Vaporesso Target 100 Kit

IP67 water-resistant. On a vape mod. That is the headline spec most people miss when they first look at the Vaporesso Target 100, but it is the one that matters most in practice. The AXON chip inside pushes 1W to 100W through a 0.96-inch TFT colour screen, and the included iTank runs Vaporesso's GTi mesh coils at sub-ohm wattages for proper DTL cloud and flavour production.

Takes either a single 18650 or 21700 battery (not included). F(t) flavour mode, turbo airflow, USB-C charging, water-resistant braided finish for grip, 2ml TPD top-fill tank, 510 thread. Four colours stocked. Over 18s only. Available at Pirate Vapes with age-verified checkout.

Why vapers choose this:

• IP67 water-resistant with a braided textured finish. Survives splashes, rain, and sweaty hands.

• 18650 or 21700 battery compatibility. Pick the cell that suits your needs. Neither included.

• AXON chip with F(t) flavour mode, VW up to 100W, and a 0.96" TFT colour screen

• iTank with GTi mesh coils (0.2 ohm and 0.4 ohm included). Turbo airflow for DTL flavour.

• 510 thread and compact body. Pair it with any tank you already own.

Vaporesso Target 100 Kit Features

IP67 Water Resistance Is Not Something Most Mods Offer

Rain. A spilled drink. Condensation in a bag. Sweaty palms on a warm day. Most mods have no protection against any of that. The Target 100 is rated IP67, which means it handles water exposure that would kill most devices. The braided textured body finish adds grip and keeps moisture from sitting on the surface. It does not mean you can submerge it and use it underwater. It does mean you stop worrying about the weather or a clumsy moment ending your mod.

Two Battery Sizes in One Mod

The battery compartment fits a single 18650 or a single 21700. That flexibility is unusual. If you already own 18650 cells from another mod, use those. If you want more capacity and longer runtime, buy a 21700. Both fit with no adapter needed. The USB-C port charges whichever cell you have installed, though external charging is always the better option for battery longevity.

The AXON Chip and F(t) Mode

Vaporesso's AXON chip runs the output regulation, and it is one of the more capable chips at this price point. Standard variable wattage up to 100W. Plus F(t) mode, which adjusts the power curve dynamically to boost flavour intensity based on coil temperature. In practice, F(t) pulls more flavour from the same coil and liquid combination than straight VW does. The 0.96-inch TFT screen shows everything in colour: wattage, voltage, resistance, battery, puff count. Bright, clear, and readable outdoors.

GTi Mesh Coils and Turbo Airflow

The iTank ships with two GTi mesh coils: a 0.2 ohm rated at 60 to 75W and a 0.4 ohm rated at 50 to 60W. Both are sub-ohm mesh coils designed for DTL vaping with High-VG Shortfill E-liquids. The turbo airflow system channels air directly across the mesh surface for stronger flavour delivery and dense vapour production. Adjustable at the base of the tank.

Compact for a 100W Mod

The Target 100 does not feel like a 100W device in the hand. Vaporesso kept the body compact and the weight balanced, even with a 21700 installed. The braided finish adds texture without adding bulk. It sits in a jacket pocket without screaming "vape mod" and holds comfortably during extended sessions. Four colour options, each with the same braided water-resistant body.

Vaporesso Target 100 Kit Colours

Four finishes. Same IP67 body, same braided texture, same internals.

#buttons

• Carbon Black
• Forest Green
• Navy Blue
• Sunset Red

How to Set Up the Vaporesso Target 100 Kit

1. Battery first. Unscrew the battery cap at the base. Drop in a fully charged 18650 or 21700 cell. Check polarity markings inside the compartment. Screw the cap back on.

2. Coil into the tank. Unscrew the iTank base. Push the GTi 0.4 ohm coil (the lower-wattage option, better to start with) into the base until it clicks. Drip three or four drops of your e-liquid directly onto the mesh visible through the coil's cotton ports. Do not skip this. Mesh coils burn fast on dry cotton.

3. Fill the tank. Screw the base back on. Slide the top cap to reveal the fill port. Pour in your high-VG shortfill or e-liquid. Close the cap. Stand the kit upright for at least ten minutes.

