Innokin Zenith Minimal Replacement Tank

Innokin Zenith Minimal Replacement Tank

One tank that covers a tight cigarette-style draw and a looser restricted lung hit, depending on which coil you drop in. The Innokin Zenith Minimal is a 2ml refillable MTL and RDL tank on a 510 connection, running the full Innokin Z-Coil range and filling through a quarter-turn locking top cap.

It ships with a 0.8ohm MTL coil and a 0.3ohm RDL coil, so both styles are covered from the first fill. At 24mm wide, it sits neatly on a pen battery or a slim tube mod. A sensible pick among MTL Tanks for anyone who wants versatility without the fuss.

Why vapers choose this:

• Two draws from one tank. The pre-fitted 0.8ohm gives you a proper mouth-to-lung hit for nic salts and 50/50 juice, and the spare 0.3ohm swaps in for a warmer, airier restricted lung vape. You settle on your style without buying a second tank.

• Plug-pull coils. Pull the old one out, push the fresh one in. The 510 contact sits inside the coil itself, so there is no threading to line up.

• Quarter-turn top cap locks shut, which cuts the leaks and mis-fills that plague cheaper top-fill tanks.

• 24mm slim. Fits pen batteries and narrow tube mods without looking oversized.

• Takes the whole Z-Coil family, so as your taste shifts you are not locked into two resistances.

Innokin Zenith Minimal Features

Easy Quarter-Turn Top Fill

Innokin moved to a locking top cap on this one, and it makes a difference. A quarter-turn anticlockwise unlocks it, you fill, and a quarter-turn back seals it. Fewer points of failure than a screw thread, and the tank stays put on your mod the whole time. Pair it with a decent 50/50 E-Liquid and refills take seconds.

Quick Push-Fit Coil Change

Threaded coils cross-thread, strip and trap liquid. These do not. The Z-Coil pushes straight into the base and pulls straight out, with the 510 contact built into the coil. Changing a coil is clean, quick, and does not need the tank emptied first. Honestly, once you have used a plug-pull system, going back to screw-in coils feels like a chore.

Adjustable MTL And RDL Airflow

The bottom airflow ring turns smoothly with no clicks and holds its position between sessions. Narrow it to a thin slot for a tight MTL draw that suits the 0.8ohm. Open it wider on the 0.3ohm, and you get a restricted direct lung hit with more air behind it. Swapping the included Drip Tips And Mouthpieces between the MTL and RDL tips fine-tunes it further.

Strong Steel And Pyrex Build

Stainless steel through the body, Pyrex for the glass. Nothing flashy, which is the point of the Minimal line. It is a tank designed to be reliable and quiet rather than loud, and the parts that wear are cheap to replace when the time comes.

MTL And RDL Vaping Options

Most tanks pick a lane. This one runs genuine MTL for ex-smokers who want a cigarette-style draw, then flips to RDL for anyone chasing a bit more cloud. Keep it topped up with fresh Vape Coils from the Z-Coil range and it adapts to whatever you fancy that week.

Innokin Zenith Minimal Colours

Four finishes in the store picker, all on the same slim stainless body. Darker tones hide fingerprints; the polished and anodised options catch the light more. Choose whichever suits your mod.

#buttons

• Black
• Gun Metal Grey
• Stainless Steel
• Seven Colour

How to Set Up the Innokin Zenith Minimal

Quick job, under two minutes plus the soak.

1. Unscrew the base and pull the old coil straight out if you are fitting the spare.

2. Line the fresh Z-Coil up between the two guide marks and push it firmly into the base until it seats.

3. Wet the exposed cotton with three or four drops of e-liquid through the coil ports so it is not dry going in.

4. Screw the base back on, then quarter-turn the top cap open and fill with 50/50 or high-PG liquid.

5. Once filled, leave the tank standing for a good seven to eight minutes so the cotton wicks through completely.

6. Fit the MTL or RDL mouthpiece to match your coil, start at the low end of the wattage range and build up.

What's in the Innokin Zenith Minimal Box

The standard package arrives with:

• the tank,

• a 0.8ohm MTL Z-Coil already fitted,

• a spare 0.3ohm RDL Z-Coil,

• the MTL and RDL mouthpieces

• and a user manual.

