Lost Vape E-Plus Replacement Pods

Lost Vape E-Plus Replacement Pods

Four pod options across two draw styles, each a 2ml refillable cartridge with a built-in mesh coil, sold three to a pack. These are the genuine Lost Vape E-Plus pods for the Thelema Elite 40 range.

There is no separate coil to fit: the mesh is inside the pod, so when the flavour fades, you swap the whole thing. Pick a 0.3ohm or 0.45ohm for a cloudier direct-lung draw, or a 0.6ohm for a tighter mouth-to-lung. Browse more Replacement Pods to keep your kit going.

Why vapers choose these pods:

• Two draws, one kit. The lower-ohm pods run a cloudier direct-lung draw while the 0.6ohm options give a tighter mouth-to-lung, so a single Thelema Elite can feel like two different devices depending on which pod is in.

• Built-in mesh means no coil fitting. The coil lives in the pod, heats evenly, and holds flavour well until you swap the pod.

• They are the genuine Lost Vape pod, and with pod cartridges that matters: authentic pods seat cleanly, wick properly and last, where clones leak and dry-hit.

• Side-fill with a silicone plug and a clear body make refilling quick and mess-free, with your liquid level always in view.

• Three to a pack covers weeks of everyday vaping.

Lost Vape E-Plus Pod Features

Built-In Mesh Coil

Each E-Plus pod arrives with its mesh coil built in, so there is nothing to screw in or prime separately from the pod. Mesh heats the liquid across a broad, even surface, which keeps the flavour full and cuts the burnt edge that creeps into worn coils. When a pod finally tires, you drop in a fresh one and carry on.

Three Resistance Options

The spread is the appeal. Run a 0.3ohm or 0.45ohm with the airflow open for warm, cloudy direct-lung hits, or fit a 0.6ohm and tighten up for a mouth-to-lung pull closer to a cigarette. One kit, one pod swap, and a genuinely different vape.

Easy Side-Fill Pod

Refilling is a ten-second job. Lift the silicone plug marked on the side of the pod, slot your bottle nozzle into the port, and fill to just under the top. The transparent body means you can see exactly where the liquid sits, so there is no guesswork and no overfilling.

Dual Mesh Resistance Readings

Worth knowing before you panic: the dual mesh pods show a different number on your device screen than the one printed on the pod, because there are two coils inside. The 0.45ohm reads as 0.9ohm, and the 0.6ohm dual mesh reads as 1.2ohm. That is normal and does not affect performance.

Suitable for Different E-Liquids

Resistance decides your juice here. The 0.6ohm options suit nic salts and thinner 50/50 liquid, so reach for our Nic Salts with those. The lower-ohm direct-lung pods prefer a thicker, higher-VG freebase, so pair the 0.3ohm and 0.45ohm with a High VG E-Liquid.

Lost Vape E-Plus Pod Resistance Options

All four stocked pods share the same 2ml refillable body and side-fill system. What changes is the draw, the wattage, and the cloud. Start low and build up until the flavour is fullest.

0.3ohm Mesh (DTL): The cloudiest option, running roughly up to 40W. Best for a direct-to-lung draw with higher-VG freebase liquid. Reach for this if you want vapour and a looser pull.

0.45ohm Dual Mesh (DTL): A slightly tighter direct-lung pod running up to about 30W, sitting between the 0.3ohm and 0.6ohm for vapour. A 70% VG shortfill suits it well. Note it displays as 0.9ohm on the screen.

0.6ohm Mesh (MTL): A tighter mouth-to-lung and restricted direct-lung pod, running up to around 22 to 25W. It produces less vapour and pairs best with nic salts or 50/50 liquid. The discreet, flavour-forward choice.

0.6ohm Dual Mesh (MTL): The dual-coil take on the 0.6ohm, again suited to a tighter mouth-to-lung draw up to about 25W with salts or 50/50. It displays as 1.2ohm on the screen.

#buttons

• 0.3 Ohm Mesh
• 0.45 Ohm Dual Mesh
• 0.6 Ohm Dual Mesh
• 0.6 Ohm Mesh

How to Set Up the Lost Vape E-Plus Pods

Fill, soak, vape. Under a minute to prep, but the soak is the part that counts.

1. Remove a fresh pod from the packaging and peel off the protective isolation sticker from the base. (If you leave this on, the device will not detect the pod.)

