Vaporesso Vibe Dual Smart Replacement Pods

One pod, two draws. That is what sets the Vaporesso Vibe Dual Smart Replacement Pods apart from an ordinary refillable pod. Each 2ml pod runs Vaporesso's dual mesh setup: two mesh coils stacked inside a single core that switch between a smoother ECO mode and a punchier PWR mode, depending on how your Vibe device is set. Refillable, TPD-ready, and built for the whole Vibe range.

Two resistance pairings are stocked, so you can sit tight in MTL or edge into restricted DTL. Sold in packs of two, and among the more versatile Replacement Pods going.

Why vapers choose this:

• Two vapes from one pod. ECO mode alternates the coils for a cooler, longer-lasting draw, while PWR fires both together for warmer vapour and a bigger hit. You switch on the device, not by buying a second pod.

• Genuine 2ml refillable, so you run whatever nic salt or freebase liquid you like.

• Dual mesh wicks and heats more evenly than a single coil, which keeps flavour cleaner deeper into the pod's life.

• Clear PCTG body lets you eyeball the juice level at a glance.

• Fits the entire Vibe family, not just one device.

Vaporesso Vibe Pod Features

One Pod, Two Modes

This is the whole idea behind the pod. In ECO mode, the two coils take turns firing, one puff each, which sips power and stretches how long the pod lasts. Flip the device to PWR mode, and both coils heat at once for denser, warmer vapour. Same juice, same pod, two genuinely different sessions.

What Dual Mesh Actually Does

Inside the core sit two mesh strips stacked vertically, wired through a three-pin base. Mesh heats fast and spreads that heat across a wider surface than old-style wire coils, so you get sharper flavour and less of that fade towards the end. Thing is, having two of them is what makes the mode-switching possible in the first place.

Which Resistance Should You Pick?

Depends on your draw. The lower-resistance pairing leans warmer and airier, closer to restricted DTL, and pairs nicely with High VG E-Liquids. The higher-resistance pairing stays tight and cool, the MTL sweet spot for nic salts at 10mg or 20mg. Neither is wrong. It is about how you like to inhale.

Refilling Without the Mess

The pod fills from the side through a small silicone plug. Lift it, drip your liquid in past the plug, press it shut. No juice near the airflow, no flooding the coil, and the anti-leak build keeps things sealed once it clicks back onto the device. Good pairing for Nic Salt E-Liquids at MTL resistances.

Built From Food-Grade PCTG

The shell is food-grade PCTG, the same clear, tough plastic Vaporesso uses across its pod range. It resists cracks and staining, takes daily knocks, and stays see-through so the tank never turns cloudy on you. Small thing, but it means you always know when a refill is coming.

Vaporesso Vibe Pod Resistance Options

Two pods sit in the store picker. Both are dual mesh, both refillable, and the difference comes down to how warm and open you want the draw.

The 0.6ohm / 0.8ohm pod is the one to reach for if you like some warmth and cloud. In PWR mode it drops to 0.6ohm (firing at 24W) for a fuller restricted-DTL pull. Ease it into ECO at 0.8ohm (firing at 14W) and the same pod calms right down into a smoother mouth-to-lung draw. A flexible all-rounder.

Prefer things tight and cool? The 0.7ohm / 1.0ohm pod runs 1.0ohm in ECO (firing at 12W) for a crisp, efficient MTL draw that suits stronger nic salts, then steps up to 0.7ohm in PWR (firing at 20W) when you want a bit more body. It sips battery and stretches pod life further than the lower pair.

#buttons

• 0.6ohm / 0.8ohm
• 0.7ohm / 1.0ohm

How to Set Up the Vaporesso Vibe Pod

Barely a minute of work, then a short wait.

1. Ease out the old pod from the device. The magnetic base pops free with a gentle pull.

2. Open the silicone plug on the side of the fresh pod.

3. Fill with e-liquid, tilting the nozzle against the inner wall to keep air out, then press the plug fully closed.

4. Wick the coil by adding two drops onto the mouthpiece opening so the mesh starts to soak from both ends.

5. Stand the pod upright for a good 8 minutes before the first pull, giving the dual mesh time to fully wet through. Rushing this is the fastest way to scorch a new coil.

6. Click the pod back on, start in ECO mode, and take a few soft draws before switching to PWR.

What's in the Vaporesso Vibe Pod Box

Two refillable pods in your chosen resistance pairing. That is it. No e-liquid inside, and no device, since these are replacement pods for a Vibe kit you already own.

Fits Every Device in the Vaporesso Vibe Family

These pods are made for the full Vibe series, so if you own one, you are covered. That includes the original Vibe, the Vibe Nano, the Vibe Nano Pro, and the Vibe SE and SE2. Each device reads the pod and handles the ECO and PWR modes itself. Keep a spare pack alongside your Refillable Pod Kits so you are never caught with a worn coil.

What they will not fit is anything outside the Vibe line. They are not XROS pods, not Luxe pods, and not cross-compatible with other Vaporesso systems. If your device is a Vibe, you are in the right place. If it is not, you will need the pod made for it.

About Vaporesso

Vaporesso is made by Shenzhen Smoore, one of the largest vape hardware manufacturers in the world, and the Vibe line is where it put its dual-mesh smart-pod idea to work. Rather than sell you two separate pods for two draw styles, the Vibe pod carries both coils and lets the device decide: ECO for economy and smoothness, PWR for punch.

It is the same engineering discipline that made the XROS and Luxe ranges household names in UK pod vaping, applied to a pod that quietly does two jobs. Explore the wider Vaporesso Range for kits and spares.

Stock Up and Save

Do the maths on a refillable pod, and it wins every time. One pod outlasts a stack of prefilled ones, and buying a spare two-pack now means no dead evenings waiting on delivery. Set them up on Auto Refill through The Crow's Nest, and they arrive before you run dry.

Every order from Pirate Vapes ships same day when placed before 4 pm, sealed in padded packaging. All stock is TPD compliant, checkout is age-verified, and we sell to over-18s only. Browse the full refills and pods range while you are stocking up.

Conclusion

The Vibe pod is a clever bit of kit for the money. Dual mesh, a proper 2ml refillable tank, and a mode switch that turns one pod into two very different vapes. Pick the 0.6/0.8 pair for warmth and cloud, or the 0.7/1.0 pair for a tight, efficient MTL draw.

If you run any Vibe device, these are the pods it was built for. Stock up on spares and other Vape Accessories here, and see the rest of the range at Pirate Vapes.

FAQs

Which kits do the Vibe pods fit?

The whole Vaporesso Vibe series. Vibe, Vibe Nano, Nano Pro, and the SE and SE2. They will not work in XROS, Luxe, or other Vaporesso devices.

What do the two Vibe Dual resistance numbers mean?

Each pod runs two resistances. The higher one is ECO mode for a smoother, longer-lasting draw. The lower one is PWR mode for warmer, bigger vapour. The device switches between them.

How much liquid does a Vibe Dual pod hold?

2ml, in line with UK TPD rules. You may see 4.5ml quoted on non-UK listings, but pods sold here are the 2ml version.

Can I use nic salts in the Vibe Dual pods?

Yes, and the tighter 1.0ohm ECO setting suits them well. For warmer PWR vaping, a higher-VG freebase liquid works better.

How long does a Vibe Dual pod last?

Usually one to two weeks per pod with daily use, longer in ECO mode. Sweeter, darker liquids gunk the mesh faster and shorten that.

Are the Vibe Dual pods refillable or prefilled?

Refillable. You fill them yourself from the side, so you choose the flavour and strength every time.