SMOK Vape Pen V2 Replacement Coils

SMOK Vape Pen V2 Replacement Coils

Sub-ohm heads for a pen that punches above its size. The SMOK Vape Pen V2 Replacement Coils come five to a pack and cover two very different draws: a 0.15ohm mesh coil built for warm direct-lung clouds at 30 to 50W, and a 0.6ohm dual coil for a tighter, lower-power vape at 12 to 25W.

Both wick on organic cotton and screw into the same Vape Pen tank base. Pick your resistance by the vape you want, keep a pack spare, and your Vape Pen keeps tasting right. Reorder from our Vape Coils section whenever the flavour dips.

Why vapers choose this:

• Two draws from one tank. The 0.15ohm mesh throws warm DTL clouds, while the 0.6ohm dual coil pulls the draw in tighter at lower power. Same base, two moods, no new hardware.

• Mesh heats evenly across a wide surface, so flavour lands cleaner and the coil holds its taste longer.

• Organic cotton wicking keeps the first fills tasting fresh.

• Five per pack, which covers most vapers for a few weeks.

• Cross-fits the older Vape Pen 22 and the standalone Vape Pen Tank, handy if you run more than one.

SMOK Vape Pen V2 Coil Features

Mesh Changes the Ramp

The 0.15ohm head uses a mesh strip rather than a round wire, and the difference shows on the pull. A wider heating area means the coil fires faster and spreads heat evenly across the cotton, so you get warm vapour and sharp flavour almost instantly. Run it between 30 and 50W for the sweet spot. This is the cloud coil.

Want a Tighter Vape Instead?

Drop in the 0.6ohm dual coil and the whole character shifts. Rated 12 to 25W, it pulls the draw in toward a restricted direct-lung hit with a fuller, denser flavour at lower power. Better on battery, gentler on liquid, and the pick if you are not chasing big clouds. Honestly, it is worth owning both.

Built for High-VG Liquid

Sub-ohm coils drink thicker juice. The 0.15ohm mesh in particular wants a 70/30 or higher-VG shortfill to wick properly and stay cool, which you can browse in our 70/30 Shortfills. Feed it thin 50/50 at high wattage and the cotton dries out and burns. Match the liquid to the coil, and it lasts far longer.

One Tank, Two Styles of Vaping

Because both coils seat in the same base, the Vape Pen tank becomes two devices in one. Cloud chaser by day on the mesh, tighter and quieter in the evening on the dual coil. That flexibility is the whole appeal of a sub-ohm pen, and it pairs neatly with the wider range of Sub-Ohm DTL Tanks.

SMOK Vape Pen V2 Coil Resistance Options

Two heads in the range, and they vape nothing alike. Pick by how much cloud and throat feel you want.

Most popular: the 0.15ohm mesh. It is the reason people buy a Vape Pen in the first place. Warm, voluminous direct-lung clouds and clean flavour from 30 to 50W, best fed a high-VG shortfill at 3mg or 6mg nicotine. Start here if you want the full sub-ohm experience.

The tighter option: the 0.6ohm dual coil. A more restricted draw at 12 to 25W, easier on the battery and happy with a 50/50 or higher-PG blend at lower strength. It gives a denser, warmer flavour without the big cloud, which suits quieter vaping.

#buttons

• 0.15ohm Mesh
• 0.6ohm DC

How to Set Up the SMOK Vape Pen V2 Coils

A couple of minutes, plus a soak. Do not rush the soak on a sub-ohm coil.

1. Twist off the top cap and carefully remove the glass tube over a sink or tissue, as any remaining e-liquid will spill out. (Do not try to unscrew the battery base, as it is permanently fixed).

2. Unscrew the spent coil anti-clockwise from the integrated battery base and dispose of it.

3. Drip four to five drops of e-liquid onto the exposed cotton ports of the fresh coil, since a low-resistance mesh head needs thorough priming.

4. Screw the new coil clockwise tightly into the battery base, then slide the glass tube back down over the coil so it seats securely on the bottom o-ring.

5. Fill the tank with your chosen liquid, screw the top cap back on, and leave it upright for a good eight to ten minutes so the cotton saturates fully. Firing a dry sub-ohm coil ruins it on the first pull.

6. Hold the fire button to vape. The Vape Pen V2 sets the power automatically, so there is no wattage to adjust.

What's in the SMOK Vape Pen V2 Coil Box

Five coils in your selected resistance, and nothing else. No tank, no device, no e-liquid. Just the heads, so you will need your existing Vape Pen tank and a bottle of the right liquid to go with them.

The Coil for SMOK's Vape Pen Series

These heads belong to SMOK's Vape Pen coil family, so fitment reaches beyond the V2. The Vape Pen V2 Kit takes them, and so does the older Vape Pen 22 Kit and the standalone Vape Pen Tank. If your tank came off any of those, you are in the right place. Find matching hardware among our Vape Tanks.

What they will not fit is the rest of SMOK's catalogue. Not the TFV cloud tanks. Not the Nord or RPM pod systems. Not the Novo line either. Each of those runs its own coil platform, so check the wording on your current coil before ordering.

About SMOK

SMOK built the Vape Pen line as the simple entry into sub-ohm vaping: a slim pen battery, a matching tank, and cloud-ready coils, with none of the menu-driven complexity of a box mod.

The V2 refined that formula with a bigger battery and the mesh coil that made the range popular. Where much of SMOK's catalogue chases high-power cloud tanks, the Vape Pen stays deliberately straightforward, which is why it remains a common first sub-ohm kit in UK shops and why these coils keep selling.

Stock Up and Save

The smart move with this tank is keeping both resistances in the drawer. A pack of the 0.15ohm mesh for cloud days and a pack of the 0.6ohm dual coil for tighter evenings means you switch styles in under a minute without waiting on a delivery.

Group a few packs through our Plunder Packs and the per-coil price drops. Every order from Pirate Vapes ships age-verified, over 18s only, in padded packaging. Free Pirate Post lands on orders over £40.

Conclusion

The SMOK Vape Pen V2 Replacement Coils turn one simple pen into two vapes: warm direct-lung clouds on the 0.15ohm mesh, or a tighter, lower-power draw on the 0.6ohm dual coil.

Five to a pack, organic cotton wicking, and cross-fitment with the Vape Pen 22 and Vape Pen Tank make them an easy, cheap way to keep a sub-ohm pen performing. Match the coil to your liquid, and they last. Reorder coils and Vape Accessories or explore the full lineup at Pirate Vapes.

FAQs

Which Vape Pen V2 coil should I start with?

The 0.15ohm mesh for warm DTL clouds, or the 0.6ohm dual coil for a tighter, lower-power draw. Most vapers keep both and switch as the mood takes them.

Can I use nic salts in Vape Pen V2 coils?

Not the strong ones. Both coils are sub-ohm, so 20mg salts run harsh. Keep nicotine low, around 3mg to 6mg, especially on the mesh.

What e-liquid suits the Vape Pen V2 mesh coil?

A high-VG 70/30 shortfill. Thin 50/50 at 30 to 50W dries the cotton out and burns the coil.

Do the Vape Pen V2 coils fit the older Vape Pen 22?

Yes. The same Vape Pen coil series fits the Vape Pen V2, the Vape Pen 22, and the Vape Pen Tank. It does not fit TFV, Nord, RPM, or Novo hardware.

How long does a Vape Pen V2 coil last?

Roughly one to three weeks each, so a five-pack often covers a month or more. Dark, sweet liquids gunk the mesh faster and shorten that.

How many Vape Pen V2 coils come in a pack?

Five, in whichever single resistance you choose.