Vaporesso Vibe SE 2 Pod Kit

One pod, two completely different vapes. That is the neat trick of the Vaporesso Vibe SE 2, a Refillable Pod Kit that builds a 0.6ohm and a 0.8ohm mesh coil into a single Smart Dual Mesh pod and lets you flip between them on the device.

PWR mode runs the 0.6ohm at 28W for a warmer, punchier hit. ECO mode drops to the 0.8ohm at 15W for a cooler, longer-lasting draw. Behind it sits a 1400mAh battery, USB-C charging, adjustable airflow, and a tri-colour battery light. Ten finishes, MTL to RDTL, and about as simple as vaping gets.

Why vapers choose this:

• Two vapes in one device. The dual-coil pod gives you a warm PWR draw and a cool ECO draw from the same shell, switched with a single slide. Nothing else at this price does that as cleanly.

• A real battery. 1400mAh is a big step up from most starter pods, and it shows in how rarely you reach for a charger.

• Adjustable airflow. Tight MTL or a slightly airier RDTL, tuned to taste.

• RGB battery light. A quick glance tells you where you stand.

• Ten finishes. Glossy metallics or textured leather-style looks. Something for every taste.

Vaporesso Vibe SE 2 Features

One Pod, Two Modes

This is the headline. Inside a single Smart Dual Mesh pod sit two coils: a 0.6ohm for PWR mode at 28W, and a 0.8ohm for ECO mode at 15W. You slide to switch; no pod change needed. Warm and punchy when you want it, cool and frugal when you do not. Clever, and it just works.

How Long Does 1400mAh Really Last?

Long enough that daily charging stops being a thing. Vaporesso's own testing puts ECO mode at up to around 30 hours between top-ups, and while your mileage depends on how hard you vape, most people running nic salts at 15W comfortably clear a full day. PWR mode at 28W drains quicker, fair enough, since it is doing more work.

That Tri-Colour Battery Light

A small RGB LED on the side reports charge at a glance: green when you are well stocked, blue through the middle, red when it is time to plug in. No waking the device, no guessing. It is a small thing that saves you from being caught out mid-afternoon.

Dial The Airflow To Your Draw

A single control tightens or opens the draw. Wind it down for a proper cigarette-style MTL pull, or open it up towards a looser RDTL feel. Pair the tighter setting with 20mg nic salts, and it does a convincing job of replacing a cigarette.

Mesh That Actually Tastes Like Something

Dual mesh heats evenly across a wide surface, which keeps flavour clean and consistent rather than muddy. It suits 50/50 blends and salts especially well. Load it from the Nic Salts Range at 10mg or 20mg and the SE 2 punches above its price on taste.

Vaporesso Vibe SE 2 Colours

Ten finishes, split between glossy Gleaming tones and textured Leather-style looks. Purely cosmetic, so pick whatever suits you.

#buttons

• Gleaming Gold
• Gleaming Grey
• Gleaming Purple
• Gleaming Black
• Leather Black
• Leather Brown
• Leather Grey
• Leather Pink
• Leather White

How to Set Up the Vaporesso Vibe SE 2

Under two minutes and you are away.

1. Charge the device first over USB-C. Remember the cable is separate, so use any standard lead or add one from Chargers and Cables.

2. Open the pod's top-fill port and add your chosen e-liquid, keeping clear of the central airflow tube. Fill to just below the max line.

3. Seal the port firmly and wipe away any excess from the outside.

4. Click the pod onto the device. The magnetic base pulls it into place.

5. Leave it standing for a slow eight to ten minutes so the dual mesh wicks through fully. Firing it dry will burn the coil, and there is no coming back from that.

6. Pick your mode and airflow, take a gentle draw, and adjust to taste.

What's in the Vaporesso Vibe SE 2 Box

The kit includes: 

• The Vibe SE 2 battery, 

• one Smart Dual Mesh pod with the 0.6ohm and 0.8ohm coils built in, 

• and a user manual with warranty card. 

There is no USB-C cable and no e-liquid included, so add both if you do not already have them to hand.

Runs on the Vibe Smart Dual Mesh Pod Platform

The SE 2 takes the Replacement Pods from Vaporesso's Vibe Dual Smart range, which fit across the wider Vibe series. Spares come as a pack of two with the same 0.6ohm and 0.8ohm dual-coil setup, plus a 0.7ohm and 1.0ohm pairing if you want a tighter MTL draw. Swapping one in is instant thanks to the magnetic mount.

What it will not take is pods from other brands. Vaporesso's own fitment is unique to the Vibe family, so keep to genuine Vibe pods for a leak-free seal.

About Vaporesso

Vaporesso, part of the SMOORE manufacturing group, is one of the most reliable names in refillable hardware, known for the XROS pod series and the GTX coil platform. The Vibe line is its entry-level MTL family, and the SE 2 refines it: a bigger battery, the one-pod-two-modes Smart Dual Mesh setup, and simple auto-draw firing aimed squarely at ex-smokers and disposable-switchers.

It is a sensible, well-built starting point rather than a gadget, which is exactly the point. Explore the wider Vaporesso Range for pods and coils.

Stock Up and Save

The SE 2 is cheap to run once you are set up, but it pays to have the pieces ready. Grab a spare pod pack, a bottle of salts, and a USB-C lead since one is not in the box, and you are sorted for weeks.

Every order from Pirate Vapes ships the same day when placed before 4 pm, packed to arrive safely. All stock is TPD compliant, sold through an age-verified checkout, over-18s only.

Conclusion

The Vaporesso Vibe SE 2 is a smart little pod kit that does more than its price suggests. The dual-coil pod gives you two genuinely different draws from one device, the 1400mAh battery keeps you going, and adjustable airflow lets you fine-tune the feel.

It suits beginners and disposable-switchers, and works as a solid backup for seasoned vapers too. Compare it against the best refillable pod kits, pick up Vape Accessories to go with it, and order from Pirate Vapes today.

FAQs

Is the Vibe SE 2 refillable?

Yes. You fill the 2ml pod yourself, which keeps running costs well below disposables.

What is the difference between ECO and PWR mode in the Vibe SE 2?

PWR runs the 0.6ohm coil at 28W for a warmer, stronger vape. ECO runs the 0.8ohm at 15W for a cooler, longer-lasting one. Same pod, switched on the device.

Does the Vibe SE 2 come with a charging cable?

No. It charges over USB-C, but you supply the lead. Any standard one works.

What e-liquid suits the SE 2?

Nic salts or 50/50 blends at 5mg, 10mg or 20mg. It handles both MTL and a looser RDTL draw.

Which pods fit the Vibe SE 2?

Only genuine Vaporesso Vibe Dual Smart pods. Other brands use different fitments and will not seat properly.

How do I know when to charge the Vibe SE 2?

The tri-colour light tells you: green is high, blue is mid, red means plug in soon.