Oxva Xlim C Replacement Coils

Five mesh coils per pack. Three resistance options. The OXVA Xlim C coils are press-fit mesh replacements designed for the Xlim C Pod Kit and Xlim C Cartridge. The 0.6-ohm runs at 18-22W for the warmest draw and biggest clouds in the range. The 0.8-ohm runs at 13-17W for a balanced MTL sweet spot.

The 1.2-ohm drops to 8-12W for a gentle, cool MTL pull suited to nic salts at higher strengths. All three are mesh, all three are press-fit, and all three work with both freebase and nic salt e-liquids. Five coils per pack at Pirate Vapes. TPD compliant. Over 18s only.

Why vapers choose the Oxva Xlim C Replacement Coils:

• All three resistances use mesh heating elements. Mesh covers a wider surface than round wire, which means more liquid gets heated per draw and the flavour comes through cleaner. It also means fewer hot spots and less chance of a burnt taste developing prematurely. Even the 1.2-ohm at 8W runs mesh, which is unusual at that resistance. Most brands only put mesh in their sub-ohm coils.

• The 0.8-ohm daily driver coil hits a sweet spot that is hard to find elsewhere. At 13-17W it produces enough warmth and vapour to feel satisfying without draining the Xlim C battery too fast or burning through e-liquid. If you only buy one resistance, this is the one to pick.

• Press-fit coil changes keep things clean and fast. Pull the used coil straight out of the Xlim C cartridge. Push a fresh one in until it seats. No threading, no tools, no e-liquid dripping over your fingers from a stubborn screw connection. Five seconds per swap.

• Three resistances in one coil family means you can experiment without buying a new pod or kit. Want a tighter draw? Drop in the 1.2-ohm. Want more warmth and cloud? Try the 0.6-ohm. Same cartridge, same device, different experience each time.

• Nic salt and freebase compatible across all three resistances. The 1.2-ohm handles nic salts at 20mg with a smooth, cool draw. The 0.8-ohm works with nic salts at 10-20mg or 50/50 freebase at 6-12mg. The 0.6-ohm can handle slightly higher VG blends for vapers who want warmer vapour.

Oxva Xlim C Replacement Coils | Pack Of 5 | Best OXVA Coils Features

Mesh Heating Across All Resistances

Every Xlim C coil uses a mesh heating element regardless of resistance. At 0.6, 0.8, or 1.2 ohm, the mesh surface distributes heat more evenly than round wire. This is a genuine advantage at the 1.2-ohm end, where most competing brands still use standard wire. The result is cleaner flavour even at low wattages.

Press-Fit Installation

No threading. No mess. The coil pushes straight into the base of the Xlim C cartridge and seats firmly. When it needs replacing, pull it out and push a fresh one in. The connection is snug enough that the coil does not come loose during normal use, but easy enough to remove by hand without tools.

Three Wattage Ranges for Three Draw Styles

The 0.6-ohm at 18-22W gives you warmth and vapour production closer to a restricted DTL draw. The 0.8-ohm at 13-17W is the balanced middle ground for daily MTL use. The 1.2-ohm at 8-12W is the coolest, gentlest option for vapers who prefer a mild throat hit and longer battery life per charge.

Nic Salt Optimised Wicking

The cotton wicking in all three Xlim C coils is designed for the thinner viscosity of nic salt and 50/50 E-Liquids. The wicking ports are sized to absorb these liquids quickly without flooding or dry-hitting. If you run high VG (70/30 or thicker) through these coils, expect slower wicking and potential dry hits on chain vaping.

Designed Exclusively for the Xlim C Cartridge

The Xlim C coils fit one cartridge and one cartridge only. They do not cross with other OXVA pod platforms like the Xlim V2, Xlim SQ, or Xlim Pro. That exclusivity means OXVA tuned the coil geometry, wicking, and airflow interaction specifically for the Xlim C cartridge's chamber size and draw.

Oxva Xlim C Replacement Coils | Pack Of 5 | Best OXVA Coils Resistance List

Three mesh coil options for the Xlim C. Each one changes how the device feels in use. If you have been running the coil that came in the box and wondering whether a different resistance would suit you better, a five-pack is the cheapest way to find out.

• 0.8 ohm: The daily driver. Balanced flavour and vapour at mid-range wattage. Handles nic salts at 10-20mg and 50/50 freebase cleanly. Where most Xlim C owners land

• 1.2 ohm: Gentle, cool MTL draw with minimal vapour. Runs nic salts at 20mg smoothly with barely any throat harshness. Best battery life of the three

• 0.6 ohm: Warmest option with the most cloud. Restricted DTL territory. Good for vapers who want the Xlim C to push a bit harder

How to Set Up the Oxva Xlim C Replacement Coils | Pack Of 5 | Best OXVA Coils

1. Remove the cartridge. Pull the Xlim C cartridge off the device.

2. Pull the old coil out. Grip the base of the used coil and pull it straight out of the bottom of the cartridge. No twisting needed.

