SMOK Arcfox Vape Kit

SMOK Arcfox Vape Kit

Up to 230W from a mod you could drop in a puddle and keep vaping. The SMOK Arcfox is a rugged, IP67-rated dual 18650 box mod built for sub-ohm clouds, paired in the UK with a 2ml TPD-compliant top-fill tank.

It runs VW and TC modes through a 0.96-inch TFT screen, charges over USB-C, and takes a 510 connection so it works with a wide range of sub-ohm tanks. This is a proper power Sub-Ohm Vape Kit for experienced DTL vapers who want durability and output in one unit. Batteries are sold separately. Over 18s only.

Why vapers choose this:

• IP67 durability is the headline. This is one of the very few mods rated to survive water immersion, dust and drops, which makes it a rare fit for building sites, festivals and anyone who is hard on their gear.

• 230W of output from two removable 18650s, so power tops up in seconds with a spare pair.

• 510 connection means you are not tied to the included tank.

• Top-fill 2ml tank with a press-and-slide port for quick, tidy refills.

• A clear TFT screen and simple button layout that keeps wattage, mode, and battery life in view.

SMOK Arcfox Vape Kit Features

Built to Take a Beating

The IP67 rating is the reason to buy this over a standard mod. The zinc alloy frame is wrapped in leather and non-slip silicone, sealed against dust and water, and rated to survive a metre of immersion for half an hour. Drop it, spill on it, take it outdoors in the rain. It keeps going where most mods would not.

Removable Batteries, Instant Power

No waiting around for a dead device. The Arcfox runs on two 18650 Batteries that you charge externally or over USB-C. Carry a charged spare pair, and you swap them in seconds, which beats being tethered to a wall for anyone who vapes heavily or is out all day. Always use a matched, married pair from the same brand.

While the USB-C port supports 2.0A charging for on-the-go top-ups, using a dedicated external battery charger is always recommended to preserve the life and safety of your 18650 cells.

230W Across VW and TC

Power is handled through the TFT screen and two adjustment buttons. VW mode gives you the full 5W to 230W for cloud production, while TC mode keeps a mesh coil's temperature steady and caps at 80W. For most sub-ohm setups, you will sit comfortably in VW with a High-VG E-Liquid and enjoy dense, warm vapour.

Top-Fill Without the Mess

The included 2ml tank uses SMOK's press-and-slide top cap. Press the button, twist the cap aside, and the fill port opens. No unscrewing, no drips down the side. It runs SMOK's mesh coil series, which heats fast and evenly for the bold flavour the TFV tanks are known for.

One Kit, Many Tanks

Because the mod uses a standard 510 connection, it is not locked to the tank in the box. Fancy a different atomiser down the line? Screw on another sub-ohm tank or a rebuildable and the Arcfox will drive it happily up to 230W. That flexibility is part of why box mods still hold their own against sealed pod kits.

SMOK Arcfox Vape Kit Colours

SMOK produces the Arcfox in six finishes, from loud to understated, all over the same rugged tri-proof body.

#buttons

• Bright Black
• Prism Blue
• Prism Gold
• Prism Gunmetal
• Prism Rainbow
• Prism Red

How to Set Up the SMOK Arcfox Vape Kit

A little more involved than a pod kit, but nothing tricky. Take your time with the batteries.

1. Insert two charged 18650 batteries, matching the plus and minus markings inside the door. Use a matched pair from the same brand, bought together and cycled together.

2. Unscrew the tank from the base and lift the top cap using the press-and-slide button.

3. Add a few drops directly onto the exposed cotton ports of the coil before you do anything else.

4. Fill the tank with a high-VG e-liquid through the top port, then close the cap.

5. Let it stand for a full ten minutes so the larger cotton wicks in a sub-ohm coil saturate completely. Firing early scorches the coil, and there is no coming back from that taste.

6. Set a low wattage first, take a couple of gentle draws, then climb towards the coil's sweet spot in small steps.

What's in the SMOK Arcfox Vape Kit Box

You get:

• the Arcfox mod,

• the 2ml TPD-compliant tank,

• two SMOK mesh coils,

• a spare Replacement Glass,

• a USB-C cable,

• spare parts

• and the user manual.

There is no e-liquid included, and crucially the two 18650 batteries are not supplied, so order those alongside the kit if you do not already have a pair.

The Tri-Proof SMOK Mod for Sub-Ohm Vaping

The Arcfox pairs a high-output mod with SMOK's TFV tank platform, and the mod's 510 connection opens it up well beyond the tank in the box. It will drive most sub-ohm tanks and rebuildable atomisers, and the included tank takes SMOK's widely stocked mesh Replacement Coils.

What it is not is an MTL beginner device. The lowest useful setting still produces a warm, airy direct-lung draw, and it needs sub-ohm coils and high-VG liquid to perform. If you want a tight, cigarette-style vape, this is the wrong tool. If you want power and toughness, it is very much the right one.

About SMOK

SMOK made its name on high-power mods and the TFV tank series that pairs with them, and the Arcfox sits firmly in that lineage. The difference here is the tri-proof shell: an IP67 build that pushes the same 230W performance into a body designed to survive real-world abuse.

The TFV tank platform behind it is one of the most widely supported in vaping, which keeps mesh coils easy to source years after a kit launches. For a rugged, no-nonsense sub-ohm setup, SMOK's engineering is hard to fault.

Stock Up and Save

A box mod kit is only half a setup on its own. To vape it you will need a matched pair of 18650s, a bottle of high-VG liquid, and a couple of spare mesh coils, since sub-ohm coils at high wattage wear faster than pod coils. Getting all of it in one order saves you a second delivery.

Pirate Vapes ships the same day before 4 pm in padded packaging, with age-verified checkout and over-18s-only sales. All stock is TPD compliant, and Free Pirate Post applies over £40.

Conclusion

The SMOK Arcfox is a rugged, high-output sub-ohm kit for experienced vapers who want power and durability in equal measure: 230W, dual removable batteries, an IP67 tri-proof body and a 2ml TPD tank that fills from the top.

It is overkill for a first device, but ideal if you chase clouds and are rough on your kit. Browse the full SMOK Range, grab the Vape Accessories to complete the setup, or head back to Pirate Vapes for the rest of the shelf.

FAQs

Does the Arcfox Vape Kit come with batteries?

No. It needs two 18650 batteries, sold separately. Always use a matched pair from the same brand, charged and cycled together.

How big is the Arcfox Vape Kit tank?

The UK kit ships with a 2ml TPD-compliant tank. The international Arcfox comes with a larger 7.5ml TFV-Mini V2 tank, but that capacity is not sold in the UK.

Is the Arcfox Vape Kit good for beginners?

Not really. It is a sub-ohm cloud device that needs high-VG liquid and some knowledge of battery safety. A pod kit is a better first step.

What power should I run the Arcfox Vape Kit at?

Depends on the coil, but most SMOK mesh coils sit best between 60W and 110W. Start low and work up.

Is the Arcfox Vape Kit actually waterproof?

Yes, to the IP67 standard: rated for dust, drops and immersion in up to a metre of water for 30 minutes. It is one of the toughest mods around.

What tanks fit the Arcfox Vape Kit?

Any 510 sub-ohm tank or rebuildable. You are not limited to the included tank, which is part of the appeal of a box mod.