4. Power on and configure. Five clicks to power up. The TFT screen lights up. Set your wattage using the adjustment buttons. 

What's in the Vaporesso Target 100 Kit Box

• One Vaporesso Target 100 mod with AXON chip and IP67 rating. 

• One iTank (2ml TPD, top-fill, adjustable airflow). 

• One GTi 0.2 ohm mesh coil (60-75W). 

• One GTi 0.4 ohm mesh coil (50-60W). 

• Three spare O-rings. 

• One USB-C cable. 

• User manual and warranty card. 

No battery. Buy an 18650 or 21700 from the batteries section before the kit arrives.

Runs GTi Coils, iTank 2, and any 510 Tank

The iTank uses Vaporesso's GTi coil platform. The included 0.2 ohm and 0.4 ohm mesh coils are the starting point, but the GTi range includes additional resistance options for different wattage preferences. Replacement GTi Coils are widely available.

The mod has a standard 510 thread. Unscrew the iTank and put on any 510-threaded sub-ohm tank or MTL tank you already own. At 100W with support down to very low resistances, the Target 100 handles virtually any tank on the market.

E-liquid: the iTank with GTi mesh coils is a DTL sub-ohm tank. Use 70/30 or higher VG shortfills at 3mg or 6mg freebase. Do not use nic salts above 6mg in this setup. Sub-ohm wattages amplify nicotine harshness at higher strengths.

About Vaporesso

Vaporesso is a subsidiary of SMOORE International, headquartered in Shenzhen, China. The brand is known for the XROS pod kit series, the Luxe range, the Target mod lineup, and the AXON chipset that runs across their advanced devices. Vaporesso developed the COREX heating technology used in their pod kits and the GTi coil platform for their sub-ohm tanks. The Target 100 sits in the upper end of their kit range: a feature-rich mod aimed at experienced DTL vapers who want durability and performance without a three-figure price tag.

Stock Up and Save

Coils and e-liquid are the running costs. A pack of GTi replacement coils and a battery alongside the kit covers your first month without needing a second delivery. We ship every mod kit individually boxed with padding to protect the device and tank during transit. Age-verified checkout, same-day dispatch before 4 pm, full tracking. Over 18s only. Orders over £25 ship free with Free Pirate Post.

Conclusion

The Target 100 is a proper sub-ohm mod for vapers who want more than a pod kit can deliver. IP67 water resistance, dual battery compatibility, the AXON chip with F(t) mode, a TFT colour screen, and GTi mesh coils that produce serious flavour and cloud at 50 to 75W.

The braided body finish gives it grip and weather resistance that other mods at this price simply do not have. If you are looking for a durable, capable DTL mod with a 510 thread and the flexibility to run any tank and any battery size you choose, the Target 100 is a strong option. Pick one up at Pirate Vapes.

FAQs

Does the Vaporesso Target 100 Kit come with a battery?

No. Takes a single 18650 or 21700, neither included. Buy one separately. The mod charges via USB-C, but you need the battery first.

What coils does the Vaporesso Target 100 Kit use?

GTi mesh coils. The kit includes a 0.2 ohm (60-75W) and a 0.4 ohm (50-60W). Both are sub-ohm mesh coils for DTL vaping.

Is the Vaporesso Target 100 Kit waterproof?

IP67 rated. Water-resistant, not waterproof. It handles splashes, rain, and brief water exposure. Do not submerge it deliberately. The braided finish adds water repellency and grip.

What e-liquid works best with the Vaporesso Target 100 Kit?

70/30 or higher VG shortfills at 3mg or 6mg freebase. The iTank is a sub-ohm tank. Do not use high-strength nic salts in this kit. Sub-ohm coils at 50 to 75W make 20mg nic salt unvapeable.

Can the Vaporesso Target 100 Kit use other tanks?

510 thread. Yes. Any 510-threaded tank works. The mod supports up to 100W, so MTL tanks, sub-ohm tanks, and RDAs all fit and function.

What is F(t) mode on the Vaporesso Target 100 Kit?

A flavour-boosting output mode. The AXON chip adjusts the power curve based on coil temperature to maximise flavour from your liquid. Worth trying once you are comfortable with standard VW mode.