Align them with the slots in the tank and push the coil straight in until it sits flush. Do not twist or try to screw the coil in.

5. Screw the metal base cap back on until finger-tight. Flip the tank right side up, top up your e-liquid if needed, and wait 5 to 10 minutes before vaping so the cotton fully saturates.

That standing time lets the cotton soak properly. If you fire it dry, you will burn the wick straight away. A burnt coil cannot be fixed. You just have to open another one.

What's in the Box

Five Innokin Prism T18E coils at 1.5Ω. Individually wrapped. Nothing else. No e-liquid, no tank, no device.

Check Your Tank Before You Order

This catches people out more than anything else we see. The T18E coils are physically shorter than the old T18 and T22 coils. They are not the same part. If you own an original Endura T18 or T22, these will not seat properly in your tank, and you need the longer Prism T18/T22 coils instead.

The easy way to check: look at the name printed on your tank. If it says T18E, T18II, T18X, T22 Pro, T18E Pro, or T22E, you are in the right place. Anything else, head to our Innokin Range and find the matching coil there.

About Innokin

Innokin has been making vape hardware for years, and the Endura line is probably its best-known range in the UK. The T18 started out as a simple pen-style kit for people coming off cigarettes. Tight draw, small size, no settings to fiddle with. The Prism tank and this coil system are the core of that.

Nic salts and 50/50 liquids, clean flavour, easy coil changes. It is still one of the first kits that gets recommended in most UK vape shops, partly because it works well and partly because the coils are dead easy to find. That reliability is why people keep buying them.

Stock Up and Save

Coils run out. That is just how it goes. Worth keeping a spare pack around so you are not stuck vaping on a burnt coil while you wait for a delivery. Chuck a bottle of nic salt in with the order, and you are done.

Plain packaging, tracked to your door, age-verified checkout, 18+ delivery. Crew Rewards points go on every order as well. Or set up The Crow's Nest and get them posted to you automatically with a bit off the price each time.

Conclusion

Burnt taste, weak vapour, muted flavour. Your coil is done. Thread in a fresh 1.5Ω, let it soak, and the Endura goes straight back to normal. Five genuine Innokin coils per pack, Japanese organic cotton, no-spill swap from the base.

Make sure you are buying for the right tank, though. T18E, T18II, T18X, T22 Pro, T18E Pro, T22E: yes. Older T18 or T22: no, wrong coil. Grab yours from Pirate Vapes with tracked, age-verified UK delivery.

FAQs

Which devices do these fit?

Endura T18E, T18II, T18X, T22 Pro, plus the Prism T18E Pro and T22E tanks. Not the original T18 or T22. Different-length coil entirely.

What e-liquid should I use?

50/50 or nic salts. High-PG is fine too. Avoid thick high-VG shortfills. They do not wick fast enough, and you will get dry hits.

How long before I need to change one?

Depends how much you vape and what liquid you use. Somewhere between one and three weeks usually. Sweet flavours kill them faster.

Do I have to prime it first?

Yes. Drop e-liquid onto the cotton through the ports, fill the tank, and leave it for five to ten minutes. If you skip that, the cotton burns on the first draw and the coil is ruined.

How many in a pack?

Five. Each one is wrapped separately.

Does my old Endura T18 take different coils?

Correct. The original T18 and T22 tanks use longer coils. These shorter T18E coils will not fit those tanks. Check the name on your tank to be sure.