Vaporesso GEN PT80 S Vape Pen Kit

Vaporesso GEN PT80 S Vape Pen Kit

Up to 80W of direct-lung power from a device that sets its own wattage. The Vaporesso GEN PT80 S is a slim pod mod built for DTL vaping, pairing the GTX mesh coil platform with a smart chip that reads the coil and dials in the right power for you.

It runs on a single 18650 battery (bought separately), charges over USB-C, and reads out on a small 0.91" OLED screen. The 2ml xTank pod fills from the top and resists leaks, making this an easy step up into sub-ohm vaping. Pirate Vapes stocks it in two finishes among our Vape Kits.

Why vapers choose this kit:

• It sets the wattage for you. Smart coil recognition reads the GTX coil and applies the right power, so there is no guesswork getting started with sub-ohm vaping.

• Up to 80W of DTL power drives the GTX mesh coils for warm, flavourful, cloud-forward draws.

• A removable 18650 battery means you swap in a charged cell rather than waiting on a built-in one, handy for heavy users.

• The 2ml xTank fills from the top and uses SSS leak-resistant tech to keep things tidy in a pocket or bag.

• COREX coil technology boosts flavour and stretches GTX coil life, so pods and coils last longer between changes.

Vaporesso GEN PT80 S Features

Smart Wattage and 0.91" OLED Screen

The GEN PT80 S runs on Vaporesso's intelligent chipset. Fit a GTX coil and the device recognises its resistance and selects a suitable wattage automatically, which takes the pressure off anyone still learning where to set the power. The 0.91" OLED screen keeps you informed, showing wattage, resistance and battery status at a glance.

80W Power for DTL Vaping

This is a DTL device through and through. With output up to 80W and the GTX mesh coil platform, it produces the warmer, cloudier draw sub-ohm vapers look for. Adjustable top airflow lets you open it up for bigger clouds or tighten it slightly for a more restricted lung hit. Pair it with a high-VG juice from our High VG E-Liquid range to get the best from it.

The xTank Pod and GTX Coils

The 2ml xTank pod fills from the top and drops onto the mod with magnets. Its Double Top System and SSS Leak-Resistant 2.0 design guard against leaks better than a standard tank, and COREX flavour-boosting tech extends the life of each GTX coil. Because it uses the wider GTX coil platform, you have a broad choice of resistances to tune flavour and vapour. Browse our GTX Coils and spare Replacement Pods to keep it running.

Single 18650 Battery With USB-C Charging

The GEN PT80 S takes a single 18650 battery behind a magnetic door, so you can carry a spare charged cell and swap it in seconds. It also charges in-device over USB-C at up to 2A. Do note the 18650 cell is not supplied in the kit, so you will need one to get going, which you can add from our Vape Batteries range.

Vaporesso GEN PT80 S Colour Options

Both finishes are the same device inside. Choose based on looks alone.

#buttons

• Light Silver
• Earth Brown

How to Set Up the Vaporesso GEN PT80 S

Fit a battery, fill the pod, and the device handles the rest.

1. Insert an 18650 battery. Pull off the magnetic battery door, drop in a charged 18650 the correct way round (the tray markings show the direction), and close it. The device powers up.

2. Fit a GTX coil into the xTank pod, then prime it by dripping a few drops of e-liquid onto the exposed cotton.

3. Fill the pod from the top, replace the top cap, and let it stand for five minutes so the coil soaks through.

4. Drop the pod onto the mod. The magnets hold it in place. The screen recognises the coil and sets a wattage.

5. Set your airflow using the top airflow ring, wider for more cloud, narrower for a tighter draw.

6. Vape. Press the fire button and draw. Recharge over USB-C, or swap in a fresh 18650 when the battery runs low.

What's in the Vaporesso GEN PT80 S Box

The kit includes:

• 1 x Vaporesso GEN PT80 S Mod

• 1 x Vaporesso xTank Pod (4.5ml)

• 1 x GTX 0.15Ω Mesh Coil (60–75W)

• 1 x GTX 0.3Ω Mesh Coil (32–45W)

• 1 x Type-C USB Cable

• 1 x User Manual

• 1 x Warranty Card

The 18650 battery is not included and is bought separately. No e-liquid is supplied.

GEN PT80 S Vape Coils, Pods and Compatibility

The GEN PT80 S uses the xTank pod and Vaporesso's GTX mesh coil platform, giving you a wide choice of resistances for flavour or cloud. It is fully compatible across the GTX coil range shared with other GEN and GTX series devices, so replacements are easy to find.

When a coil tires, prime and fit a fresh GTX coil; when a pod wears out, swap the pod. Keep spare GTX coils and pods on hand so a worn coil never interrupts your day.

About Vaporesso

Vaporesso is one of the most respected names in the vape world, known for reliable devices and its widely used GTX and GT coil platforms.

The GEN family sits among its most popular ranges, and the GEN PT80 S brings that pedigree to a compact DTL pod mod, combining smart wattage, solid build and the flavour-boosting COREX coil tech. It is a dependable choice for vapers moving into sub-ohm vaping.

Stock Up and Save

Since the GEN PT80 S needs a separate 18650, the smart move is to add a battery and a charger alongside it so you are ready to vape the moment it arrives, plus a few spare GTX coils to keep the flavour fresh. Adding those easily takes your basket past £40 for Free Pirate Post. 

Every Pirate Vapes order is a genuine Vaporesso device, never a clone, sent through an age-verified, over-18s checkout. Browse our Rechargeable Vapes for more reusable kits.

Conclusion

The Vaporesso GEN PT80 S is a capable little DTL pod mod that takes the guesswork out of sub-ohm vaping. Smart wattage, up to 80W of power, a leak-resistant top-fill xTank and the flavour-rich GTX coil platform make it an easy step up, while the removable 18650 keeps you going with a spare cell.

Add a battery and some coils, and it is ready to fly. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Does the GEN PT80 S Vape include a battery?

No. The GEN PT80 S runs on a single 18650 battery that is sold separately. You will need to add one to use the device.

Do I have to set the GEN PT80 S Vape wattage myself?

Not unless you want to. The device uses smart coil recognition to read the fitted GTX coil and set a suitable wattage automatically, and the OLED screen shows what it is running at.

What vaping style is the GEN PT80 S Vape for?

Direct-to-lung (DTL), the warmer, cloudier sub-ohm style. It runs up to 80W with GTX mesh coils and adjustable top airflow.

What e-liquid should I use with the GEN PT80 S Vape?

A high-VG e-liquid suits sub-ohm DTL coils best. Higher-VG shortfills give the smoothest clouds at these wattages.

How do I refill GEN PT80 S Vape?

The 2ml xTank pod is top-filling. Remove the top cap, add your e-liquid, and replace the cap. Its leak-resistant design helps keep things clean.

What coils does GEN PT80 S Vape take?

It uses Vaporesso's GTX mesh coils, shared across the GTX and GEN platform, so replacements are widely available in a range of resistances.