VooPoo Drag Q Vape Kit

VooPoo Drag Q Vape Kit

The Drag Q takes the classic DRAG look, leather panels wrapped around a zinc alloy frame, and shrinks it into a pocket-sized Refillable Pod Kit. A 1250mAh built-in battery drives 8 to 25W, and the clever part is the airflow ring: twist it and the device tunes both the draw and the matching power together, with a soft ticking as you go.

It ships with the ITO-X pod and two coils, a 0.5ohm for restricted DTL and a 1.2ohm for MTL. USB-C charging, a gradient light bar, and six colours. Rechargeable, refillable, over 18s only.

Why vapers choose this:

• The airflow ring adjusts power at the same time, so you set your draw once and the device works out the wattage to suit it. No menus, no button-mashing.

• Two coils in the box cover both ends of the spectrum, a tight MTL and a looser RDL, so you can settle on your style before buying more.

• Leather and zinc alloy, not moulded plastic. It feels like the bigger DRAG mods.

• A gradient light bar shows battery and power at a glance.

• Refillable 2ml pod you top up yourself, which keeps running costs low.

VooPoo Drag Q Vape Kit Features

Airflow and Power, Tuned Together

This is the Drag Q's trick. Most kits make you set airflow and wattage separately. Here, the ring does both at once, dialling in the output to match how open or closed the draw is. VooPoo added a gentle ticking feedback so you can feel each step. It sounds like a gimmick until you use it.

Which Coils Does It Take?

The ITO coil platform. The kit includes the ITO-M0 0.5ohm for a warm restricted-DTL vape and the ITO-M3 1.2ohm for a tighter MTL draw, and it runs the wider range of VooPoo ITO Coils beyond those two. Pick the resistance, the device sorts the power.

Built Like the Bigger DRAGs

Leather-wrapped panels set into a zinc alloy chassis. At 92.5 x 24 x 14.14mm, it slips into a pocket, but the weight and finish carry the premium DRAG feel rather than the hollow plastic of most compact pod kits. It reads as a proper device, not a starter toy.

Top Fill, Minimal Mess

The ITO-X pod fills from the top. Lift the cap, drip in your liquid, close it. It suits 10 to 20mg Nic Salts on the 1.2ohm coil, or lower-strength freebase on the 0.5ohm. A stainless steel base locks the pod firmly to the device.

A Light Bar That Actually Tells You Something

The side gradient light shifts colour to show real-time power and remaining battery. Glance down, see where you are, charge before it dies. Small feature, but you stop getting caught out mid-day.

VooPoo Drag Q Colours

Six finishes, all leather-and-alloy, all carrying the DRAG signature look. The store picker stocks the full run below.

#buttons

• Carbon Fiber
• Chestnut
• Classic Red
• Galaxy Blue
• Marsala
• Vitality Orange

How to Set Up the VooPoo Drag Q

Quick job. A couple of minutes from box to first draw.

1. Press-fit your chosen ITO coil into the base of the ITO-X pod until it seats.

2. Drip four to five drops of e-liquid straight onto the coil's cotton before you fill.

3. Open the top-fill cap and fill to just below the max line with your 50/50 E-Liquids or nic salt.

4. Slot the pod onto the device. The steel base clicks it into place.

5. Stand it upright for a solid seven minutes before the first pull, long enough for the wick to saturate fully. Rush this, and you scorch the coil.

6. Click the fire button five times to switch on, twist the airflow ring to your draw, and start gentle. The device matches the power for you.

What's in the VooPoo Drag Q Box

• One Drag Q device,

• one 2ml ITO-X pod,

• an ITO-M0 0.5ohm coil,

• an ITO-M3 1.2ohm coil,

• a USB-C cable,

• and the manual.

No e-liquid is included, so add a bottle to suit your chosen coil. Everything else you need to start is in the box.

Runs the Full VooPoo ITO Coil Range

The Drag Q is built around VooPoo's ITO coil system, so any coil in that range drops straight into the ITO-X pod. When a coil tires, you press in a fresh one rather than binning the pod. Spare Replacement ITO-X Pods are worth keeping too, since the plastic clouds over time.

What it will not take: PnP coils, TPP coils, or any of VooPoo's other platforms. ITO only. If the coil says ITO on it, you are in the right place.

About VooPoo

VooPoo made its name with the DRAG line and the GENE chip that runs through it, a fast, stable board with a full stack of safety protections. The Drag Q is the compact, MTL-focused member of that family, taking the DRAG styling and the newer ITO coil platform and packing them into a pocket device. Rather than reinventing the wheel, it borrows the parts of the bigger DRAGs that vapers already trust, then tunes the airflow-and-power system for a simpler, one-ring experience.

Stock Up and Save

A refillable kit like this pays for itself. Instead of buying a fresh disposable every couple of days, you top up a 2ml pod and change a coil now and then, which works out far cheaper over a month. Keep spare ITO coils and a bottle of liquid on hand so you are never caught short.

Every order from Pirate Vapes ships the same day before 4 pm. TPD compliant, age-verified checkout, over 18s only.

Conclusion

The Drag Q is a rare thing in compact pod kits: it feels properly built, and it does both MTL and restricted DTL without fuss, thanks to an airflow ring that sets the power for you. Two coils in the box, a 2ml refillable pod, and six leather finishes to pick from.

If you want a small device that carries the DRAG name and means it, this is the one. Browse the wider VooPoo Range, stock up on Vape Accessories, and order from Pirate Vapes.

FAQs

What vaping styles does the Drag Q handle?

Both. The 1.2ohm coil gives a tight MTL draw; the 0.5ohm opens into a warmer restricted DTL. Switch coils to switch styles.

Does the Drag Q come with coils?

Yes, two. An ITO-M0 0.5ohm and an ITO-M3 1.2ohm, one of each in the box.

What is the Drag Q pod capacity?

2ml, in line with UK TPD rules. You refill it from the top.

Can I run nic salts in the Drag Q?

Yes, and they suit it well. Pair 10 to 20mg salts with the 1.2ohm coil for a smooth, tight, low-wattage vape.

How do I adjust the Drag Q power?

You don't, directly. Twist the airflow ring and the Drag Q auto-matches the wattage to your draw. Five clicks of the fire button turn it on and off.

Which coils fit the Drag Q?

The VooPoo ITO coil series. PnP and TPP coils do not fit.