That covers both vaping styles straight away. It does not include any e-liquid, and it does not include a mod or battery, so you will need a 510 device to run it. Keep a spare Replacement Tank Glass in the drawer for the day the Pyrex takes a knock.

Fits Almost Any 510 Mod

The Zenith Minimal uses a standard 510 connection, so it drops onto essentially any regulated mod that reaches the coils' wattage range. The 24mm base means it looks right on slim pen batteries as well as full-size Vape Mods, and the team at Pirate Vapes can help if you are unsure your device suits it.

What it will not do is fit pod systems, since those have no 510 thread. Run it on a mod that can push 15W for the MTL coil or up to 40W for the RDL coil, and it performs across both.

E-Liquid Pairing

This tank is built around MTL and RDL, so 50/50 or high-PG liquid wicks best. Nic salts at 10 to 20mg in a 50/50 base pair naturally with the 0.8ohm coil for that tight, satisfying draw. If you are running the 0.3ohm for RDL, drop to a lower-strength freebase around 3 to 6mg.

High-VG juice above 60% wicks slowly at these wattages and can give you dry hits, so keep the thicker liquids for a sub-ohm tank. Browse 20mg Nic Salts if the MTL coil is your main use.

About Innokin

The Zenith name has been a fixture in mouth-to-lung vaping since the original launched, and it built its reputation on coils that last and tanks that do not leak. The Minimal strips the line back to essentials: the plug-pull Z-Coil platform, a locking cap and simple airflow, at a lower price than the flagship models.

Innokin hardware tends to be the sort of thing vapers keep for years rather than replace every few months, which is why the Innokin Vapes range stays a steady seller for daily MTL users.

Stock Up and Save

Z-Coils are the recurring cost with any refillable tank, so it pays to keep a five-pack of your preferred resistance on hand rather than waiting for a burnt hit.

Pirate Vapes dispatches every order the same day when it is placed before 4 pm, with padded packaging on every parcel. All hardware is sold to over-18s only through age-verified checkout, and every tank ships TPD compliant at the 2ml UK capacity.

Conclusion

The Innokin Zenith Minimal is a straightforward, well-built tank for anyone who wants both a tight MTL draw and a looser RDL hit from a single piece of kit. Two coils in the box cover both styles from day one, and the plug-pull system keeps coil changes painless.

Pair it with a battery from our MTL Vape Kits or a spare part from the Vape Accessories shelf, all from Pirate Vapes.

FAQs

What coils fit the Zenith Minimal?

The full Innokin Z-Coil series, eight options in total. The box includes the 0.8ohm MTL (15 to 18W) and the 0.3ohm RDL (30 to 40W). They push straight in, no threading.

Is the Zenith Minimal MTL or RDL?

Both. Run the 0.8ohm with narrow airflow for a tight mouth-to-lung draw, or the 0.3ohm with the airflow open for a restricted direct lung hit.

How much does the Zenith Minimal hold?

2ml, in line with UK rules. Refill through the quarter-turn top cap without taking it off the mod.

What e-liquid should I use in the Zenith Minimal?

50/50 or high-PG. Nic salts at 10 to 20mg suit the 0.8ohm. High-VG above 60% wicks too slowly here and risks dry hits.

Will the Zenith Minimal fit my mod?

If your device has a 510 thread and reaches the coil's wattage, yes. The 24mm base works on slim pens as well as box mods. It will not fit pod kits.

How do I change the Zenith Minimal coil without a mess?

Unscrew the base, pull the old coil out, line the new one up with the guide marks, and push it in. The tank does not need emptying first.