Sigelei M S Replacement Coils 

Three resistances. One coil platform. The Sigelei M S replacement coils are built around SS316L wire wrapped in organic cotton, and all three variants share the same press-fit base. You are picking between the MS 0.25ohm at 40-80W, the MS-H 0.2ohm that reaches 120W for a warmer draw, or the MS-M 0.2ohm mesh coil, which is honestly the standout of the range for flavour at 40-80W.

They fit across Sigelei's sub-ohm lineup, from the 80W Chronus Baby through to the full-size 200W kits. Five per box. Hologram sticker on the packaging for authenticity.

Why vapers choose the Sigelei M S Coils:

• 316L-grade steel wire heats more evenly than kanthal and holds up longer, which is something you actually feel after day three or four when cheaper coils start dropping off

• Cotton wicking (organic, not blended) saturates fast and does not leave that weird synthetic taste you get from some budget coils during the break-in period

• Three resistances in one family means you can switch your vaping style without hunting for a different coil brand or platform entirely

• Press-fit installation takes about ten seconds. No tools, no threading, no alignment

• Scratch-and-check hologram on the box so you can confirm what you have got is genuine Sigelei and not a knockoff

Sigelei M S Replacement Coils Features

Why SS316L Matters Here

Most budget coils use kanthal. Works fine, does the job. But 316L stainless steel handles heat more evenly and corrodes less. Practically speaking? Fewer dead spots across the surface, and your flavour stays closer to day-one quality for longer. If you have ever had a coil taste great on Monday and flat by Thursday, this is the material difference.

That Organic Cotton, Though

Sounds like a marketing line until you compare it to a synthetic wick side by side. The saturation is faster. The break-in taste disappears sooner. Thicker e-liquids do not gum up the ports as quickly either, which matters if you run 70VG or higher. Small detail, big difference over a full week.

Mesh Changes the Game at 0.2ohm

The MS-M uses a flat mesh strip instead of wound wire. More surface area touching liquid at once, which means faster ramp-up and denser vapour. Flavour clarity is noticeably better, especially with complex fruit or dessert profiles. Runs at 40-80W, so it is not pulling excessive power. Honestly, if you have not tried mesh in a Sigelei tank before, start here.

40W to 120W Without Changing Platform

Big range for a single coil system. The MS 0.25ohm and the mesh both live in the 40-80W zone. Want something warmer with real throat and proper cloud volume? The MS-H goes all the way to 120W. Same base, same tank, completely different vape. Not many coil families give you that kind of spread.

Scratch the Sticker, Know It Is Real

Counterfeit sub-ohm coils are a genuine problem when buying online. Sigelei puts a hologram and a scratchable code on every box. You scratch, you check, you know. More useful than it sounds when the alternative is finding out your coils are fakes after the first burnt hit.

Sigelei M S Replacement Coils Resistance Options

Three options. They are not interchangeable in terms of experience.

Start with the MS-M 0.2ohm mesh if flavour is your priority. Mesh heats liquid more evenly than wound wire ever can. You get more detail from complex profiles, fruit mixes especially, and it pairs well with 70/30 Shortfills or anything above 60VG. Comfortable at 40-80W.

Different story with the MS-H 0.2ohm. That one runs 60-120W. SS316L wire, warmer draw, thicker clouds. If you usually vape north of 80W, this is the only option in the range that keeps up. Not the coil for flavour subtlety, but if cloud volume and warmth are what you want, it delivers.

Then there is the MS 0.25ohm. Probably the easiest recommendation for someone who just wants a solid daily coil and does not want to overthink it. Sits at 40-80W, handles a wider range of e-liquid ratios, gives you a balanced mix of flavour and vapour. Nothing flashy. Just works.

• MS-M 0.2ohm (Mesh): Flavour-focused, 40-80W

• MS-H 0.2ohm (SS316L): Warm clouds, 60-120W

• MS 0.25ohm (SS316L): Balanced daily driver, 40-80W

How to Set Up the Sigelei M S Replacement Coils

Straightforward swap. A couple of minutes if you include the priming wait.

1. Remove the old coil from your tank base. Depending on your Sigelei model, that is either unscrewing or a straight pull downward. Empty the tank first.

2. Take a fresh coil from the pack. Before fitting it, put three to four drops of e-liquid directly onto the exposed cotton. Hit both the side ports and the top opening.

