SMOK RPM 25W Replacement Pods

SMOK RPM 25W Replacement Pods

A 2ml refillable cartridge built for one device and one device only: the SMOK RPM 25W pod kit. This is the empty pod, not a prefilled one, so you drop in an LP1 coil, fill it with your own e-liquid, and go. The clear PCTG shell lets you watch your liquid level drop, a side port with a silicone bung handles refills, and the pod clicks onto the device with magnets.

Coils are sold separately. If your original cartridge has clouded, cracked, or started to weep at the seams, a fresh three-pack is the cheap fix. Browse more Replacement Pods if you run other kits too.

Why vapers choose this:

• A genuine 2ml refillable means you top up with any 50/50 or nic salt you fancy instead of paying prefilled-pod prices every couple of days, and over a month that gap in cost is not small.

• The clear PCTG body shows your liquid level at a glance, so you refill before a dry hit wrecks the coil rather than after.

• Magnetic fitment clicks on and off in a second, with no threads to cross.

• Press-fit LP1 coils drop straight into the base, and because the coil is separate, you can change draw style without buying a new pod.

• Adjustable airflow built into the pod lets you tune from a tight MTL pull to something a touch airier, handy when you are stepping down nicotine strength.

SMOK RPM 25W Replacement Pod Features

The Pod Holds 2ml. That Is the UK Limit.

Every refillable pod sold here caps at 2ml, and this one is no exception. That is the legal ceiling for UK cartridges, so do not expect a bigger tank hiding anywhere. What you get instead is a compact pod that tops up in seconds. For a daily MTL vaper, 2ml of nic salt is roughly a day's worth.

Running Low? You Will See It Coming.

The shell is moulded from PCTG, a semi-clear plastic that lets light through. You can read how much liquid is left without pulling the pod off the device. Thing is, dry firing an LP1 coil kills it quickly, so being able to glance down and refill in time genuinely saves you money on coils.

A Simple Side Fill With a Silicone Bung

Refilling is a side job, not a top job. Ease back the silicone bung on the flank of the pod, angle your nozzle in, and fill to just under the line. Keep clear of the central airflow tube. Then push the bung back until it seats flush. Most leaks people pin on the pod are really a bung left half-open.

Match It With the Right LP1 Coil

The pod is only half the setup. It runs the LP1 coil series, which press straight into the base. The RPM 25W kit ships with an LP1 Meshed 0.9ohm MTL coil, a solid all-rounder for salts. Keep spares from the Vape Coils range so a burnt coil never leaves you waiting.

Airflow You Can Actually Adjust

The pod carries its own airflow ring that spins a full turn. Nudge it tighter for a cigarette-style MTL draw, or crack it open for a softer, airier pull. Small feature, fair enough, but it means one pod covers a couple of different moods without swapping hardware around.

SMOK RPM 25W Pod LP1 Coil Options

Because the pod ships empty, the coil you pair with it decides how the whole thing vapes. They all come from SMOK's LP1 line, they all press-fit, and they all lean MTL. Here is the short version.

Most popular is the LP1 Meshed 0.9ohm MTL coil. It is the one bundled with the kit, sits happiest at around 17W, and handles nic salts cleanly with a warm, steady draw. Want something tighter and better suited to stronger salts? A 1.2ohm LP1 coil restricts the draw further and sips liquid more slowly. Prefer a bit more warmth and vapour instead? A lower-resistance LP1 mesh option around 0.8ohm pushes a little harder. Pick up LP1 SMOK Coils separately and keep a couple spare.

#buttons

• LP1 Meshed 0.9ohm
• LP1 1.2ohm
• LP1 0.8ohm mesh

How to Set Up the SMOK RPM 25W Pod

Under two minutes, start to finish.

1. Lift the old pod straight off the device. It releases from the magnets with a gentle pull.

2. Press a fresh LP1 coil into the base of the pod until it clicks, then drip two or three drops of e-liquid onto the exposed cotton.

3. Ease back the silicone bung on the side and tilt your nic salt in slowly, stopping just below the fill line.

4. Seat the bung firmly back into the port until it sits flush.

5. Stand the pod upright for a full six minutes so the cotton draws the liquid all the way through before you fire it.

6. Clip the pod on and start around 12 to 15W, then work up to taste.

What's in the SMOK RPM 25W Pod Box

Three empty RPM 25W pods, and that is it deliberately. No coils are fitted, so you will need LP1 coils to go alongside them. There is no e-liquid and no device in the pack either. This is a straight replacement cartridge for people who already own the kit.

Built Only for the SMOK RPM 25W Pod Kit

This cartridge fits one kit. The RPM 25W, and nothing else in the RPM family. It is easy to assume any RPM pod cross-fits, but they do not. It will not seat in the RPM 40. It will not run on the RPM 80 or RPM 80 Pro. The Nord pods are a different platform again.

 If your device says RPM 25W on it and takes LP1 coils, you are in the right place. Match it with other Refillable Pod Kits only where they are explicitly LP1-based, and owners of other MTL Vape Kits should check their own pod range instead.

About SMOK

SMOK has been building pod and mod hardware since 2010, and the RPM line is one of its longest-running pod families. The RPM 25W sits at the compact, MTL-focused end of that range, paired with the LP1 coil platform rather than the older RPM coils.

LP1 was designed around press-fit installation and leak resistance, with the coil sealing into a dedicated pod like this one. It is a mature, well-supported system, which is part of why replacement pods and coils for it stay easy to find, and Pirate Vapes keeps the pods and LP1 coils stocked side by side.

Stock Up and Save

Pods are wear items. The plastic clouds, the seals soften, and eventually the flavour drops off no matter how carefully you look after them. Keeping a spare three-pack in the drawer means a tired cartridge never stops your day.

Every order from Pirate Vapes ships same day when it is placed before 4 pm, packed to survive the post. Checkout is age-verified, over-18s only, and all stock is TPD compliant. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

The RPM 25W pod is a simple, sensible replacement part. If your kit's original cartridge has clouded or started leaking, a fresh three-pack and a new LP1 coil brings it back to how it vaped on day one; just remember the coils come separately.

Stock up on the LP1 you need, grab any spare Vape Accessories while you are at it, and browse the wider pod and coil range at Pirate Vapes.

FAQs

Which device does the RPM 25W pod fit?

Only the SMOK RPM 25W kit. Not the RPM 40, not the RPM 80, not the Nord series. Same brand, different pod platforms.

Does the RPM 25W pod come with a coil?

No. It is an empty cartridge. You add an LP1 coil separately.

What size is the RPM 25W pod?

2ml, the UK limit. You refill it by hand through the side port with whatever e-liquid you like.

Can I use nic salts in the RPM 25W pod?

Yes, and honestly that is what it suits best. Pair a higher-resistance LP1 coil with a 10mg or 20mg nic salt for a smooth MTL hit. Freebase works too if you want a bigger cloud.

How long does the RPM 25W pod last before it needs replacing?

Depends how hard you run it. Most people get a few weeks from one before the plastic clouds or the seal tears. Sweet, dark liquids shorten that. A three-pack keeps you covered for a good while.

How many RPM 25W pods come in a pack?

Three. Enough to rotate through without reordering every week.