VooPoo PnP Pod Tank

Half pod, half tank, fully 510-threaded. The PnP Pod Tank takes everything VooPoo built into the PnP coil platform and puts it inside a 26mm tank body that screws onto any mod. Same PnP coils that run in the Drag X, Drag S, and Drag 3. Same mesh options. Same coil stock.

But instead of clicking into a pod device, this tank sits on a 510 connection like a traditional sub-ohm tank. 2ml capacity, dual adjustable bottom airflow, bottom-fill, two mesh coils in the box (0.3 ohm VM1 and 0.15 ohm VM5), stainless steel and PCTG construction. Two colours: Black and Silver. Over 18s only.

Why vapers choose this:

• PnP coils on a 510 mod. Use VooPoo's pod coils in a traditional tank format for the first time.

• Cross-compatible coil stock with the Drag X, Drag S, Drag 3, Vinci, and every PnP-compatible device

• 26mm diameter sits flush on most box mods. Compact for a sub-ohm tank.

• MTL and DTL from one tank. The VM1 at 0.3 ohm handles restricted draws. The VM5 at 0.15 ohm opens into full DTL.

• Two mesh coils included with different resistances. Try both draw styles from the box.

VooPoo PnP Pod Tank Features

PnP Coils on a 510 Thread Is the Whole Point

VooPoo designed the PnP coil system for their pod kits. The Drag X, Drag S, Drag 3, and Vinci all use PnP coils in pod cartridges. The PnP Pod Tank takes those same coils and puts them inside a 510-threaded tank body instead. Why does that matter? Because it means any mod you own becomes a PnP device. You are no longer limited to VooPoo's pod kits to use PnP coils. Screw this tank onto a Geekvape mod, a SMOK mod, a Vaporesso mod. The coils do not care what device they sit on.

Bottom Fill Is Unusual, and There Is a Reason for It

Most modern tanks fill from the top. The PnP Pod Tank fills from the bottom. You unscrew the base, pour in your e-liquid, and screw the base back on. It is slightly less convenient than a top-fill, but the design keeps the top of the tank clean and allows VooPoo to maintain the same internal geometry as the PnP pod cartridge. The coil sits in the same position, the airflow routes through the same path, and the flavour output matches what you would get from a Drag pod. That consistency is the trade-off for bottom filling.

The VM1 and VM5 Cover Both Ends of the Draw Spectrum

The VM1 at 0.3 ohm runs at lower wattage with a tighter, more restricted draw. Good for flavour-focused DTL vaping or a loose MTL pull with nic salts at 10mg. The VM5 at 0.15 ohm pushes harder for denser cloud production and a wider open draw. Both are mesh. Both deliver clean flavour. The VM1 lasts longer per coil because of the lower power draw. The VM5 goes through liquid faster but produces noticeably more vapour.

26mm and PCTG Keeps the Weight Down

The tank body combines stainless steel with PCTG plastic, which makes it lighter than an all-steel tank of the same size. At 26mm, it matches the width of the Geekvape Zeus Sub Ohm and sits flush on most box mods. The PCTG section is transparent enough to check liquid level, and the material does not crack from contact with acidic or citrus-based e-liquids the way some glass alternatives can.

One Coil Platform Across Pods and Tanks

Own a Drag X for portable use and want the same coils in a home setup on a bigger mod? The PnP Pod Tank solves that. Your PnP coil stock works in both. No buying two different coil families for two different devices. Browse VooPoo PnP Coils for the full resistance range beyond the VM1 and VM5 included in the box.

VooPoo PnP Pod Tank Colours

Two finishes. Same internals, same coil fit.

#buttons

• Black
• Silver

How to Set Up the VooPoo PnP Pod Tank

1. Unscrew the base of the tank. The PnP-VM5 0.15 ohm coil may already be fitted. If not, push the coil into the base until it clicks.

2. Prime the coil. Drip a few drops of e-liquid onto the cotton visible through the mesh openings. This pre-wets the cotton before filling.

3. Fill through the base. With the base unscrewed, pour your 70/30 E-Liquid into the tank from the bottom opening. Screw the base back on tightly.

4. Stand the tank upright for five minutes. The mesh coil needs time to soak. Firing before saturation means a burnt coil on draw one.

5. Screw the tank onto your 510 mod. Set wattage to suit the coil (start low, work up). Adjust the dual bottom airflow ring to your preferred tightness.

What's in the VooPoo PnP Pod Tank Box

• The PnP Pod Tank in your chosen finish. 

• One PnP-VM1 0.3 ohm mesh coil. 

• One PnP-VM5 0.15 ohm mesh coil (may be pre-installed). 

• A bag of spare O-rings and parts. 

No mod, no battery, no e-liquid. You need a 510 mod and compatible liquid to use this tank.

Runs the Entire PnP Coil Range on Any 510 Mod

The PnP Pod Tank accepts every coil in VooPoo's PnP range, not just the VM1 and VM5. That includes MTL coils, RDL coils, ceramic options, and higher-resistance variants. Replacement PnP Coils are among the most widely stocked coil options in UK retail.

The tank screws onto any 510-threaded mod. At 26mm diameter, it fits most devices without overhang. Compatible with but not limited to the Drag X, Drag S, Drag 3, and any other mod with a 510 connection. Browse the VooPoo Range for compatible devices.

E-liquid: 50/50 or 70/30 VG/PG depending on coil. The VM5 at 0.15 ohm handles 70/30 at 3 to 6mg freebase. The VM1 at 0.3 ohm works with 50/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg nic salts through the VM5.

About VooPoo

VooPoo sits in Shenzhen, China, and launched the Drag series in 2017. The GENE chip powers their regulated mods, the TPP coil platform runs their high-wattage tanks, and the PnP coil platform covers everything from pod kits to this 510 tank.

The PnP system is one of the widest coil ecosystems in vaping: one coil format across pods, tanks, and multiple device generations. That kind of backward and forward compatibility is VooPoo's main structural advantage over competing brands.

Stock Up and Save

Two coils in the box. Once those wear down, grab a five-pack of PnP coils in your preferred resistance, and you are set for over a month. Every tank ships sealed in its original VooPoo packaging with the glass and coils protected inside.

We dispatch before 4 pm on weekdays, tracked all the way, 18+ verified. Over £25 unlocks Free Pirate Post.

Conclusion

The PnP Pod Tank is a 510 tank that runs pod coils. That single concept is the reason it exists and the reason it works. PnP coils on any mod. One coil stock across your pod kit and your box mod.

MTL and DTL from the same tank depending on your coil choice. If you are already inside VooPoo's PnP ecosystem and want a 510 option, or if you own a non-VooPoo mod and want access to PnP coils, this tank bridges the gap. Pick one up at Pirate Vapes.

FAQs

Can I use PnP coils from my Drag pod in this tank?

Yes. The PnP Pod Tank accepts every coil in the PnP range. Your existing coils from the Drag X, Drag S, Drag 3, or Vinci fit directly.

Is the PnP Pod Tank top-fill or bottom-fill?

Bottom fill. Unscrew the base, pour in liquid, screw back on. Less convenient than top-fill but maintains the same coil geometry as the PnP pod cartridge.

What mods does the PnP Pod Tank fit?

Any 510-threaded mod. The 26mm diameter sits flush on most box mods.

What e-liquid works best?

VM5 (0.15 ohm): 70/30 VG/PG at 3 to 6mg freebase. VM1 (0.3 ohm): 50/50 at 6 to 10mg or nic salts at 10mg. Avoid 20mg salt through the VM5.

How many colours does the PnP Pod Tank come in?

Two: Black and Silver.