Smok IPX80 Replacement Pods

Smok IPX80 Replacement Pods

A 2ml refillable pod built specifically for the SMOK IPX80 pod kit, taking the RPM 2 coil range. Side-fill through a silicone-stoppered port, so there is no popping the whole pod apart just to top up. Press-fit coil installation means the coil clicks straight into the base without threading.

Runs on either the 0.6ohm DC MTL coil for a tighter, cigarette-style draw or the 0.16ohm mesh coil for warmer, cloudier pulls, both sold separately. If your original IPX80 pod has cracked, clouded over, or just won't seal properly any more, this is the direct replacement.

Why vapers choose this:

• Side-fill design means topping up takes seconds, no fiddly top-cap to wrestle with, and the silicone stopper seals tight enough to survive a jacket pocket

• Genuine RPM 2 fitment, so it clicks into the SMOK IPX80 the way it's meant to, first time

• Works with two coil resistances from the same pod, which covers both MTL and warmer DTL-leaning styles

• Press-fit coil installation takes the guesswork out of swaps. No threading, no cross-fitting a coil at an angle

• A spare pod in the drawer means one crack or leak doesn't take your whole IPX80 out of action

Smok IPX80 Replacement Pods Features

Built with a Practical Side-Fill

The fill port sits on the side of the pod, sealed with a silicone stopper. Pull it back, fill, and push it home. No top cap to lose, and no juice running down the device because you rushed a refill on the way out the door. It is a small design choice that makes daily use much cleaner.

Two Coils, One Pod. Genuinely Useful?

Fair enough if that sounds like a small thing. It is not. The same pod body accepts both the 0.6ohm DC MTL coil and the 0.16ohm mesh coil, so switching your draw style doesn't mean buying a new pod every time. Restricted MTL one week, warmer mesh the next. One pod handles both.

Press-Fit, Not Threaded

RPM 2 coils drop into the base and lock with a firm push. That is it. No cross-threading a coil at 11 pm with the lights off, no stripped threads after six months of daily swaps. Press-fit coil installation is simply less that can go wrong.

The Silicone Stopper Actually Seals

Cheaper refillable pods leak from the fill port within a few refills. SMOK's silicone stopper on this pod holds its seal noticeably longer, which matters more than it sounds like it should when the pod is riding around in a bag next to your phone.

A Direct Fit, Not a Universal One

This pod is built for the SMOK IPX80 specifically. It does not fit the standard RPM pod kits, the RPM40, or any of SMOK's Nord-series devices. If you're not certain which device you're running, check the model printed on the base of your kit before ordering.

Smok IPX80 Replacement Pods Compatible Coil Options

Two coils fit this pod, and the right one depends entirely on how you like to draw.

• 0.6ohm DC MTL: Tighter draw, 12–25W, best with nic salts

• 0.16ohm Mesh: Warmer draw, 25–50W, better with 50/50 or high-VG liquid

How to Set Up the Smok IPX80 Replacement Pods

Straightforward swap. A couple of minutes, most of it spent waiting.

1. Remove the empty or damaged pod from the IPX80 by pulling it straight up out of the device.

2. Take your chosen RPM 2 coil and press it firmly into the base of the new pod until it clicks into place.

3. Peel back the silicone stopper on the side of the pod and fill with your e-liquid, keeping clear of the central airflow tube.

4. Push the stopper back down to seal the fill port properly.

5. Let the coil rest for six minutes before your first draw, giving the cotton time to fully soak through.

6. Insert the pod into the device and start at the low end of the coil's rated wattage, increasing gradually from there.

What's in the Smok IPX80 Replacement Pods Box

The empty replacement pod, or pods depending on the pack size selected at checkout. No coil included, no e-liquid, and no device. This is a pod-only replacement, so make sure you have RPM 2 coils and your preferred e-liquid ready before it arrives.

Built Specifically for the SMOK IPX80 Pod Kit

This pod is a direct fit for the SMOK IPX80, and nothing else. It slots into the IPX80's pod bay and locks in exactly the way the original included pod did, taking the full RPM 2 Coils range.

What it does not fit: the original RPM pod kit, the RPM40, RPM100, or any SMOK Nord device. Each of those runs a different pod shape and a different coil platform entirely. If your device isn't an IPX80, this pod will not seat correctly, so it's worth double-checking the model before you add it to your basket.

About SMOK

SMOK has spent over a decade building some of the most widely used pod and coil platforms in vaping, and the RPM series is one of the reasons why. Rather than locking every device into its own proprietary pod, SMOK built the RPM and RPM 2 ranges to work across multiple kits, which is exactly why the IPX80 uses the same coil family as several other SMOK devices.

That cross-compatibility keeps ongoing running costs down and means coils are rarely hard to find. The IPX80 itself leans into SMOK's more rugged, outdoor-oriented design language, and this pod is built to match: sealed, refillable, and straightforward to maintain.

Stock Up and Save

One pod is fine until it isn't, and a cracked or leaking pod with no spare on hand means your IPX80 is out of action until the next order lands. Picking up a spare pod alongside a couple of RPM 2 coils covers you for months, not days.

Every order from Pirate Vapes ships the same day before 4 pm in padded packaging, with an age-verified checkout and full TPD compliance on every listing. Over 18s only. Free Pirate Post on orders over £40.

Conclusion

The Smok IPX80 Replacement Pods are a simple, direct fix for a device that otherwise stops working the moment its pod fails. Side-fill convenience, press-fit coils, and compatibility with both the 0.6ohm MTL and 0.16ohm mesh options mean one pod covers two very different vaping styles.

If your IPX80's original pod has seen better days, this is the exact replacement it needs. Browse the full range of SMOK Vapes and Vape Coils to build a proper spares kit, or head back to Pirate Vapes to see what else is in stock.

FAQs

Does the pod come with a coil?

No. This is a pod-only replacement. You'll need to pick up 0.6ohm DC MTL or 0.16ohm mesh RPM 2 coils separately.

Will this pod fit my SMOK RPM40?

No, these pods do not fit the SMOK RPM40.

How much e-liquid does the pod hold?

2ml, in line with UK regulations. It's a refillable pod, so you can top it up as many times as you like once it's empty.

Which coil should I pick for nic salts?

The 0.6ohm DC MTL coil. It's built for a tighter draw and pairs well with higher-strength nic salts.

How long does the silicone stopper last before it needs replacing?

Most vapers get many months of daily refills before the seal starts to loosen. If it stops sealing properly, replace the pod rather than the whole device.

Can I use this pod with mesh and MTL coils at the same time?

Not simultaneously, but you can swap between the two coil types in the same pod whenever you like, so long as you give the new coil time to soak before vaping.