Vaporesso Gen Air 40 Pod Kit

Vaporesso Gen Air 40 Pod Kit

At 67g, the Gen Air 40 is the lightest 40W pod kit on the shelf, and it earns that headline beyond the number. Inside the zinc-alloy body sits an 1800mAh battery, a Type-C port, and Vaporesso's AXON chip driving output from 5W to 40W. Two GTX mesh coils come in the box, so you can run a tight MTL draw or a looser RDL one from day one.

The 2ml refillable pod fills from the side and uses SSS leak resistance to keep juice off the battery. A proper all-rounder, and one of the more sensible Refillable Pod Kits for anyone stepping up from a disposable.

Why vapers choose this:

• Lightest 40W pod going at 67g so it vanishes in a pocket without giving up power, which is a rare trade to actually get right.

• Two coils in the box means you test both MTL and RDL before spending another penny.

• The AXON chip reads whichever coil you fit and sets the output, so there is no wattage guesswork.

• Side-filling pod with SSS sealing keeps leaks down. Fewer sticky pockets.

• Runs the wider GTX mesh line, so your coil choices grow as your taste does.

Vaporesso Gen Air 40 Features

Lightest in Its Class, and You Notice It

Vaporesso cut the body down to 67g using zinc alloy, so it stays light without feeling hollow or cheap. Most 40W devices are chunkier and heavier in the hand. This one slips into a jeans pocket, and you forget it is there until you reach for it. Power that does not cost you portability.

What Does the AOP Airflow Actually Do?

The Adjustable-Airflow On Pod system moves the airflow control onto the pod itself, which cuts the air loss you get with older collar designs. Narrow it for MTL, widen it for RDL. Honestly, on a pod this compact, the range you get is wider than you would expect.

Two Coils, Two Completely Different Vapes

The GTX 0.4ohm mesh coil is built for restricted lung hits at 26W to 32W, and pairs best with thicker High VG E-Liquid. The GTX 0.8ohm handles MTL at 12W to 16W and suits 50/50 blends. Swapping between them takes seconds.

Fill It, Fire It, Forget It

The 2ml pod fills through a silicone-plugged port on the side, and the SSS leak resistance keeps liquid away from the battery contacts. Press-fit coils drop straight in with no threading. Four LED lights read out the battery at a glance. Not much to learn, which is the point.

Built to Grow With You

Start on the two included coils, then branch into the wider GTX mesh platform when you fancy a different draw. Your kit does not go obsolete the moment your taste shifts. On the 0.8ohm coil, it pairs neatly with 10mg or 20mg Nic Salt E-Liquids, which is where most ex-disposable users land first.

Vaporesso Gen Air 40 Colours

Seven finishes, all on the same lightweight body. Stocked at Pirate Vapes in the full range, so pick the one that suits you.

#buttons

• Aurora Green
• Dark Black
• Light Silver
• Matte Grey
• Midnight Blue
• Sakura Pink

How to Set Up the Vaporesso Gen Air 40

First-time setup takes a couple of minutes.

1. Charge the device fully over USB-C until all four LED lights hold steady.

2. Choose your coil. Press the 0.4ohm coil into the pod for RDL, or the 0.8ohm coil for MTL.

3. Drip three or four drops of e-liquid straight onto the exposed coil cotton to wet it before you fill.

4. Open the side port, fill the 2ml pod, then push the plug back in firmly.

5. Seat the pod, stand the kit upright, and leave it for a full five minutes so the mesh soaks through. Rushing this scorches the coil.

6. Click the button to set the output for your coil, then start with gentle draws and build up.

What's in the Vaporesso Gen Air 40 Box

Every kit comes with:

• the Gen Air 40 device,

• one 2ml refillable pod,

• a GTX 0.4ohm mesh coil,

• a GTX 0.8ohm mesh coil,

• a USB-C cable,

• and the user manual.

No e-liquid is included, so grab a bottle separately. No spare pods either, so it is worth adding a pack if you plan to run more than one flavour.

Made for the Whole GTX Coil Family

The pod runs Vaporesso's GTX mesh coils, not just the two in the box. The wider Vaporesso GTX Coils line covers a spread of resistances across the mesh range, so you can retune the draw whenever you like. The 0.4ohm leans RDL, the 0.8ohm leans MTL, and the platform gives you room to sit in between.

What will not fit is anything from a different system. This is a GTX-based kit, so XROS pods, PnP coils, and rival-brand parts are out. Match the coil to the pod, and you are sorted.

About Vaporesso

Vaporesso's Gen line began with full-size mods, then shrank the same engineering into pocket devices like this one. The Gen Air 40 answers a simple question: how light can a 40W pod kit get before it starts feeling flimsy? At 67g, the answer holds up well.

Sitting alongside it is the rest of the Vaporesso Range, from XROS pods to sub-ohm tanks, all sharing the AXON chip and GTX coil thinking that made the brand a fixture in UK vaping.

Stock Up and Save

Two coils get you going, but mesh wears down, and you will want spares before the flavour drops off. Keeping a GTX pack in the drawer means no downtime mid-week. Every order from Pirate Vapes ships same day when it is placed before 4 pm, packed to survive the post.

All stock is TPD compliant, sold through an age-verified checkout, over 18s only. Spend over £40 and delivery is on us with Free Pirate Post.

Conclusion

The Gen Air 40 nails a tricky combination: genuinely light, genuinely 40W, and simple enough for a first refillable kit without boring anyone who already knows their way around a coil. Two mesh coils cover MTL and RDL out of the box, the AXON chip removes the guesswork, and the GTX platform keeps your options open down the line.

If you want a pocket pod kit that does not feel like a compromise, this is an easy one to recommend. Grab a set of spare Replacement Pods and browse the wider Vape Accessories to round it out, then pick your colour at Pirate Vapes.

FAQs

Is the Gen Air 40 good for beginners?

Yes, especially if you are coming off disposables. The 0.8ohm coil gives a familiar MTL draw, and there is very little to set up.

What coils does the Gen Air 40 take?

Vaporesso GTX mesh coils. The 0.4ohm and 0.8ohm come in the box, and the wider GTX range fits too. Not XROS or PnP coils.

Is the Gen Air 40 MTL or RDL?

Both. That is the whole point of the two coils.

How much e-liquid does the Gen Air 40 pod hold?

2ml, in line with UK TPD rules, filled through a plugged side port. Versions sold outside the UK use a larger cartridge, but UK pods are 2ml.

What e-liquid should I use in the Gen Air 40?

For the 0.4ohm, thicker high-VG liquid works best. For the 0.8ohm, go 50/50 or nic salt at 10mg or 20mg. Match the liquid to the coil, and it sings.

How long does the Gen Air 40 battery last?

The 1800mAh cell comfortably covers a day for most MTL vapers. Heavier RDL use at 32W drains it faster, though USB-C tops it back up quickly.