2. Lift the silicone plug on the side of the pod, marked to show the fill port. It pops up cleanly with a fingernail.

3. Fill to just under the top with the e-liquid that matches your resistance, then press the plug firmly back into place to seal it.

4. Fit the pod into your device by pushing it into the magnetic bay until it clicks home.

5. Stand the device upright for five to ten minutes so the internal cotton soaks completely through before any power reaches it. Skipping this is the fastest way to permanently burn a fresh pod.

6. Set a sensible wattage for the pod (lower for a 0.6ohm, higher for a 0.3ohm), and take a few gentle draws to start.

7. Top up before the pod runs dry to keep the coil wet, and fit a brand new pod once the flavour starts to fade.

What's in the Lost Vape E-Plus Pod Box

Three genuine Lost Vape E-Plus refillable pods in your chosen resistance, each with its mesh coil built in. There is no e-liquid, no device, and no separate coils included, just the pods, ready to fill.

Pods for the Lost Vape Thelema Elite 40 Range

The E-Plus pod is made for the Lost Vape Thelema Elite 40, Thelema Elite Art 40 pod kits, and the same pod family also fits several other Lost Vape devices including the Thelema Elite S, Thelema Nano, Centaurus E40, Centaurus E40 Max and Centaurus E40 Ultra. They drop straight into the magnetic pod bay and sit alongside our wider Refillable Pod Kits and MTL Vape Kits.

What will not fit: pods from other Lost Vape ranges such as the Orion or Ursa series. The E-Plus is its own format. If your kit is not part of the Thelema Elite or Centaurus E40 family, check the model before ordering, since Lost Vape runs several pod systems that look similar but do not interchange.

About Lost Vape

Lost Vape built its name on premium, well-engineered hardware, from the leather-clad DNA-chipped mods that made it a favourite among enthusiasts to the Thelema and Centaurus pod ranges that followed.

The E-Plus pod system carries that same focus on build quality into a simple refillable cartridge, with a clean side-fill, a clear body and a choice of mesh resistances. For anyone running a Thelema Elite or Centaurus E40, these are the pods the device was designed around.

Stock Up and Save

Pods are a consumable, so a spare set in the drawer is never wasted, and buying a resistance for each draw style turns one Thelema Elite into two very different vapes. It is worth keeping the box or noting the serial too, since Lost Vape asks for it on any warranty claim.

Order from Pirate Vapes and these are 100% genuine Lost Vape pods, not clones, dispatched same day when you order before 4 pm through an age-verified, over-18s checkout.

Conclusion

The Lost Vape E-Plus pods keep a Thelema Elite 40 tasting the way it should, with four refillable options that swing from a cloudy 0.3ohm direct-lung to a tight 0.6ohm mouth-to-lung.

Genuine 2ml pods, built-in mesh and an easy side-fill make them a simple, low-cost restock. Match the pod to your draw and your liquid, and the kit does the rest. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Which devices do E-Plus Replacement pods fit?

The Lost Vape Thelema Elite 40 and Elite Art 40, plus the wider family including the Thelema Elite S, Thelema Nano, Centaurus E40, E40 Max and E40 Ultra. Check your model if it is not one of these.

Do I need to buy E-Plus Replacement Pod coils separately?

No. The mesh coil is built into each pod, so there is nothing to fit. When the coil tires, you replace the whole 2ml pod.

Why does my Lost Vape E-Plus screen show a different resistance?

Because the dual mesh pods contain two identical coils (e.g., two 0.9ohm coils making a 0.45ohm pod), the device's screen will often read the single-coil value. The 0.45ohm will show as 0.9ohm, and the 0.6ohm dual mesh will show as 1.2ohm. This is a normal part of the advanced coil design and doesn't affect your vape.

Which E-Plus Replacement pod is best for nic salts?

The 0.6ohm options. Their tighter mouth-to-lung draw and lower power suit nic salts and 50/50 liquid. The 0.3ohm and 0.45ohm are better with higher-VG freebase.

How much e-liquid do E-Plus Replacement Pods hold?

Each pod holds 2ml, in line with UK regulations, and refills through the side port with a silicone plug.

Are E-Plus Replacement Pods genuine Lost Vape pods?

Yes. These are authentic Lost Vape E-Plus pods, not clones. Genuine pods seat properly and last, which cheap copies rarely do.