Vaporesso Gen 200 Vape Kit

Vaporesso Gen 200 Vape Kit

The Vaporesso Gen 200 Vape Kit is a dual-battery box mod built for vapers who want proper cloud and flavour without carrying a brick around. Firing from 5W right up to 220W on the AXON chipset, it pairs with the award-winning iTank and GTi mesh coils for a smooth, flavour-forward direct-to-lung vape.

At just 76g without cells, it's one of the lightest twin-18650 mods on the market. This is a sub-ohm kit for established vapers, not a beginner pod setup, and it needs two 18650 batteries that aren't included in the box.

Why vapers choose this:

• Genuinely lightweight for a 220W dual-battery mod, at just 76g before cells

• Comes with the award-winning iTank, rated among the best sub-ohm tanks around

• GTi mesh coils included in two resistances for flexible cloud and flavour tuning

• Leak-resistant, self-cleaning tank design means less mess during refills

• Stainless steel build with a rubberised, ergonomic grip that's comfortable for all-day use

Vaporesso Gen 200 Vape Kit Features

Lightweight Dual-Battery Power

Most twin-18650 mods feel like carrying a small brick, but the Gen 200 weighs in at just 76g without cells. That's largely down to the stainless steel frame wrapped in four layers of rubber coating, which keeps things sturdy without adding bulk. You still get full 220W output, so nothing about the power has been compromised for the sake of the lighter shape.

The Award-Winning iTank

The 2ml iTank uses COREX heating and a leak-resistant, self-cleaning design that's earned it recognition as one of the better sub-ohm tanks currently available. Top fill keeps refills quick and mess-free, while the bottom airflow system feeds the coil evenly for consistent flavour. It's built specifically for the GTi Coil Range, so swapping between resistances takes seconds.

GTi Mesh Coils Included

Two coils come in the box: a 0.4ohm for balanced, flavour-focused vaping between 50 and 60W, and a 0.2ohm for bigger clouds at 60 to 75W. Both use mesh construction for faster heat-up and more even saturation across the coil. Push/pull installation means no threading or fiddly parts, just clean, quick swaps whenever a coil needs replacing.

AXON Chipset with DIY Mode

The AXON chip powers the Gen 200 from 5W all the way to 220W, with modes including Pulse, F(t), and a fully adjustable DIY curve. DIY mode lets you shape the power output across the length of your puff, which can soften harsh starts and stretch coil life. The 0.96-inch TFT screen keeps wattage, battery status, and coil data clearly visible.

Reinforced 510 Connection

Three larger screws secure the 510 connection, giving a firmer seat for the iTank and reducing the chance of a loose or misreading tank over time. This also means the mod can run other Sub-Ohm Tanks up to roughly 28mm down the line, not just the included iTank, if you fancy experimenting with a different setup later.

Vaporesso Gen 200 Vape Kit Colours

The Gen 200 comes in six finishes to suit different tastes.

#buttons

• Black
• Blue
• Grey
• Pink
• Silver
• White

How to Set Up the Vaporesso Gen 200 Vape Kit

1. Open the battery door and insert two 18650 cells, matching the polarity markings inside.

2. Screw the iTank onto the 510 connection and check that the preinstalled coil is seated tightly.

3. Slide open the top cap and fill with a 70VG shortfill e-liquid.

4. Leave it standing for around 10 minutes so the coil fully primes before the first fire.

5. Press the fire button five times to power on, start around 50W on the 0.4ohm coil, and adjust upward until the flavour hits its sweet spot.

Sub-ohm coils need a thicker juice to keep up with the wattage, so stick to a 70VG E-Liquid rather than a nic salt or 50/50 Blend, which tend to burn too fast at these power levels.

What's in the Vaporesso Gen 200 Vape Kit Box

• 1 x Gen 200 mod (220W)

• 1 x iTank (2ml)

• 1 x GTi 0.2ohm mesh coil

• 1 x GTi 0.4ohm mesh coil

• 1 x USB-C charging cable and user manual

• 18650 batteries not included

Built for the iTank and GTi Coil Range

The Gen 200 is designed around the iTank, and it only takes GTi coils, available from 0.15ohm right up to 0.5ohm for anyone who wants to fine-tune cloud size against battery life. Older GT coils and the GTX coils used in Vaporesso's pod kits won't fit this tank, so always check the packet before restocking.

Once you've run through the included pair, browse the full Vaporesso Coils range for spares. Thanks to the standard 510 connection, the mod itself can also run other sub-ohm tanks later on if you want to switch things up.

About Vaporesso

Vaporesso has built a reputation as one of the more innovative names in vaping, known for pushing mesh coil technology and clean, ergonomic device design. The brand's tanks and mods regularly pick up industry recognition, and the iTank included in this kit is a good example of that reputation holding up under real-world use.

From compact pod systems through to full sub-ohm mods like the Gen 200, Vaporesso tends to focus on getting the balance right between performance, battery efficiency, and something that actually feels good in the hand.

Stock Up and Save

Buying your Gen 200 kit alongside a couple of spare GTi coils and a matched pair of 18650s saves you a second order later, since coils typically need replacing every one to two weeks depending on use.

Every order at Pirate Vapes is checked and packed carefully before it goes out, with age-verified checkout and discreet packaging so your parcel arrives exactly how it should. All products sold are genuine, TPD-compliant where applicable, and dispatched only to customers who've confirmed they're 18 or over.

Conclusion

The Vaporesso Gen 200 Vape Kit is a solid pick for anyone who's outgrown a small pod system and wants proper sub-ohm power without the extra weight most dual-battery mods carry. The iTank and GTi coils do a lot of the heavy lifting on flavour, and the DIY curve gives you room to tune the vape to your own preference over time.

Just remember the 18650 batteries aren't included, so factor that into your order before checkout. For a wider look at other dual-battery and sub-ohm options, it's worth browsing the rest of what's available through Pirate Vapes.

FAQs

Does this kit come with batteries?

No, you'll need two high-drain 18650 batteries, sold separately. The kit won't fire without them, so it's worth adding a matched pair to your order.

Which coils work with this kit?

Only GTi coils, ranging from 0.15ohm to 0.5ohm. Older GT and GTX coils are built for different Vaporesso tanks and won't fit the iTank.

Is this suitable for a beginner?

Not really. It's aimed at vapers already comfortable with sub-ohm, direct-to-lung setups rather than someone coming straight off cigarettes or a simple pod kit.

What wattage should I start on?

Start around 50W on the 0.4ohm coil and work upward gradually until you find where the flavour peaks, usually somewhere in the 50 to 75W range depending on the coil fitted.

What type of e-liquid does it need?

A 70VG shortfill works best. Nic salts and 50/50 juices are made for lower-power pod kits and tend to taste harsh or burn through nicotine too quickly at sub-ohm wattages.

How long do the included coils last?

Usually one to two weeks with regular use, though this depends on how often you vape and how sweet your chosen e-liquid is.