SXmini PureMax Replacement Pods

SXmini PureMax Replacement Pods

One pod, three ways to vape it. The SXmini PureMax replacement pods carry a fixed mesh coil in 0.6 ohm, 0.8 ohm, or 1.2 ohm, so the same device can run warm and airy or tight and cool. Each holds 2ml, fills from a side port sealed with zero-leak silicone, and drops into the PureMax with a magnetic click.

Best fed with 50% PG juice like nic salts or 50/50 E-Liquid. Sold in packs of two with the coil built in, so when it fades you fit a fresh pod rather than a fresh coil. Pick your resistance and go.

Why vapers choose these:

• Three resistances, one pod family. Run 0.6 ohm for airy RDL, 1.2 ohm for a tight MTL pull, or 0.8 ohm to split the difference, all in the same PureMax with no new hardware.

• Fixed mesh coil. The SS316L mesh heats evenly for cleaner flavour and steadier vapour than round-wire heads.

• Zero-leak silicone. The seal keeps liquid off your pocket and away from the airflow.

• Fits any 510 drip tip. Change the mouthpiece for one you actually like.

• Two per pack. A spare always ready when the first one tires.

SXmini PureMax Replacement Pods Features

The Point of Three Resistances

Most pods lock you into one draw. This family does not. Fancy dense clouds and a looser pull? The 0.6 ohm at 18 to 25W delivers. Want a cigarette-tight MTL hit for nic salts? Drop to the 1.2 ohm at 12 to 15W. The 0.8 ohm covers the middle. One device, three moods.

Why Fixed Mesh Beats a Round Coil

Mesh has more surface area, so it heats evenly and wicks steadily instead of forming scorching hot spots. The result is cleaner flavour and vapour that stays consistent from a full pod down to an empty one. The coil is sealed in, so when it finally tires, you fit a fresh pod rather than fiddling with a new coil head.

Temperature Kept in Check

The PureMax system these pods are built for keeps a constant eye on coil temperature, reading it many times a second to head off the harsh, burnt taste of an overheating coil. In practice, that means fewer dry hits and a coil that tends to last, provided you prime it properly and keep it topped up.

Bring Your Own Mouthpiece

Here is a nice touch. The pod takes any standard 510 drip tip, so you are not stuck with whatever came in the box. Prefer a wide bore for airflow or a narrow one for a tighter draw? Fit it. Browse the Drip Tips And Mouthpieces if you want to change the feel.

Made for Thinner Liquids

These pods want 50% PG e-liquid. Nic salts and 50/50 blends wick cleanly through the mesh and give you the best flavour with the least risk of dry hits. Thick high-VG shortfills are the wrong match, since the wicking ports cannot pull them fast enough. Stick to 10ml Nic Salts, and you are set.

SXmini PureMax Replacement Pods Resistance Options

Three in the picker, all fixed mesh, all in the same 2ml pod. The choice comes down to draw style and wattage.

The all-rounder: the 0.8 ohm. Run between 15 and 20W, it handles a gentle restricted direct-lung draw and a firmer MTL pull without committing to either. If you are not sure which to pick, start here.

For MTL and nic salts: the 1.2 ohm. The highest resistance, happiest at 12 to 15W, giving a cooler, tighter cigarette-style draw. This is the pick for Nic Salts and anyone new to refillables, and the one most of the Pirate Vapes crew reach for.

For vapour and a warmer hit: the 0.6 ohm. The lowest resistance, run at 18 to 25W for restricted direct-lung vaping with more warmth and cloud. Best kept to lower-strength liquid.

#buttons

• 0.6 ohm
• 0.8 ohm
• 1.2 ohm

How to Set Up the SXmini PureMax Pods

Barely a job at all.

1. Take a fresh pod out and find the side fill port under its silicone flap.

2. Ease the flap open and drip your nic salt or 50/50 liquid in, keeping clear of the central airflow tube.

3. Fill to just below the 2ml line, then press the flap firmly shut.

4. Wipe any excess from the outside of the pod.

5. Stand it up and let the mesh drink for the best part of ten minutes before the first draw. Fire it dry, and the coil scorches, and there is no coming back from that.

6. Push the pod into the PureMax until the magnets grab, then take a couple of soft draws to finish priming.

What's in the SXmini PureMax Pods Box

Two PureMax pods in your chosen resistance, each with the mesh coil already built in. No e-liquid, no device, and no loose coils, since the coil is sealed into the pod. If you do not own the PureMax yet, you will need the kit before these are any use.

Made Only for the SXmini PureMax Pod Kit

These pods fit one device family: the SXmini PureMax. They drop into the original PureMax, the PureMax V2, and the PureMax Q. The fitment and the way the pod works with the device's temperature control are specific to this system, so treat them as PureMax-only. After the kit itself, browse Refillable Pod Kits for other refillable options, or the wider MTL Vape Kits range.

About SXmini

SXmini is the pod-and-mod arm of YiHi, a manufacturer that made its name building high-end chipsets for advanced mods. That engineering focus carries into the PureMax line, where the headline trick is coil-temperature monitoring that works to stop burnt hits before they happen.

Where a lot of pod brands compete purely on price, SXmini leans on chip smarts and build quality. The PureMax pods are the consumable side of that system, keeping a fairly sophisticated little device running the way it should.

Stock Up and Save

Two pods a pack means one in the device and one waiting, which is about as often as you want a spare on hand. If you run more than one resistance, keeping a pack of each saves swapping blind when a coil dulls. Line a few up through our Plunder Packs and the price per pod drops.

Every order from Pirate Vapes ships same day before 4 pm in padded packaging. TPD compliant, age-verified checkout, over-18s only. Free Pirate Post over £40.

Conclusion

The SXmini PureMax pods are a smart match for a smart little device: one 2ml pod family in 0.6 ohm, 0.8 ohm and 1.2 ohm, so a single PureMax can go from airy RDL to tight MTL just by switching pods. Fixed mesh coils, a zero-leak fill, 510 drip-tip compatibility, and temperature-monitored coils round it off.

Fill with 50% PG juice, prime it well, and it performs. Grab a pack, plus more Vape Accessories, at Pirate Vapes.

FAQs

Which PureMax pod resistance is best for nic salts?

The 1.2 ohm. It runs at a lower wattage for a cooler, tighter MTL draw that suits higher-strength nic salts and newer vapers.

Can I use PureMax pods with another device?

No. They are built only for the SXmini PureMax and PureMax V2. They will not fit other kits.

What capacity are PureMax pods?

2ml each, in line with UK TPD rules. Some non-UK versions run a larger capacity, but UK pods are 2ml.

Can I replace just the PureMax pod coil?

No. The mesh coil is fixed inside the pod. When flavour drops, or it tastes burnt, you fit a fresh pod.

What e-liquid should I use with PureMax pods?

A 50% PG blend. Nic salts or 50/50 wick best through the mesh. High-VG shortfills are too thick and risk dry hits.

Do PureMax pods really not leak?

The zero-leak silicone seal is built to stop it. Fill and close the port properly, and you should stay dry. Overfilling past the line is the usual culprit when pods do weep.