SMOK RPM 4 Pod Vape Kit

SMOK RPM 4 Pod Vape Kit

60W output from a 1650mAh built-in battery, wrapped in a compact 103mm zinc-alloy shell. The SMOK RPM 4 Pod Vape Kit sits in the middle of SMOK's pod-kit line: more punch than a Novo, more pocketable than a Fetch Pro, refillable with any TPD-compliant e-liquid. Two 2ml refillable pods ship in the box, each backed by a different coil family.

The 0.4ohm RPM Mesh covers restricted direct lung, and the 0.23ohm LP2 Mesh opens up for warm cloud production. Slots neatly into our Refillable Pod Kits shelf for anyone stepping up from a basic starter kit.

Why vapers choose this:

• Two coil platforms in one kit. RPM pod for the entire RPM coil range, LP2 pod for the newer LP2 series. Different mesh geometries, different draws, same device.

• 60W peak from a built-in cell. No batteries to buy, no external chargers, just USB-C when it needs topping up.

• Stepless airflow control. Slide left for open DL, slide right for a tighter RDL, and every position in between is available.

• 0.96" colour TFT with adjustable UI. Wattage, resistance, voltage, puff counter, battery voltage. Six background colours if you want to fiddle with it.

• Leak-resistant refill port with silicone stopper. Fills from the side, seals firmly, no drip tip to remove.

SMOK RPM 4 Kit Features

LP2 Mesh Coil

SMOK dropped the LP2 platform as a lower-profile evolution of the RPM series, using a shorter coil body and refined mesh geometry. The 0.23ohm LP2 mesh coil pre-installed in the LP2 pod is rated for 20W to 45W. It produces dense, warm direct-lung vapour and rich flavour from your favourite high-VG shortfills. Pair it with a 70/30 Shortfill, and it becomes the reason to own this kit.

RPM Pod and Coils

Because SMOK's RPM coil range is enormous, and this pod plugs into every one of them. The included 0.4ohm RPM Mesh coil is rated for 25W and pairs well with 50/50 e-liquids or nic salts. You can also swap in coils like the 0.6ohm RPM Triple or 1.0ohm RPM SC for cooler, restricted draws. One pod, multiple coil identities.

1650mAh Battery and Type-C Charging

Not so big that it becomes a mod, not so small that you charge it three times a day. 1650mAh at 60W realistically means most of a day for moderate use, or half a day if you're chain-hitting the LP2 pod at full wattage. Type-C fast charging pulls up to 1.5A, which puts a full recharge inside an hour.

Colour TFT Screen

Six adjustable background colours, clean numeric display, and buttons that click properly rather than mush. The screen shows current wattage, coil resistance, puff counter, battery voltage, and output voltage. Not the most beautiful display SMOK have ever shipped, but honestly? It's the most functional in this price bracket.

Side-Fill 2ml Pods

Lift the silicone stopper on the side of the pod, drop the nozzle of your e-liquid bottle in, squeeze, replug. No unscrewing, no drip tip removal, no priming ritual beyond the initial coil install. Both 2ml pods fill identically. The magnetic pod-to-mod connection means putting it back is idiot-proof.

SMOK RPM 4 Colours

Ten finishes are stocked, split between metallic gloss and stitched leather-effect panels. Availability rotates, so check the store picker for what is live:

#buttons

• Black
• Black Leather
• Blue Leather
• Brown Leather
• Pale Champagne
• Pink Cyan
• Red Leather
• Rose Gold
• Silver Blue
• Silver Red

How to Set Up the SMOK RPM 4

Under two minutes from box to first pull.

1. Lift the pod out of the top slot and separate it from the mod.

2. Prime the coil with 5 to 6 drops of e-liquid directly into the exposed cotton wicking cutouts on the base of the pod.

3. Refit the pod into the magnetic top slot and let the four magnets pull it home. It clicks flush when properly seated.

4. Fill the 2ml pod through the side port with 50/50 for the RPM coil or a 70/30 shortfill for the LP2 coil.

5. Stand the kit on its side for a full 6 minutes so the mesh fully saturates through both wicking ports.

6. Press the fire button five times to power on, then start at low wattage (around 15W for the RPM, 30W for the LP2) and step up until the draw feels right.

What's in the SMOK RPM 4 Box

Inside, you get the RPM 4 device with its built-in 1650mAh battery, one 2ml RPM 4 pod with the 0.4ohm RPM mesh coil pre-installed, one 2ml LP2 pod with the 0.23ohm LP2 mesh coil pre-installed, a Type-C charging cable, and the user manual.

No e-liquid is included, and no wall adapter ships with the kit. Age verification applies at checkout.

Cross-Compatibility With the SMOK RPM and LP2 Coil Range

The RPM pod accepts the full RPM coil family, which SMOK have been iterating on since 2019. That includes the 0.4ohm RPM Mesh (pre-installed), the 0.6ohm RPM Triple coil, the 0.8ohm RPM DC MTL coil, and the 1.0ohm RPM SC for tight restricted draws. The LP2 pod is dedicated to the smaller LP2 coil range only, currently the 0.23ohm mesh and the 0.6ohm DC. Restocking either family from the same brand catalogue keeps things simple.

What does not fit: Novo pods, Nord 2 pods, RPM 2 or RPM 5 coils, or anything from the Fetch series. Similar-looking connectors do not guarantee a proper fit.

About SMOK

The RPM 4 is a mid-generation evolution of SMOK's flagship pod platform, best understood as the moment they added the LP2 coil family without breaking backwards compatibility with the RPM range. That matters because anyone who already uses original RPM coils can drop straight into this kit without wasting their spare pods or coils.

The internal chipset is also worth noting, delivering an instant 0.001s firing speed for fast vapour response, and the puff-to-cloud response feels closer to a proper box mod than most compact pod kits manage.

Stock Up and Save

The most useful upgrade path for an RPM 4 owner is a fresh coil rotation rather than a spare device. Grab a five-pack of LP2 mesh coils for the cloud pod, a five-pack of RPM coils in whichever resistance suits your style, and a bottle each of high-VG shortfill and 50/50 Nic Salts to keep both pods happy.

Pirate Vapes ships every kit through age-verified checkout, TPD-compliant across the range, with same-day dispatch on orders placed before 4 pm. Over-18s only, and all pods sold conform to the UK 2ml legal cap.

Conclusion

The SMOK RPM 4 Pod Vape Kit puts 60W of real output, dual pod-coil compatibility, and a stepless airflow slider into a proper pocket-friendly frame.

Ideal for vapers who want mod-adjacent flexibility without a mod-sized device, and for anyone already invested in SMOK's coil ecosystem. Browse compatible spares in the Vape Accessories collection, or explore the wider range at Pirate Vapes.

FAQs

Does the RPM 4 use MTL or DL coils?

Both, depending on which coil you fit. The two coils in the box are DL and RDL. MTL requires a separate RPM coil purchase, like the 1.0ohm SC.

Can I use nic salts?

Yes. Nic salts work well in the RPM pod with the 0.4ohm mesh at lower wattage. Not ideal in the LP2 pod, which is built for high-VG juice.

How long does the battery last?

Depends on the coil and wattage. Heavy LP2 use at 40W to 45W drains the 1650mAh cell in roughly half a day. Light RPM use at 25W stretches it to a full day.

Can I use both pods on the same device?

Yes. Swap freely between the RPM and LP2 pods. The magnetic connection is universal.

Is the RPM 4 refillable in the UK?

Yes. It is a TPD-compliant refillable pod kit with a 2ml pod cap.

Does it support pass-through charging?

Yes, you can vape while it charges via the Type-C port.