SMOK RPM 100 Vape Kit

SMOK RPM 100 Vape Kit

100W of adjustable power from a pod you can refill, running on a battery you can swap in seconds. The SMOK RPM 100 is a pod mod: a proper chipset, a 0.96-inch colour screen and full wattage control wrapped around a 2ml top-fill pod. It takes a single 18650 or 21700 cell, so a flat battery becomes a fresh one without waiting on a charger.

Two RPM 3 mesh coils come in the box for warm, dense sub-ohm clouds. If you want mod-level vapour with pod-level convenience, this is one of the more capable Vape Kits at the price.

Why vapers choose this:

• Removable battery, zero downtime. A charged spare 21700 in your pocket means you swap and carry on instead of tethering to a cable for an hour.

• Real wattage control from 5 to 100W with a clear colour screen, so you set the vape rather than accept whatever a fixed device hands you.

• RPM 3 mesh coils in two resistances are included, ready for warm sub-ohm clouds straight away.

• A 2ml sliding top-fill pod refills without unscrewing anything.

• The wider RPM coil range sits behind it, so you can retune the draw as your taste shifts.

SMOK RPM 100 Features

One Battery, Swapped in Seconds

The RPM 100 runs on a single 21700 for the longest life, or an 18650 using the adapter that ships in the base. Thing is, the removable cell is the whole appeal: carry a charged spare and a flat battery costs you ten seconds, not an hour on charge. Grab a spare quality cell from the Vape Batteries range, and you are never caught out.

Why a Colour Screen Matters

The 0.96-inch TFT display is not decoration. It shows wattage, resistance, battery level and puff data at a glance, so you can see exactly what the coil is doing and dial the power in. On a device that swings from 5W to 100W, that feedback is the gap between a great vape and a burnt one.

Sub-Ohm Clouds From the Included Coils

Both bundled coils are RPM 3 mesh. The 0.15Ω is the cloud-and-flavour coil, happiest around 40 to 80W for a warm direct-lung hit. The 0.23Ω runs a touch tighter and cooler, and it is easier on the battery. Mesh heats evenly across a wide surface, so flavour holds up deeper into each pod.

Fill It Without Unscrewing Anything

The pod uses a sliding top cap. Push it open, add your liquid, slide it shut. A child-resistant catch locks the coil in place, which keeps it seated and cuts down on leaks. Fair enough, most sub-ohm kits leak eventually. This one manages it better than most.

Airflow With No Steps

The airflow is a stepless ring, not a row of notches. Roll it fully open for maximum air on the 0.15Ω, or close it in for a warmer, denser restricted-lung pull. You settle it exactly where you want rather than picking the nearest preset.

Which E-Liquid Suits the RPM 100

Out of the box, this is a sub-ohm, direct-lung kit, so the coils want thick juice. Reach for a High VG E-Liquid, a 70VG blend or higher, at a low strength of 3 to 6mg. Thin liquid floods a 0.15Ω coil and spits back at you.

If you later fit an RPM 2 pod with a higher-resistance coil for a tighter draw, switch to a 50/50 or a stronger Nic Salts instead. Match the liquid to the coil, and it behaves.

SMOK RPM 100 Colours

Five matte finishes, all on the zinc-alloy body.

#buttons

• Matte 7 Colour Plating
• Matte-Gunmetal
• Matte-Gold
• Matte-Blue
• Matte-Red

How to Set Up the SMOK RPM 100

1. Open the base and fit a charged 21700, or an 18650 inside the supplied adapter, lining up the polarity marks.

2. Check the preinstalled 0.15Ω coil is pressed firmly up into the pod.

3. Slide the top cap back and fill with a 70VG e-liquid, keeping clear of the central airflow tube.

4. Let it stand upright for a good ten minutes so the mesh drinks its fill before you fire it.

5. Click the fire button five times to wake it, set the wattage to around 40W, and build up from there.

6. Adjust the airflow ring to taste, then vape.

Getting the Best From It

• Use good-quality cells rated for the current draw, and never fire a battery with a torn or damaged wrap.

• Refill before the pod runs low, since a dry mesh coil scorches fast.

• Stay inside the coil's wattage band, as pushing the 0.15Ω too hard shortens its life.

• Let the wick recover between draws rather than chain vaping.

• Wipe the pod contacts now and then to keep firing consistent.

What's in the SMOK RPM 100 Box

• The RPM 100 mod

• One 2ml RPM 100 pod (RPM 3 fitment)

• One RPM 3 0.15Ω mesh coil and one RPM 3 0.23Ω mesh coil

• An 18650 battery adapter, a USB-C cable, and a manual

No battery and no e-liquid are included, so add a cell and a bottle of liquid to your first order.

Which Coils and Pods Fit the RPM 100

This is the part to get right. The pod in the box is the RPM 3 pod, and it takes only RPM 3 coils, including the two supplied. Fit the separate RPM 2 pod and the device opens up to the full RPM 2 coil range, from mesh sub-ohm options up to higher-resistance coils for a tighter draw.

The catch: RPM 2 coils do not fit the RPM 3 pod, and older standard RPM or Nord coils fit neither. Match the coil series to the pod it belongs to. Pirate Vapes lists the SMOK Coils and Replacement Pods you will need to keep it running.

About SMOK

SMOK is one of the biggest names in vape hardware, and the RPM line, short for Real Pod Mod, is where the brand blends pod convenience with mod power. The RPM 100 carries that idea up to a full 100W on an external battery.

What keeps the platform strong is the coil ecosystem: the RPM 2 and RPM 3 ranges cover everything from tight restricted draws to big sub-ohm clouds, so a single device can change character with a fresh coil and pod. It is dependable, widely stocked, and easy to live with.

Stock Up and Save

An external-battery mod is only as good as the cell inside it, so order a spare 21700 or 18650 alongside the kit, and you will never be caught with a flat battery and no charger to hand.

Pirate Vapes dispatches every order the same day before 4 pm, packed to protect the hardware. All stock is TPD compliant, age-verified at checkout, and over-18s only. Free Pirate Post applies over £40.

Conclusion

The SMOK RPM 100 gives you mod-level power in a refillable pod, with a colour screen, a swappable battery and the wide RPM coil range behind it. Out of the box, it is a warm, cloudy sub-ohm kit, and it flexes to a tighter draw with an RPM 2 pod.

Just remember the battery is sold separately. If you want a genuine step up from a simple pod device, it is one of the stronger Refillable Pod Kits around. Head back to Pirate Vapes to add a cell and finish your order.

FAQs

Does the RPM 100 come with a battery?

No. It needs a single 21700, or an 18650 with the included adapter, bought separately. Without a cell, it will not fire.

Which coils fit the RPM 100?

RPM 3 coils in the supplied pod. Fit the separate RPM 2 pod, and RPM 2 coils work too. RPM 2 coils will not fit the RPM 3 pod.

Is the RPM 100 MTL or DTL?

Out of the box, restricted and direct lung on the sub-ohm RPM 3 coils. For a tight MTL draw, use an RPM 2 pod with a higher-resistance coil.

How much does the RPM 100 pod hold?

The UK pod holds 2ml. A 6ml version exists in non-UK markets. Both fill through the sliding top cap.

What e-liquid should I use with the RPM 100?

A 70VG shortfill at 3 to 6mg for the included coils. Only move to 50/50 or nic salts if you fit a higher-resistance RPM 2 coil.

Why does the RPM 100 taste burnt?

Usually a coil fires dry or runs too hot. Prime new coils for ten minutes, refill before the pod empties, and keep the 0.15Ω inside its wattage band.