Aspire Breeze 2 Replacement Coils

Aspire Breeze 2 Coils

Three resistances, one pocket-sized AIO to keep alive. The Aspire Breeze coils are the genuine U-Tech replacement heads for the original Breeze and the Breeze 2 pod kits, sold five to a pack. Each one wraps a Kanthal element in organic cotton, and channels air down through the coil body, which warms the draw and lifts flavour on a low-power device.

Choose 0.6 ohm, 1.0 ohm, or 1.2 ohm to set how tight and warm your vape feels. These are built for steady MTL vaping, not sub-ohm clouds. Pairs neatly with other MTL Pod Kits.

Why vapers choose this:

• One coil family, three different draws. The same U-Tech head comes in 0.6, 1.0, and 1.2 ohm, so you can retune the warmth and throat hit of your Breeze without buying a new device or touching a setting.

• U-Tech airflow pulls air down through the coil body before it reaches the wick, warming it and sharpening flavour on a low-power MTL kit.

• Organic cotton wicking keeps the taste clean from the first few pulls, with none of the plasticky edge older silica heads carried.

• Five to a pack. Practical.

• Kanthal at low power sips gently at the battery, which counts on the Breeze's compact internal cell.

Aspire Breeze Coil Features

What U-Tech Actually Does

Aspire's U-Tech format routes incoming air down through the centre of the coil rather than straight across it. That pre-warms the air before it meets the organic cotton, so a low-power head still delivers a warm, full MTL draw. On a compact device like the Breeze, that airflow trick is doing a lot of the heavy lifting.

Why Three Resistances?

Because one draw does not suit everyone. The 0.6 ohm runs warmest with the most vapour, the 1.2 ohm pulls tightest and coolest, and the 1.0 ohm sits between them. Same device, same pod, three genuinely different vapes depending on which head you thread in.

A Coil Built for Nic Salts and 50/50

These heads shine with thinner liquid. The wicking ports and low power are sized for nic salts and balanced 50/50 juice, which move through organic cotton easily and keep flavour clean. Running a 1.0 ohm with a good Nic Salt E-Liquid at 10mg or 20mg is about as reliable as pod vaping gets.

Change It in Under a Minute

Old head out, drop of juice on the new one, screw it in. The whole swap is threaded, so there is no press-fit fiddling or magnet alignment to get wrong. If you have changed a Breeze coil before, honestly, you already know the drill.

Low Power on Purpose

The Breeze was never meant to chuck clouds. Running at moderate wattage with a Kanthal element keeps things gentle on the battery and steady on flavour. That restraint is the point: a quiet, cigarette-style vape that lasts the day.

Aspire Breeze Coil Resistance Options

Three heads, all made for the same low-power MTL vaping. What separates them is warmth, vapour, and how firmly the draw hits.

Most people land on the 1.0 ohm. It sits in the middle of the range: a steady, cigarette-style draw that pairs cleanly with 20mg nic salts and gives slightly better battery life than the lower resistance. Stepping over from disposables? Start here.

The 0.6 ohm runs warmer and pushes a little more vapour and flavour with each pull. It leans towards higher-PG or 50/50 Liquids and suits anyone who wants a touch more body from the Breeze without leaving MTL territory.

Tightest of the three is the 1.2 ohm. Least vapour, coolest air, firmest throat hit. It is the one to reach for with higher-strength juice and a properly restricted, tight mouth-to-lung style.

#buttons

• 0.6 ohm
• 1.0 ohm
• 1.2 ohm

How to Change the Breeze Coil

Quick job. A minute or two, no tools.

1. Empty and remove the pod. Press the side release buttons on the Breeze 2, lift the pod free, and tip away any leftover liquid.

2. Unscrew the spent coil from the base of the pod. It threads out anticlockwise.

3. Drip two or three drops of e-liquid straight onto the exposed organic cotton of the fresh head so it never fires dry on the first pull.

4. Thread the new coil in clockwise until it seats finger-tight. Do not force it past snug.

5. Refill, reseat, and leave it stood upright for a full seven minutes while the cotton draws liquid all the way through. Skipping this is how you scorch a brand-new coil.

6. Ease in with a few soft, slow draws. The Breeze runs a fixed output, so there is no wattage to dial. Gentle first pulls do the rest.

What's in the Aspire Breeze 2 Coils Box

Five U-Tech replacement heads in the single resistance you select. That is the lot. No pod, no e-liquid, and no device in the pack, so you will need a working Breeze or Breeze 2 to drop them into.

The Right Coil for Aspire's Breeze AIO Kits

These heads fit two devices and two devices only: the original Aspire Breeze and the Aspire Breeze 2 all-in-one pod kits. Aspire built the coil to move freely between both generations, so a single pack works whichever one is in your pocket.

What they will not fit is anything else Aspire makes. Not the Nautilus tanks. Not the PockeX. Not the Gotek line or the newer pod systems. Each of those runs a different coil platform, so check the head in your device reads Breeze before you order. Shopping for a fresh device instead of a refill? The Refillable Pod Kits collection is the place to look.

About Aspire

Aspire has been a fixture in UK vaping since the early days, and the Breeze line is a slice of that history. The first Breeze arrived as a compact, no-fuss AIO for people who wanted refillable pod vaping without the sub-ohm firehose. The Breeze 2 refined the idea: bigger battery, adjustable airflow, a proper fire button.

The U-Tech coil is the part that carried across both. It is a simple, honest MTL head, and for anyone still running a Breeze, it stays the coil the device was engineered around.

Stock Up and Save

A single head lasts a week or two, so a five-pack is roughly a month of vaping plus a spare. Pick up a couple of packs, and you are set for the season, with no mid-week scramble when the flavour drops off, and you are stuck with a dead coil.

Every order from Pirate Vapes ships same day before 4 pm, with an age-verified checkout and over-18s only. Free Pirate Post kicks in over £40.

Conclusion

The Breeze coils do one job and do it well: keep a classic Aspire AIO running for the price of a coffee. Three resistances cover everything from a warm, flavour-forward pull to a tight, high-nicotine draw, and organic cotton keeps the taste honest right through the coil's life.

If you own a Breeze or Breeze 2, there is little reason to retire it while genuine heads are still on the shelf. Browse more Aspire Coils and Vape Accessories, or head back to Pirate Vapes to finish the basket.

FAQs

Which devices do the Breeze coils fit?

Just two: the Aspire Breeze and the Breeze 2. They swap between both freely. Nothing else in Aspire's range takes them, so check your device before ordering.

Which resistance should I pick in the Breeze coils?

For 20mg nic salts and a familiar cigarette-style draw, the 1.0 ohm. Want more warmth and vapour? Go 0.6 ohm. After the tightest, coolest pull? The 1.2 ohm.

How long does one Breeze coil last?

Roughly a week to a fortnight on daily use. Darker and sweeter liquids cut that shorter as residue builds on the cotton.

Can I use nic salts in the Breeze coils?

Absolutely. The tight MTL draw and low power are made for 10mg and 20mg salts.

Will high-VG e-liquid work in the Breeze coils?

Not really. They are low-power MTL heads, so thick high-VG juice struggles to wick and you will hit dry, burnt pulls. Stick to 50/50 or higher-PG.

Are the Breeze coils genuine Aspire coils?

Yes. They are genuine Aspire U-Tech heads.