Uwell Caliburn G2 Coil 1.2Ohm Mesh Coils

Uwell Caliburn G2 Coil 1.2Ohm Mesh Coils

A tight, flavour-focused mouth-to-lung coil for the Caliburn G platform, sold as a pack of replacement heads. The Uwell Caliburn G2 1.2ohm coils use a FeCrAl UN2 mesh element wrapped in organic cotton, tuned by Uwell's Pro-FOCS flavour technology for a clean, consistent draw.

Rated for 9W to 13W, the 1.2ohm resistance gives a snug MTL pull that suits nic salts and 50/50 e-liquids perfectly. Installation is press-fit, so a fresh coil clicks straight in with no screwing and no mess. Keep a pack Qspare so a worn coil never interrupts your day. Browse the full Uwell Coils range at Pirate Vapes.

Why vapers choose these:

• Genuine Uwell Caliburn G2 coils built for a tight, satisfying MTL draw.

• UN2 mesh with Pro-FOCS for even heating and clean, accurate flavour deep into the coil's life.

• Press-fit fitting that swaps in seconds with no tools and no mess.

• Wide device support across the Caliburn G coil platform, so one coil covers several kits.

Who the Uwell Caliburn G2 Coil 1.2Ohm Coil Is For

It performs best with 50/50 e-liquids and nic salts, which is exactly where higher-nicotine, ex-disposable and MTL vapers tend to sit.

Because it is rated for a modest 9W to 13W, it delivers a smooth, highly pronounced flavour without draining your battery or burning through juice too quickly. Pair it with a smooth nic salts blend for the best throat hit and the longest coil life.

Uwell Caliburn G2 Coil Features

Mesh Coil for Better Flavour

Each coil runs a FeCrAl UN2 mesh element rather than old round wire. Mesh spreads heat across a wider surface for a quick ramp-up and steady flavour, while Uwell's Pro-FOCS technology and organic cotton keep the taste clean and the wicking fast. The result is a coil that holds its flavour well rather than fading early.

Easy Push-Fit Coil Replacement

The Caliburn G coils are press-fit, so a coil pushes straight into the pod with no threads to line up. Pull the old one out, press the new one in until it seats securely, and you are done. No tools, no leaks, minimal downtime.

Compatible Devices

Never assume a coil fits. These Uwell Caliburn G2 1.2ohm coils sit on the Caliburn G coil platform and are confirmed for the following:

• Caliburn G,

• Caliburn G2,

• Caliburn GK2,

• Caliburn GZ2,

• Caliburn X,

• Caliburn KOKO Prime,

• Caliburn Explorer,

• Caliburn Tenet,

• Caliburn Tenet Koko,

• and Ironfist L.

One important note: while the coils cross over many devices, each device still needs its own matching pod, so a Caliburn G2 needs a G2 pod even though it shares the coil.

They do not fit the newer Caliburn G3 or GK3, which use a different cartridge system, and they will not fit non-Caliburn devices. Stock up on matching Replacement Pods and browse compatible MTL Vape Kits at Pirate Vapes.

How to Fit the Uwell Caliburn G2 Coil

Quick and clean once you have done it.

1. Remove the pod from your Caliburn device and empty any remaining e-liquid.

2. Pull the old coil straight out of the pod base. It releases without unscrewing.

3. Prime the new coil by dripping a drop or two of e-liquid straight down the centre hole directly onto the internal mesh, and a drop onto each of the exposed outer cotton ports.

4. Look at the base of the new coil and find the flat edge. Align this flat edge with the matching flat edge on the pod's insertion hole, and press the coil in firmly until it sits completely flush. (If it is not flush, it will leak.)

5. Refit and fill the pod, then leave it to stand upright for five to ten minutes so the internal cotton saturates fully.

6. Vape as normal. Proper priming is the single best way to avoid burning a fresh coil.

What's in the Uwell Caliburn G2 Coil 1.2Ohm Mesh Coils Pack

Four (4) genuine Uwell Caliburn G2 1.2ohm replacement coils. No pod or device is included, since these are replacement coils for a Caliburn kit you already own.

About Uwell

Uwell built its reputation on the Caliburn range, one of the most popular pod families in UK vaping thanks to a rare balance of flavour, simplicity and reliability. The Caliburn G coil platform is a big part of that: a single mesh coil family, powered by Pro-FOCS flavour technology, that carries across a whole generation of Caliburn devices.

It means vapers can upgrade their kit without abandoning a coil system that already works for them, which is exactly why these coils stay in steady demand.

Stock Up and Save

Coils are a consumable, so buying a pack and keeping a spare in the drawer is simply how you run any refillable pod kit without interruption. Pirate Vapes dispatches every order the same day before 4 pm, and regulars can top up through

The Crow's Nest so fresh coils turn up before the old one burns out. Every coil is a genuine Uwell part, sold through an age-verified, over-18s checkout. Weigh it against other Multi-Buy Vape Deals before you order.

Conclusion

The Uwell Caliburn G2 1.2ohm Mesh Coils are the straightforward refill for anyone running a Caliburn G, G2 or compatible kit who prefers a tight MTL draw.

You get genuine mesh coils with Pro-FOCS flavour, wide device support across the Caliburn G platform, and a press-fit design that makes swaps painless.

Match them to a 50/50 or nic salt e-liquid, keep a pack in reserve, and your kit keeps performing. Head back to Pirate Vapes for the wider range.

FAQs

What draw style does the Caliburn G2 Coil 1.2Ohm coil give?

A tight mouth-to-lung draw, closest to a cigarette-style pull, with cooler vapour and strong flavour rather than big clouds.

Which e-liquids work best with the Caliburn G2 Coil 1.2Ohm coils?

50/50 e-liquids and nic salts. Higher-PG and salt blends give the best flavour and the longest coil life at this resistance.

Which devices do Caliburn G2 Coil 1.2Ohm coils fit?

The Caliburn G coil platform: Caliburn G, G2, GK2, GZ2, X, KOKO Prime, Explorer, Tenet, Tenet Koko and Ironfist L. Each still needs its own matching pod.

Do Caliburn G2 Coil 1.2Ohm coil fit the Caliburn G3?

No. The Caliburn G3 and GK3 use a different cartridge system and are not compatible with these coils.

Do Caliburn G2 Coil 1.2Ohm coil need screwing in?

No. The Caliburn G coils are press-fit. Push the coil in until it seats securely, and it locks into the pod.

How long does a Caliburn G2 Coil 1.2Ohm coil last?

Usually around one to two weeks, depending on wattage, e-liquid and how often you vape. A burnt taste or weaker vapour means it is time to swap.