3. Press the new coil into the base until it sits flush. You will feel it click or seat firmly.

4. Reassemble the tank and fill with e-liquid up to the fill line.

5. Leave the tank standing upright for a good seven minutes. Let the cotton absorb the liquid fully before you take your first draw. Rushing this step risks scorching the wick, which ruins an otherwise perfectly good coil.

6. Start vaping at the lower end of the recommended wattage and bring it up gradually over a handful of puffs.

What's in the Sigelei M S Replacement Coils Box

Five coils in your selected resistance, sealed inside an outer box. Sigelei includes a hologram authenticity sticker and a scratch-panel verification code on the packaging. No e-liquid, no tank, no spare parts. Just the coils.

Built for Sigelei's Sub-Ohm Tank Range

These coils work with a specific group of Sigelei Vape Tanks and Vape Kits. No cross-brand compatibility here.

Starting at the top, both the Chronus 200W and Shikra 200W use these coils. Step down, and the Sobra 198W and KAOS Vapsoon 208W take them too. For the compact option, the Chronus Baby 80W is also a direct fit. 

Beyond the kits themselves, the coils work with the Sobra Mini tank that ships inside the Sibra F and Sibra E2 kits, and the Moonshot 120 tank from the original Sobra Kit.

Own one of those? Drop-in fit. Nothing to modify. But if your device is not on that list, do not buy these expecting them to work. They will not. All three resistance options are available at Pirate Vapes with same-day dispatch on orders placed before 4 pm.

About Sigelei

Sigelei showed up early in the regulated mod scene. While most of the UK market was still figuring out sub-ohm vaping, Sigelei was already putting out devices that pushed serious wattage without feeling like a gamble every time you pressed the fire button. 

The Chronus and Shikra kits landed well with people who wanted proper power but did not need the complexity of a full hobbyist box mod. Fair enough. That is a useful spot in the market.

The M S coil platform exists because of that philosophy: build one coil system that works across several kits rather than fragmenting it. Smaller brand than SMOK or Geekvape in the UK now, sure. But the sub-ohm gear still performs.

Stock Up and Save

Five coils last roughly two to three weeks depending on how much you vape and what kind of liquid you use. Sweeter juices burn through cotton faster. That is just how it goes. Keeping a spare pack around means you are never stuck nursing a dying coil on a Wednesday night waiting for post that is not coming until Friday.

Every order from Pirate Vapes ships in padded, secure packaging, so coils arrive in proper condition. All products are TPD compliant and sold to over-18s only through age-verified checkout. Free Pirate Post on orders over £25.

Conclusion

Reliable sub-ohm coils from a brand that has been at this for a while now. The MS-M mesh gives the best flavour of the three, and it is not even close. The MS-H handles high wattage properly.

The MS 0.25ohm just works, day in and day out. If you have got a Sigelei sub-ohm kit sat on the desk, whether that is a Chronus or a KAOS Vapsoon or anything in between, these coils are a direct fit. Browse more Vape Accessories or check out the full range at Pirate Vapes.

FAQs

How long do the Sigelei M S coils last?

Depends on your usage. A moderate daily vaper gets one to two weeks from a single coil. Chain vaping or sweet liquids will cut that shorter, sometimes by half. You will know when it is time because the flavour goes flat or you catch a faint charred note on the exhale.

Which M S coil gives the best flavour?

MS-M 0.2ohm mesh. Not close.

What wattage should I run these at?

MS 0.25ohm and MS-M 0.2ohm both work between 40 and 80W. The MS-H 0.2ohm runs 60-120W for warmer vapour and bigger clouds. Start low with a fresh coil every time.

Do the M S coils fit the Chronus Baby?

Yes. All three resistance options work with it. The Chronus Baby takes the same M S coil base as every other Sigelei kit in the range, so the 80W version is no different from the full-size models in terms of coil compatibility.

What kind of e-liquid should I pair with these?

High VG, 70/30 or above, works best across all three resistances. The MS-M and MS-H handle thick juice without issue because of the wider wicking ports. The MS 0.25ohm is more flexible and sits fine with 60/40 blends too, which gives you a touch more throat hit if that is what you prefer.

Can I use temperature control with the SS316L coils?

SS316L supports TC mode on devices that offer it. The thing is, not every Sigelei kit in the compatible range actually has a TC setting. Check your device first. In standard wattage mode, these coils work perfectly well regardless.