Lost Vape UB Lite Coils

Lost Vape UB Lite Coils

Four resistances, from 0.4 to 1.4 ohm, in one coil family. The Lost Vape UB Lite coils are the mesh replacement heads for the URSA Mini and its siblings, wicked with organic cotton over a Kanthal mesh element for clean flavour and steady vapour. They press straight into the pod with no threading, and the recommended wattage is printed on each coil so you are never guessing.

Sold in a pack of 5 across all four resistances, they cover everything from a tight MTL draw to a warmer, cloudier RDL one. Browse the rest of the Vape Coils range at Pirate Vapes. Over 18s only.

Why vapers choose these:

• Four resistances in one range means you can dial the whole character of your vape, from a tight cigarette-style pull on the 1.4 ohm to warm, cloudy draws on the 0.4 ohm, all in the same pod.

• Kanthal mesh with organic cotton heats evenly and wicks fast, so flavour stays accurate from the first pull to the last.

• Press-fit fitting takes seconds. Pull the old one, push the new one in.

• Printed wattage windows take the guesswork out of every swap.

• A pack of five keeps spares at home and one in your bag, since coils are a weekly consumable with daily use.

UB Lite Coils Features

Kanthal Mesh For Even Heating

The heating element here is a Kanthal mesh, the KA1 alloy you will see marked on the coil itself. Mesh spreads the heat across a wider surface than old wound wire, which means faster ramp-up and a more even burn across the cotton. In practice, you get sharper flavour and fewer dry spots, and the coil holds that taste for longer before it starts to fade.

Four Coil Resistance Options

This is the real appeal of the range. Drop in the 1.4 ohm for a tight, cigarette-like MTL draw, or the 0.4 ohm for a warm, airy RDL with real vapour behind it. The two middle resistances sit between those extremes. You are not locked into one style, which makes this a flexible platform to grow with. Pair the tighter 1.4Ω, 1.0Ω, and 0.8Ω coils with 50/50 nic salts or 50/50 freebase liquids. Reserve thicker High-VG Liquids exclusively for the 0.4Ω cloud coil.

Recommended Wattage Range

Every coil has its recommended power range stamped on the side. No manual, no searching. Fit the coil, read the number, set your device inside it. For anyone who has burnt a fresh coil by running it too hot on the first fire, that small detail saves both the coil and the flavour.

Fast-Wicking Organic Cotton

Under the mesh sits organic cotton rather than a synthetic wick. It draws liquid quickly and keeps up with the mesh even on the lower-resistance coils, which is where poor wicking usually shows itself as a dry hit. Give it a proper soak before the first vape, and it rewards you with a clean, consistent draw.

Easy Press-Fit Coil Change

Swapping is genuinely quick. The coil pushes into the base of the pod and pulls back out, with no screwing and no cross-threading to worry about. The coil sits proud enough to grip easily, so even a fiddly change takes under a minute. Restock through the wider Replacement Pods and coils section when you are running low.

UB Lite Coils Resistance Options

Four options in the picker, each suited to a different draw. The choice comes down to how tight you want the pull and how much vapour you are after.

#buttons

• 0.4 Ohm
• 0.8 Ohm
• 1.0 Ohm
• 1.4 Ohm

How to Set Up the UB Lite Coils

A quick press-fit swap. A couple of minutes, most of it soaking.

1. If using a pod kit (like the URSA Mini), remove the pod and empty any remaining liquid. (If you are using the UB Lite Tank on the Thelema Mini, unscrew the 510 threaded bottom base to access the coil).

2. Pull the old coil straight out of the base. It unplugs without twisting.

3. Prime the new coil by dripping a couple of drops of e-liquid onto the exposed cotton on the side ports, and place one drop directly down the top centre hole onto the mesh element itself.

4. Push the fresh coil firmly into the pod or tank base until it seats, then refill your tank with e-liquid.

5. Leave it upright for a full ten minutes so the organic cotton drinks the liquid all the way through. Rushing this is the fastest way to ruin a new mesh coil.

6. Start at the low end of the coil's printed wattage window and build up until the draw feels right.

What's in the UB Lite Coils Box

Five UB Lite coils in your chosen resistance. No pod, no device, and no e-liquid are included. Just the coils, ready to press into a pod you already own.

The Mesh Coil for the URSA Mini and UB Lite Family

These are purpose-built for Lost Vape's UB Lite platform. That means the URSA Mini pod kit, the UB Lite pod kit, the UB Lite Tank, and the Thelema Mini all take them. Fit is secure, and contact is clean, which is what you want from a coil made for the device rather than a universal part.

What they do not fit: the UB Mini coil devices such as the URSA Nano, Baby, Pro, and S, which run a completely separate coil series despite the similar naming. If your kit is an URSA Mini or a UB Lite, you are in the right place. If it is an URSA Nano or Baby, it takes UB Mini coils instead. When in doubt, check the coil currently in your pod before ordering, and pair the tighter resistances with a low-wattage MTL Vape Kits setup.

About Lost Vape

Lost Vape built its name on premium mod craftsmanship, with leather-and-alloy devices like the Centaurus and Thelema that sit a cut above the usual plastic pod. That same attention to detail runs through the UB Lite coil line.

The mesh is consistent, the wicking is dependable, and the coils hold their flavour well past the point where cheaper heads start to taste burnt. For URSA Mini owners, sticking with genuine UB Lite coils is the difference between a device that performs as designed and one that never quite tastes right.

Stock Up and Save

The smart move with a four-resistance range is to try more than one. A pack of the 1.0 ohm for daily MTL, plus a pack of the 0.4 ohm for cloudier sessions, covers both moods and means you are never stuck on a burnt coil.

At daily use, each coil lasts a week or two, so a five-pack goes a long way. Every order from Pirate Vapes ships same day when placed before 4 pm, in padded packaging. Age-verified checkout, over 18s only.

Conclusion

The Lost Vape UB Lite coils are the straightforward way to keep an URSA Mini or UB Lite tasting the way it should. Four resistances, Kanthal mesh, organic cotton, and printed wattage windows make them easy to live with, whether you vape tight MTL or a warmer RDL.

Genuine coils in a pack of five, ready to press in and go. Browse the full coil range, more Multi-Buy Deals, and the rest of the catalogue at Pirate Vapes.

FAQs

How many UB Lite Coils are in a pack?

Five, all in your chosen resistance. At daily use you will go through roughly one a week or two, so a pack lasts most vapers a couple of months.

Which UB Lite Coils resistance should I pick?

For a tight, cigarette-style draw, go for the 1.4 ohm or 1.0 ohm. For more warmth and vapour, the 0.8 ohm or 0.4 ohm suits you better.

What wattage do UB Lite Coils run at?

Each coil has its window printed on the side: 20 to 30W for the 0.4 ohm, 12 to 17W for the 0.8 ohm, 10 to 15W for the 1.0 ohm, and 8 to 10W for the 1.4 ohm.

What devices do UB Lite Coils fit?

The Lost Vape URSA Mini, UB Lite pod kit, UB Lite Tank, and Thelema Mini. They do not fit the URSA Nano, Baby, Pro, or S, which use the separate UB Mini coils.

What e-liquid works best with UB Lite Coils?

Nic salts and 50/50 freebase blends perfectly suit the 0.8, 1.0, and 1.4 ohm coils. The 0.4 ohm coil has larger wicking ports and runs hotter, meaning it is the only coil in this set that prefers a thicker High-VG freebase liquid for smoother, bigger clouds.

How long does a UB Lite Coil last?

Around one to two weeks with regular daily use. Sweeter, darker liquids gunk the mesh faster and will shorten that.