Innokin VCAP Replacement Pods

Keeping an Innokin Trine or Endura V topped up is as simple as slotting in a fresh pod. These refillable VCAP pods hold 2ml of your own e-liquid, fill from the top without pulling the pod off the device, and carry a mesh coil built in for clean, full flavour.

Pick your resistance to set the draw: 1.2Ω for a tight, cigarette-style pull, 0.8Ω for an everyday middle, or 0.6Ω for something looser and warmer. A magnetic base clicks them home, and they are TPD-compliant and MHRA-notified. Pirate Vapes ships them fast, age-verified across the UK.

Why vapers choose this:

• The coil is built into the pod, so there is nothing extra to fit, prime or clean.

• Fill from the top without taking the pod off the device, quick and mess-free.

• A choice of resistances to set a tight or looser draw to your taste.

• A mesh coil that heats evenly for cleaner, fuller flavour than old wire coils.

• Genuine Innokin pods, TPD-compliant and MHRA-notified for the UK.

Innokin VCAP Replacement Pods Features

A Mesh Coil for Cleaner Flavour

Each pod has a mesh coil sealed inside. Mesh spreads the heat across a wider surface than an old-style wire coil, so it warms your e-liquid quickly and evenly. In plain terms, that means sharper, truer flavour and smoother vapour, and it holds up well from a full pod down to the last of it.

Fill It Without Taking It Off

Refilling is done from the top: lift off the mouthpiece, add your e-liquid, and pop it back. You do not need to pull the pod out of the device, so there is no fumbling and far less mess. The leak-proof design keeps the juice where it should be, in the pod, not your pocket.

A Resistance for Your Draw

The number on the pod sets how the vape feels. The 1.2Ω gives a tight, cigarette-style draw (MTL, drawn into the mouth first). The 0.8Ω is the everyday middle. The 0.6Ω loosens and warms things up, edging toward a gentle lung hit (RDL). Pick to suit how you like to vape.

Clicks On, Stays Put

A magnetic base drops the pod onto your device and holds it firmly, so there is no lining up threads or pushing hard. It makes swapping pods a two-second job, and the snug fit keeps the connection reliable and the pod from working loose in a bag or pocket.

Made to Match Your Innokin Kit

These are the genuine VCAP pods, so the fit, the airflow and the flavour are exactly what your device was designed around. One pod type covers Innokin's Trine and Endura V families, so if you own more than one, or upgrade later, the same spares still work.

Innokin VCAP Replacement Pods Resistance Options

These pods are refillable, so there is no flavour to choose; you fill them yourself. What you pick is the resistance, and each one leans towards a different draw. Not sure where to start? The 0.8Ω is the easy all-rounder.

• 0.8Ω - the balanced, everyday pick, a comfortable MTL draw

• 1.2Ω - the tightest, most cigarette-like pull, easy on battery

• 0.6Ω - looser and warmer, with a bit more vapour

There is also a 0.4Ω for the airiest draw, though it comes only in a 3-pack and does not fit every device (see below). As a rule, the 0.8Ω and 1.2Ω suit a 50/50 juice or nic salt, while the lower resistances open up on a slightly higher-VG liquid. Pick your flavour from our e-liquid range at Pirate Vapes.

How to Set Up the Innokin VCAP Replacement Pods

1. Take the old pod off your device and set it aside.

2. On the fresh pod, pull off the mouthpiece to reveal the fill hole, add your e-liquid, then press the mouthpiece back on.

3. Stand the pod upright for around five minutes so the mesh coil soaks up the liquid.

4. Click the pod onto the magnetic base, set your airflow, and vape. Skipping the soak is the usual cause of a burnt first puff, so it is worth the wait.

What's in the Innokin VCAP Replacement Pods Box

Depending on the pack you choose, you get either a single refillable VCAP pod or three, all in the one resistance you select, each with the mesh coil already sealed inside. There is nothing else to fit; just add your e-liquid. The device is bought separately, and you can grab a bottle of nic salt or 50/50 to fill them.

The Right Pods for Your Innokin Trine and Endura V

About Innokin

Innokin has been part of vaping since the early days and is a name most vapers trust, with a shelf full of industry awards to show for it. It made its reputation on no-nonsense mouth-to-lung gear like the Endura and Sceptre, the kind of kit people reach for when leaving cigarettes behind.

That same focus on reliable, everyday performance runs through the VCAP pods: solid mesh coils, a clean top-fill, and a proper fit on genuine hardware. For anyone running a Trine or Endura V, sticking with real Innokin spares is the way to keep the flavour and fit exactly as intended.

Stock Up and Save

Pods are the part you replace most, so a 3-pack, or a couple of them, keeps you going for weeks and brings the price per pod down. Everything we send is genuine Innokin, packed with care and dispatched tracked so you can follow it to your door.

Checkout is age-verified with 18+ delivery, and every pod is the 2ml TPD size and MHRA-notified. Prefer not to think about reordering? The Crow's Nest can post your chosen resistance to you on repeat, with a saving each time.

Conclusion

If you run an Innokin Trine or Endura V, these are the pods to keep spare. You fill them yourself, so you keep full control over flavour and strength, and the mesh coil holds that flavour clean before a quick, magnetic swap.

Three resistances (four, if you count the 0.4Ω) cover everything from a tight cigarette-style draw to a looser, warmer one, and the top-fill design keeps refills tidy. Just match the resistance and e-liquid to how you like to vape. Grab a pack from Pirate Vapes with fast, age-verified UK delivery.

FAQs

Can I refill without taking the pod off my device?

Yes, that is the point of the top-fill design. Lift off the mouthpiece, add your e-liquid through the hole, and press it back on; the pod can stay on the device the whole time.

Which resistance should I go for?

The 0.8Ω is the safe all-rounder. Choose 1.2Ω for the tightest, most cigarette-like draw, or 0.6Ω for a looser, warmer vape with a little more vapour.

Will the 0.4Ω pod fit my kit?

Only some. The 0.4Ω works with the Trine and the Endura V Box, but not the Trine SE or the standard Endura V. The 0.6Ω, 0.8Ω and 1.2Ω fit all four.

Do I ever swap just the coil?

No, and that keeps things simple. The coil is sealed inside the pod, so when the flavour starts to dull, you fit a whole fresh pod, nothing to unscrew or re-wick.

How long will one pod last?

Usually one to two weeks, though it depends on how much you vape and the e-liquid you use. Dark or very sweet juices tend to tire a coil faster.

Are these genuine and UK-compliant?

Yes. They are authentic Innokin VCAP pods, each a 2ml TPD capacity and MHRA-notified, sold to over-18s through an age-verified checkout.