Orca Vape San Dynasty Replacement Pods 

Refillable 2ml pods with integrated mesh coils, built for the Orca Vape San Dynasty and the upgraded San Dynasty Pro pod kits. Three resistances in the store picker: 0.4Ω for warm restricted direct-lung draws, 0.6Ω for balanced RDL, and 0.8Ω for a tighter mouth-to-lung pull.

Pack of three, side-fill with a silicone plug, and a magnetic connection that clicks straight into either device. Three optional cotton filter tips in the box for a cigarette-style mouthfeel. Browse the full Vape Pods range for compatible refills.

Why vapers pick these pods:

• Two draw styles, one pod family. The 0.4Ω and 0.6Ω options run warmer RDL. The 0.8Ω keeps things tight and MTL. Same pod shell, different experience.

• Integrated mesh delivers cleaner flavour off the top of the coil's life than round-wire builds at the same wattage.

• Cross-compatible with both the original San Dynasty and the Pro version. One refill pod for both kits.

• Side-fill with a silicone plug means no drips down the side of the pod and no soaked pockets.

• Optional cotton filter tips for anyone wanting a cigarette-style pull. Leave them out for a standard vape feel.

San Dynasty Replacement Pod Features

Mesh Coils, Built-In and Sealed

Each pod ships with a mesh coil already fitted inside the shell. Nothing to install, nothing to prime beyond the initial soak. Mesh spreads heat across a wider surface than a traditional wire coil, so the flavour comes through cleaner and the cotton browns more evenly. Sealed coils also mean fewer failure points. If the pod leaks or tastes burnt, you replace the whole unit, not just a head.

Why the Filter Tip Thing Is Actually Clever

Three cotton filter tips come in the box. Push one into the mouthpiece, and the draw softens, mimicking that damp, slightly muted feel of a traditional cigarette. Skip them and the draw feels like any other pod kit. Simple choice, and honestly? For anyone still transitioning off cigarettes, that small tactile detail matters more than you would think.

Side-Fill With a Proper Silicone Plug

The fill port sits on the side of the pod, sealed by a chunky silicone plug. Pop it open with a fingernail, tilt your bottle in, refill, close. The plug seats firmly enough that leaks through the fill hole are rare, even in a warm car. Pair with any balanced 50/50 E-Liquid and the wicking channels handle it without dry hits.

Magnetic, Not Threaded

The pod locks into the device with magnets rather than a screw thread. Faster to swap, less wear on the contacts, and no cross-threading if you push it in at the wrong angle. It sits securely once seated. You have to actually pull it out.

PCTG Body You Can See Through

The shell uses food-grade PCTG. Rigid, transparent, and shatter-resistant compared to standard plastics. You can eyeball the liquid level without pulling the pod out of the device. Small thing. Saves you a midday surprise dry hit.

San Dynasty Replacement Pod Resistance Options

Three resistances in the store picker. Pick based on how you like to vape and which device you own.

Most versatile: the 0.6Ω pod running at 18–23W. Warm restricted direct-lung draw, decent vapour, works well with 10mg or 20mg nic salts. If you want one pod that covers most sessions, this is the pick.

Cooler and tighter: the 0.8Ω pod at 12–16W. Proper MTL draw, closer to a cigarette pull. Nic salts at 20mg feel firm through it without any harshness. The natural fit for anyone using the San Dynasty as a step down from disposables.

Warmest and most open: the 0.4Ω pod running 25–30W. This one produces the most vapour and pairs best with lower-strength 50/50 liquid. Nic salts at 20mg through a 0.4Ω pod is genuinely uncomfortable, so keep the nicotine down here.

#buttons

• 0.4Ω
• 0.6Ω
• 0.8Ω

How to Set Up the San Dynasty Replacement Pods

Quick swap. Under a minute.

1. Pull the old pod off the device. The magnetic connection releases with a firm tug.

2. Take a fresh pod from the pack and open the side-fill silicone plug.

3. Fill with your chosen e-liquid just below the max fill line. Close the plug firmly until it clicks flush.

4. Sit the pod upright on a table for six minutes so gravity pulls the liquid down through the mesh from all sides. Do not draw on it during this window.

5. Click the pod onto the device. The magnets do the work.

6. Take two or three gentle draws before your first proper puff to finish saturating the coil at the wick tips.

Skipping the soak burns the mesh. That kills the pod on the first draw, and there is no coming back from it.

What's in the San Dynasty Replacement Pod Box

Three refillable 2ml pods in your chosen resistance, plus three cotton filter tips. That's it. No e-liquid, no charger, no device. If you don't already own a San Dynasty or San Dynasty Pro kit, browse the Refillable Pod Kits selection first.

Fits Both San Dynasty Kits, Nothing Else

These pods are designed for the Orca Vape ecosystem specifically: the original San Dynasty Pod Kit and the San Dynasty Pro Pod Kit. The magnetic connection, the pod footprint, and the airflow alignment are all built around those two devices.

They do not fit other Orca Vape products. They do not fit Uwell, Vaporesso, OXVA, or any other brand's pod kit. If you own something other than a San Dynasty or a San Dynasty Pro, these pods will not work for you.

About Orca Vape

Orca Vape is an independent hardware brand that partners with Indonesia-based Gerobak Vapor on the San Dynasty pod system. The collaboration focuses on refillable pod hardware built specifically for MTL and RDL vapers who want more flexibility than a sealed prefilled kit but less complexity than a full mod-and-tank setup.

The San Dynasty line has become the brand's flagship, and this replacement pod is the shared consumable across both the original and Pro versions of the kit. TPD-compliant, sold through UK vape retailers, and paired with matching filter tips for a smoother transition draw.

Stock Up and Save

Three pods per pack is enough for around three to four weeks of daily use before the mesh starts to fade. Grabbing two packs at a time keeps you covered for a month and a half without a scramble.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging, with tracking. TPD compliant, age-verified checkout, over 18s only. Free Pirate Post on orders over £40, or bundle a couple of packs through Multi-Buy Vapes for a better per-pod price.

Conclusion

The San Dynasty Replacement Pods do the fundamentals well. Three resistance options covering both MTL and RDL, cross-compatibility with the original and Pro versions of the San Dynasty kit, a clean side-fill system, and optional filter tips that genuinely help ex-smokers settle into the draw.

Pair with a nic salt at the right strength for your chosen resistance, and you are set. Pick up a pack, or grab spares alongside your kit through Pirate Vapes and the wider vape accessories range.

FAQs

Are the San Dynasty pods prefilled?

No. They are refillable via a side-fill silicone plug. Add your own 50/50 e-liquid or nic salt.

Which kits do San Dynasty Replacement pods fit?

The Orca Vape San Dynasty Pod Kit and the San Dynasty Pro Pod Kit. Nothing else.

Can the San Dynasty Replacement Pods coil be replaced separately?

No. The mesh coil is sealed inside the pod. When it fades, replace the whole pod.

What San Dynasty Replacement Pods resistance should a former smoker pick?

The 0.8Ω at 12–16W. Tight MTL draw, works well with 20mg nic salts, closest feel to a cigarette.

How long does one San Dynasty Replacement Pod usually last?

About seven to ten days of daily use, depending on liquid choice and wattage. Sweeter liquids gunk the mesh faster.

Do I have to use the cotton filter tips?

No. They are optional. Fit one for a softer, cigarette-style pull, or leave them out for a standard pod draw.