Smok RPM40 Standard Pods

Smok RPM40 Standard Pods

Two pod formats, one device. The Smok RPM40 Standard & Nord Pods are the refillable cartridges built for the Smok RPM40 kit, and the choice between them comes down to which coil family you run. The RPM Standard Pod takes Smok's RPM coil range, while the RPM Nord Pod takes Nord coils, and both use a side-fill system with a silicone stopper to keep refills mess-free.

Pack of three. Bottom coil installation, no tools required. Whether you are running a tight MTL setup or pushing towards a warmer DTL draw, the coil you fit decides the style, and the pod just needs to be the right shape for it.

Why vapers choose this:

• Two coil families in one device. Swap between the RPM Standard Pod and the RPM Nord Pod depending on whether you want RPM coils or Nord coils fitted, without buying a second kit.

• Side-fill design cuts the mess down. The silicone stopper seals properly, and refilling takes seconds once you have done it once or twice.

• Bottom coil installation is simple. Push the coil in, click the pod into the device, done.

• Works across VG ratios. High VG and high PG liquids both run fine, so nic salts and freebase are both on the table.

• A pack of three means you are never stuck. Pods do wear out, and having spares on hand avoids a gap in your vaping while you wait on a reorder.

Smok RPM40 Pods Features

Bottom Coil, No Fuss

The coil pushes into the base of the pod from underneath. No threading, no twisting, no guesswork about whether it has seated correctly. Push firmly until it clicks and you are set. This is the same fitting method Smok has used across most of the RPM range, so if you have owned an earlier Smok pod device, this will feel familiar straight away.

Which Pod Actually Matters More Than It Looks

The RPM Standard Pod and the RPM Nord Pod look similar side by side, but they are not interchangeable in terms of coil fit. Get the wrong one and your coil simply will not seat. Standard Pod for RPM coils, Nord Pod for Nord coils. Worth double-checking which coil you already own before you order.

Side Fill That Actually Seals

Older pod systems used a plug that worked loose over time and started to weep liquid from the seam. The silicone stopper on these pods sits tighter, and the fill port is positioned away from the airflow channel, so liquid stays where it should. Not a leak-proof guarantee (nothing is), but a noticeably tighter seal than the pods this replaced.

One Device, Two Vaping Styles

Fit an RPM coil (such as the 0.4ohm mesh) to lean into a warmer, airier DTL vape with dense clouds. Fit a Nord coil if you prefer a tighter, more classic MTL draw with higher resistance. You can pick from the wider Vape Coils range. The pod acts as the vessel, while your coil selection tailors the exact draw.

Built for Daily Use, Not Just Occasional Top-Ups

Pod shells crack, stoppers perish, and coil housings wear out with repeated use. A three-pack means you are covered for the next few months of regular refilling rather than reordering every few weeks. Keep one as backup in a drawer, and you will not be caught out mid-week.

Smok RPM40 Pods Options

Select the pod that matches your coil family and preferred capacity:

#buttons

• RPM Nord Pod 2ml
• RPM Nord Pod 4.5ml
• RPM Standard Pod 4.3ml

If you are stocking up on more than one pack, browse the wider refills and pods range for other compatible options.

How to Set Up the Smok RPM40 Pods

Quick swap. A couple of minutes from empty pod to first vape.

1. Pull the empty pod straight out of the RPM40 device.

2. Push the coil out from the bottom of the old pod and set it aside.

3. Fit your chosen coil into the base of the replacement pod, whether that is an RPM coil for the Standard Pod or a Nord coil for the Nord Pod. Push until it clicks into place.

4. Open the silicone stopper on the side of the pod and fill with your e-liquid, leaving a small air gap at the top. Do not overfill.

5. Let the coil settle for seven to eight minutes before your first draw, giving the wick time to fully saturate.

6. Click the pod back into the device and start on a low setting before building up.

What's in the Smok RPM40 Standard & Nord Pods Box

Three pods per pack, either all Standard or all Nord depending on which you order. No coils included, no device, no e-liquid. This is a pod-only pack, so make sure you already have compatible coils on hand before it arrives.

Made for the Smok RPM40, Nothing Else

These pods are built specifically for the Smok RPM40 kit and are not designed to fit other Smok devices, even ones that look similar from the outside. If your device is an RPM40, either pod option will click straight in.

What they do not fit: the RPM4, RPM100, RPM2, or any of Smok's Nord-branded standalone kits. Each of those runs its own pod shape, even where the coil compatibility overlaps on paper. Check your device model before ordering to avoid a pod that will not seat.

About Smok

Smok built the RPM series around one idea: let vapers switch coil types without switching devices. The RPM40 was one of the first kits to properly commit to that, offering both RPM and Nord pod compatibility from a single mod rather than locking owners into one coil family.

That flexibility is why the platform has stuck around, and why replacement pods for it are still in steady demand years after launch. For UK vapers who already own coils from either range, it means the device adapts rather than the other way round.

Stock Up and Save

Pods do not last forever, and running out mid-week with a full bottle of e-liquid and nothing to put it in is a familiar frustration. A spare pack sitting in a drawer solves that before it happens.

Every order from Pirate Vapes ships same-day before 4 pm in padded packaging, so pods arrive intact rather than rattling around loose. All stock across our TPD-Compliant Vapes range meets current UK regulation, with an age-verified checkout and sales restricted to over 18s only.

Conclusion

The Smok RPM40 Standard & Nord Pods keep an already flexible device running exactly the way you want it. Pick the Standard Pod for RPM coils or the Nord Pod for Nord coils, fit your coil of choice, and you have got both MTL and DTL options from the same kit.

A three-pack covers you for months, and the side-fill design means less mess than older-style pods. If your RPM40 is due a refresh, browse the full range of Vape Accessories alongside these pods at Pirate Vapes.

FAQs

Which pod fits my coils?

RPM coils go in the RPM Standard Pod. Nord coils go in the RPM Nord Pod. Check the coil packaging if you are not sure which range you own.

Do these fit any other Smok device?

No. Built for the RPM40 only.

Can I use nic salts in these pods?

Yes, alongside freebase and shortfill liquids. Both high VG and high PG blends work, so the choice comes down to the coil fitted rather than the pod itself.

How much can I fill the pod with?

It depends on the size you choose. The RPM Standard holds up to 4.3ml, the larger RPM Nord holds up to 4.5ml, and the 2ml Nord edition holds 2ml. Always leave a tiny air gap at the top to prevent pressure leaks.

Do the pods come with coils included?

No. Pods only. Coils are sold separately in the RPM and Nord ranges.

How often do these pods need replacing?

Most vapers get a few weeks of regular use before the stopper or seal starts to wear. Having a spare pack on hand avoids a gap between old and new.