3. Prime the new coil. Put two or three drops of e-liquid directly onto the cotton visible through the side ports of the new coil. This pre-saturates the wicking and protects against a dry first draw.

4. Push the new coil in. Align the fresh coil with the base of the cartridge and push firmly until it clicks into place. The press-fit design means there is only one correct orientation.

5. Fill the cartridge. Open the fill port on the cartridge and pour your nic salt or 50/50 e-liquid in up to the line. Close the port.

6. Wait. Let the filled cartridge sit for five minutes so the mesh coil wicking fully absorbs the liquid. This is important on every new coil, not just the first.

7. Reattach and vape. Push the cartridge back onto the Xlim C device. It should auto-detect the new coil resistance. Inhale to fire.

What's in the Oxva Xlim C Replacement Coils | Pack Of 5 | Best OXVA Coils Box

Five OXVA Xlim C mesh coils of the same resistance (0.6 ohm, 0.8 ohm, or 1.2 ohm depending on which pack you order). Each coil is individually sealed. No cartridges, no devices, no e-liquid included. These are replacement coils only. You need an OXVA Xlim C Cartridge and Xlim C Pod Kit to use them.

Built Exclusively for the OXVA Xlim C System

The Xlim C coils fit the OXVA Xlim C Cartridge, which goes with the OXVA Xlim C Pod Kit. That is the full list of compatible hardware. These coils do not cross with other OXVA devices or pod platforms.

Works with: The OXVA Xlim C Pod Kit and its dedicated Xlim C Cartridge. The press-fit connection is the same across all three coil resistances. Any Xlim C cartridge accepts any Xlim C coil.

Does not fit: The OXVA Xlim V2 (different pod and coil platform), the OXVA Xlim SQ (different coil fitting), the OXVA Xlim Pro (uses its own coil system), the OXVA Oneo (different platform), or any non-OXVA device. OXVA uses different coil families across their product range, so always check which coil your specific device needs before ordering.

About OXVA

OXVA launched in 2019 and built their name on the Xlim range, which became one of the best-selling MTL Pod Kit families in the UK market. The Xlim C is the latest addition, designed as a compact, budget-friendly entry point with replaceable mesh coils rather than disposable pod cartridges with built-in coils. 

Their coil technology focuses on mesh elements at lower wattages, which is less common than mesh in sub-ohm devices and gives the Xlim C range its clean flavour at MTL power levels. Browse the full OXVA Vapes collection at Pirate Vapes.

Stock Up and Save

Five coils per pack. At one to two weeks per coil with daily use, a single pack keeps you going for roughly five to ten weeks. Sweeter e-liquids will burn through them faster, so if you rotate between dessert and fruit flavours, having a backup pack on hand avoids that mid-week scramble when a coil starts tasting off.

At Pirate Vapes, we stock all three Xlim C resistances and pack every order with care. Every product is TPD compliant and sold through age-verified checkout. Same-day dispatch before 4pm. Free Pirate Post over £25.

Conclusion

The OXVA Xlim C coils give the Xlim C Pod Kit three genuinely different draw styles in one press-fit mesh coil family. The 0.8-ohm is an excellent daily MTL coil. The 1.2-ohm is one of the gentlest, coolest MTL options available.

The 0.6-ohm pushes the device into restricted DTL territory for vapers who want a bit more from a compact pod kit. All three are mesh, all three handle nic salts well, and the press-fit installation makes coil changes fast and clean.

If you own an Xlim C, these are the only coils that fit, and they are worth keeping stocked. Order from Pirate Vapes and browse our Replacement Coils collection and OXVA vapes range for compatible cartridges.

FAQs

Do these fit the OXVA Xlim V2 or Xlim Pro? 

No. The Xlim C coils only fit the OXVA Xlim C Cartridge. The Xlim V2, Xlim SQ, Xlim Pro, and Oneo all use different coil systems.

Which resistance should I start with? 

The 0.8-ohm. It is the most balanced option for daily MTL vaping and handles nic salts at 10-20mg well. If you want a cooler, gentler draw, try the 1.2-ohm. If you want more warmth and cloud, try the 0.6-ohm.

Can I use high VG e-liquid with these coils? 

Not ideal. All three resistances are designed for nic salts and 50/50 e-liquids. High VG (70/30 or thicker) is too viscous for the wicking ports and will cause dry hits, especially on the 1.2-ohm.

How do I install them? 

Pull the old coil out of the bottom of the Xlim C cartridge. Push the new one in until it clicks. No threading, no tools. Prime with a few drops of e-liquid before first use and wait five minutes.

Are all three coils mesh? 

Yes. The 0.6, 0.8, and 1.2-ohm Xlim C coils all use mesh heating elements. This is unusual at the 1.2-ohm level and contributes to cleaner flavour at low wattages.

Do I need to buy a separate cartridge? 

Only if your current cartridge is cracked or worn. The coils are replaceable inside the same Xlim C cartridge. You swap the coil, not the entire pod.