Oreco Refillable Pods - Pack Of 3

Oreco Refillable Pods

Refilling beats rebuying. These are the empty 2ml pods that keep an Oreco Model X running, sold three to a pack in either 0.8ohm for a tight MTL draw or 0.6ohm for a looser RDTL pull. You fill them with your own e-liquid, vape until the built-in coil tires, then drop in a fresh one. No separate coils to fit, no waste.

Load them with nic salts or 50/50 up to 20mg, and you decide the flavour and strength, not a factory. If you run the Model X, these are your refills. Browse more Refillable Pod Kits and Replacement Pods at Pirate Vapes.

Why vapers choose these pods:

• Refill and reuse. Fill each 2ml pod with whatever e-liquid you keep on the shelf, again and again, until the coil inside finally gives up. Cheaper than prefilled pods across a month, and you are never boxed into a handful of factory flavours.

• Two draws to pick from. The 0.8ohm stays tight and MTL, the 0.6ohm opens up for a warmer RDTL pull.

• Coil built in. No fiddly coil fitting. When it is spent, the pod goes, and a fresh one takes over.

• Three to a pack. A sensible restock quantity for everyday use.

• Matched to the Model X. Fit, airflow and draw are what Oreco built for the device, rather than a rough approximation.

Oreco Refillable Pods Features

Refillable Means You Are in Charge of Flavour

Prefilled pods lock you into whatever the brand mixed. Fill these yourself and the call is yours: fruit, menthol, tobacco, dessert, whatever you already have. Run Nic Salts for a smooth MTL hit, or a 50/50 freebase if that is more your thing. Your pod, your liquid.

Which Resistance Suits You?

The 0.8ohm runs tighter and cooler, the classic mouth-to-lung draw most ex-smokers reach for. The 0.6ohm loosens into a restricted direct-to-lung pull with a touch more warmth and vapour. Same 2ml pod, same fill port, genuinely different feel. Worth owning both if your mood shifts.

That Built-In Coil

The coil sits inside the pod, not as a separate part you screw in. When the flavour turns dull or muted, that is the coil telling you it is done. You do not clean it or rebuild it. You drop in a fresh pod, keep the device, and carry on. Honestly, less faff than it sounds.

Fill It, Don't Flood It

These pods feature a convenient top-fill design sealed with a silicone plug, meaning you can top up your e-liquid without even removing the pod from the device. Just match the liquid to the draw: thinner blends like 50/50 e-liquids or nic salts wick best through the integrated mesh coils. Thick high-VG juice can struggle to feed the mesh at 0.6 to 0.8ohm, so keep it on the thinner side, and the pod stays happy.

Built for Everyday Carry

This is a pod for daily, practical vaping, not cloud-chasing. It holds the UK-standard 2ml, refills in seconds once you know the port, and slots back into the Model X without ceremony. For a vaper who just wants a dependable refill and no drama, that is the whole brief.

Oreco Refillable Pods Resistance Options

Two coils in the pod, and the choice comes down to how you like to draw.

The 0.8ohm is the one most Model X owners keep loaded. A tight, cool MTL draw that sits close to a cigarette pull, ideal for nic salts at 10 to 20mg. If you came off cigarettes and want that familiar tug, start here.

The 0.6ohm is the airier option. A restricted DTL draw, a shade warmer, with more vapour on the exhale. It pairs better with lower-strength liquid, since more air over a lower resistance can make strong nicotine feel harsh. Good if you have drifted towards a looser style.

#buttons

• 0.6 Ohm 
• 0.8 Ohm

How to Set Up the Oreco Refillable Pods

Quick to do. A minute, maybe less.

1. Lift the used pod out of the device and set it aside.

2. Take a fresh pod and open the silicone top-fill port.

3. Add your e-liquid slowly down the side of the pod, keeping the central airflow tube clear. Fill to just below the max line.

4. Close the top-fill port firmly so it seals. (Note: For future refills, you can leave the pod clicked into the device and just open this top port!)

5. Stand the filled pod upright and leave it to settle for around ten minutes, a little longer with a thicker liquid, so the mesh coil saturates before its first fire.

6. Seat the pod back into the device, take two or three gentle pulls without firing, then vape as normal.

What's in the Oreco Refillable Pods Box

Three refillable pods in the resistance you choose. That is the lot: no device, no e-liquid, and no separate coils to fit, since the coil is already inside each pod.

Need the kit itself or a mix of spares? Pirate Vapes keeps the refills and pods range stocked so you can grab everything in one order.

Made to Fit the Oreco Model X and Model Y

These pods are built specifically for the Oreco Model X and the Oreco Model Y. Same 2ml pod, same fit, whichever resistance you pick, so either the 0.8ohm or the 0.6ohm drops straight into both devices. The Model X and Y sit in the wider world of refillable pod kits, so if you are still choosing a device, that is the category to browse.

Do not assume these fit other Oreco hardware. They absolutely will not fit the Oreco Comet Pro, which uses a completely different, incompatible pod platform. They will not fit pod systems from other brands either. If your device is the Model X or the Model Y, you are in the right place.

About Oreco

Oreco is one of the newer names aimed squarely at the post-disposable UK market. Rather than chase big-cloud sub-ohm setups, the brand builds compact, refillable pod devices like the Model X for vapers who want something simple, pocket-friendly and cheap to run.

These pods are the consumable side of that story: the part you refill and replace to keep the device alive. It is a no-nonsense approach, and for everyday MTL and RDTL vaping, it asks very little of you.

Stock Up and Save

Three pods cover most vapers for a few weeks, and if the Model X is your daily driver, you will always want a spare pack in the drawer. Setting up a recurring order through The Crow's Nest means they turn up before you run dry, with nothing to remember.

Every order from Pirate Vapes is dispatched the same day when placed before 4 pm. Checkout is age-verified, over-18s only, and the pods are 2ml TPD.

Conclusion

If you run an Oreco Model X, these refillable pods are the cheapest way to keep it going: fill your own liquid, vape until the coil fades, then drop in a fresh one.

Pick the 0.8ohm for a tight MTL draw, the 0.6ohm for something looser and warmer, and keep a three-pack on hand either way. Browse the full Vape Accessories range and the rest of what is on offer at Pirate Vapes.

FAQs

Which device do Oreco Refillable pods fit?

The Oreco Model X and the Oreco Model Y. They are made specifically for these two kits. They do NOT fit the Oreco Comet Pro, which uses a completely different pod platform.

Should I choose 0.6ohm or 0.8ohm resistance in Oreco Refillable Pods?

The 0.8ohm is the tighter MTL option, best for nic salts and a cigarette-style draw. The 0.6ohm is looser and warmer, a restricted DTL pull with more vapour.

Do Oreco Refillable Pods come with e-liquid?

No. They arrive empty. You fill them yourself, up to the UK limit of 20mg nicotine.

How long does one Oreco pod last?

Usually a week or two of daily use before the coil dulls. Dark, sweet liquids gunk a coil faster, so a heavy dessert flavour will cut that short.

Can I reuse an Oreco pod once it is empty?

Yes, that is the point. Refill each 2ml pod until the coil inside starts to taste burnt or muted, then replace it with a fresh one from the pack.

What e-liquid works best with Oreco Refillable Pods?

Thinner blends. Nic salts or 50/50 freebase wick cleanly through these pods. Thick high-VG liquid can struggle to feed the coil at these resistances.