SMOK TFV16 Lite Vape Tank 

Two mesh coils, one seriously capable sub-ohm tank. The SMOK TFV16 Lite pairs a 0.2ohm conical mesh coil for warm, flavour-forward hits with a 0.15ohm dual mesh coil for bigger clouds, both powered by SMOK's nexMesh heating technology.

At 28mm x 58.5mm it is a compact take on the full-size TFV16, built from stainless steel with reinforced glass and a gold-plated 510 connection for reliable conductivity on any box mod. 

This UK listing ships as a 2ml TPD-compliant tank, with a bulb glass upgrade available separately for markets outside the UK's capacity limit. Best suited to direct-lung vapers who already run High VG E-Liquid at 60W and above.

Why vapers choose this:

• nexMesh coil technology on both included coils delivers faster heat-up and noticeably richer flavour than standard round-wire builds

• Two coil options in the box. The 0.2ohm for a warmer throat hit, the 0.15ohm dual mesh for maximum vapour, no need to buy a separate pack to try both styles

• Gold-plated 510 connection improves conductivity and works cleanly across most variable wattage box mods

• Locking top-fill cap keeps the fill port secure during transport, reducing the leaking that plagues cheaper sliding designs

• Compact for a sub-ohm tank. 28mm diameter and 58.5mm height mean it does not overhang most 60-90W dual-battery mods

SMOK TFV16 Lite 2ml Vape Tank Features

Conical Mesh, Built for Flavour First

The pre-installed 0.2ohm coil uses SMOK's nexMesh technology in a conical shape, which concentrates airflow through the mesh before it reaches the drip tip. The result is a punchier, warmer throat hit alongside genuinely strong flavour output. Rated for 60 to 85W, it is the coil most vapers will settle on for everyday use.

Dual Mesh for Cloud Chasers

Swap to the 0.15ohm dual mesh coil and the tank shifts towards cloud production. Two mesh holes heat more evenly than a single element, which means less scorched cotton and a smoother pull even at the top of its 60-90W range. Worth trying if flavour intensity matters less to you than vapour volume.

A 510 Connection That Actually Performs

Gold conducts better than the standard brass or steel pins found on cheaper tanks. On the TFV16 Lite that translates into more consistent power delivery from your mod, less resistance fluctuation, and a connection that holds up over months of daily swapping between devices. Small detail, real difference.

Fill Port That Locks Shut

Sub-ohm tanks live or die on their fill mechanism, and SMOK moved the gasket to the base of the cap here specifically to cut down on leaking. The locking button keeps the port sealed when you are not actively refilling, which matters if this tank is riding in a bag rather than sitting on a desk.

Adjustable Airflow at the Base

The dual slotted airflow ring sits low on the tank body, out of the way of your fingers during a draw. Open it fully for maximum cloud production, or close it down slightly to tighten the pull and intensify flavour. Either coil responds well to a bit of experimentation here.

SMOK TFV16 Lite 2ml Vape Tank Colours

Three finishes, same stainless steel body underneath. Pick based on what matches your mod rather than performance, since the tank behaves identically across all three.

#buttons

• Gold
• Silver
• Purple

How to Set Up the SMOK TFV16 Lite 2ml Vape Tank

Plug-and-play coils. A few minutes from box to first draw.

1. Unlock and open the top cap using the swing mechanism to expose the fill ports.

2. Fill with high VG e-liquid, keeping clear of the central chimney, up to just below the max fill line.

3. Close and lock the top cap to seal the tank before use.

4. If swapping coils, unscrew the base, press the new mesh coil firmly into place, then reattach the base.

5. Let the coil rest for roughly six minutes with the tank upright before firing, giving the mesh time to fully saturate.

6. Start your mod at the lower end of the coil's wattage range and increase gradually until the flavour and vapour balance suits you.

What's in the SMOK TFV16 Lite 2ml Vape Tank Box

One TFV16 Lite tank with the 0.2ohm conical mesh coil pre-installed, a spare 0.15ohm dual mesh coil, a spare glass tube, a small pack of spare seals, and an instruction manual. No mod, no e-liquid, no charger.

Built for High-Wattage Box Mods and DTL Vaping

The TFV16 Lite connects via standard 510 threading, so it fits the vast majority of variable wattage box mods on the market, provided the device can comfortably run 60W or higher. This is a direct-lung tank through and through: both coils sit well below 1ohm, and pairing them with anything other than high VG e-liquid will produce dry, unpleasant hits.

It is not built for MTL vaping and will not suit low-wattage pen-style devices. If you are coming from an MTL Pod Kit, this tank is a different category of device entirely, and the Vape Tanks collection has gentler DTL options if 60W feels like a big jump.

About SMOK

SMOK has been one of the dominant names in sub-ohm hardware for the better part of a decade, and the TFV line is where that reputation was largely built. The TFV16 Lite takes the flavour and cloud performance of the full-size TFV16 and puts it into a smaller, lighter body without cutting corners on the coil technology. nexMesh has become something of a SMOK signature across their tank range, and the TFV16 Lite is one of the more compact ways to experience it.

Stock Up and Save

Mesh coils on sub-ohm tanks wear faster than MTL coils simply because they are running at higher wattage more often. Grabbing a spare pack alongside the tank means you are not waiting on a delivery when flavour starts to fade.

Every order from Pirate Vapes ships the same day before 4pm in padded packaging, with an age-verified checkout throughout. All stock is TPD compliant and restricted to over-18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The TFV16 Lite gives sub-ohm vapers genuine flexibility from a single tank: warm flavour-led hits from the conical mesh, big clouds from the dual mesh, and a locking fill system that actually keeps leaks under control. It is compact for what it delivers, the gold-plated connection is a small but real upgrade, and three colourways mean it will match most setups.

If you are running a 60W-plus box mod and want a proper direct-lung tank without the bulk of the full-size TFV16, this is worth a look. Browse the full SMOK Range, pick up spare Vape Coils, and check out Pirate Vapes for everything else you need to keep it running.

FAQs

Is the TFV16 Lite suitable for beginners?

Not really. Both coils are sub-ohm and built for direct-lung vaping at 60W or above. First-time vapers are generally better suited to an MTL pod kit.

What e-liquid should I use?

High VG, ideally 70/30 or higher. Freebase or 50/50 liquid will not wick properly through either mesh coil.

Can I get more than 2ml of capacity?

A 5ml bulb glass is available separately in some markets, though UK stock ships at the 2ml TPD-compliant capacity as standard.

Which coil should I start with?

The 0.2ohm conical mesh for a warmer, more flavour-focused draw. Move to the 0.15ohm dual mesh once you want bigger clouds.

How long do the mesh coils last?

Typically one to two weeks with regular use, depending on how often you vape and which e-liquid you run through it.