Aspire BP Stik Replacement Pods

Aspire BP Stik Replacement Pods

Keep your Aspire BP Stik running without buying a whole new kit. These refillable replacement pods slot straight into the BP Stik, take push-fit BP coils across a wide 0.15 to 1.0 ohm range, and fill from the bottom through a silicone stopper.

 That coil range means one pod can run a tight MTL draw or an airier sub-ohm one, depending on the coil you fit. Available in a standard 2ml size and a larger XL option, these Replacement Pods are a cheap, simple way to refresh a tired setup.

Why vapers choose this:

• The pod outlives the coil. With a fixed-coil pod, worn flavour means the whole pod goes in the bin. Here you pull the spent coil and push a fresh one in, so the pod keeps going. Cheaper over time, and less waste.

• One pod, two draw styles. The 0.15 to 1.0 ohm coil range covers a tight MTL pull right through to an airier sub-ohm draw.

• Bottom fill with a silicone stopper keeps refills quick and clean.

• Push-fit coils press straight in, no threading or cotton to handle.

• Two sizes so you can pick standard or a larger-format pod.

Aspire BP Stik Replacement Pods Features

Push-Fit Coil Design

The pod uses a push-fit coil, so changing it is a two-second job. Pull the old coil out of the base, press a fresh one in until it seats, and you are done. There is no threading, no cotton to wrestle, and nothing fiddly to line up. For anyone who found coil changes a chore on other systems, this is a welcome bit of simplicity.

0.15Ω to 1.0Ω Coil Range

The BP coil compatibility spans 0.15ohm to 1.0ohm, which is unusually broad for a pod this size. Fit a higher-resistance coil near 1.0ohm for a tight, cigarette-style MTL draw with nic salts, or drop in a low-resistance sub-ohm coil for a warmer, airier hit.

One pod, and the draw is decided by the coil you choose. (Note: While it accepts the standard BP 0.15ohm coil, it is not compatible with the BP Pro 0.15ohm 80-100W coil, as the BP Stik device maxes out at 80W).

Replaceable Coil System

Because the coil is a separate, replaceable part, a worn coil does not mean a dead pod. Swap the coil when the flavour dulls and the same pod carries on. You only replace the pod itself when it starts to leak, crack, or discolour, which keeps your running costs down to mostly coils and juice.

Easy Bottom-Fill Design

Refilling is straightforward. Lift the silicone stopper on the base, add your e-liquid, matching it to the coil you have fitted, then press the stopper firmly back in. The seal keeps liquid where it belongs between top-ups.

The pod comes in two formats. The 2ml is the compact, UK TPD-standard option, while the XL holds more for fewer refills through the day. Both take the same push-fit BP coils, so it comes down to how often you want to top up.

How to Set Up the Aspire BP Stik Replacement Pods

Quick job once you have a coil to hand.

1. Push an Aspire BP coil firmly into the base of the pod until it clicks flush into place.

2. Open the silicone stopper on the bottom fill port.

3. Add your e-liquid, matched to the coil, filling to just below the max line, then reseal the stopper securely.

4. Fit the pod into your BP Stik until it seats magnetically.

5. Stand the device upright for five to ten minutes so the thick cotton completely saturates. Firing a dry coil will instantly ruin it.

6. Set your power mode, then press the button or simply inhale to vape once the flavour settles.

What's in the Aspire BP Stik Replacement Pods Box

Each pack contains one refillable BP Stik pod. No e-liquid is included, and importantly no coil, since the BP Stik uses a separate push-fit BP coil that you buy alongside the pod.

If you are restocking, add a pack of coils at the same time so you are ready to go.

Made for the Aspire BP Stik

These pods are built specifically for the Aspire BP Stik and take the Aspire BP coil range. Fit, seal, and the coil connection all line up as Aspire intended for that device, so it is the genuine spare for the kit.

They will not fit other Aspire systems, which use different pods, so match the pod to your exact device. If you are shopping for a new setup rather than a spare, the MTL Vape Kits range is a good place to start, and the wider Aspire Vapes selection is worth a look for coils and kits.

About Aspire

Aspire is one of the longest-standing names in UK vaping, with a reputation built on reliable, no-nonsense hardware. The BP Stik sits in its stick-style pod range, aimed at vapers who want a slim, simple device with the flexibility of a replaceable coil.

That push-fit coil system, and the broad resistance range it supports, is a big part of why the BP line appeals to people who like to tune their draw without buying into a closed pod. These pods keep the whole thing economical over time.

Stock Up and Save

Because the coil is replaceable, the running cost here is low, mostly coils and juice rather than whole new pods. Keep a couple of spare pods, a pack of BP coils, and a bottle of juice matched to your coil, and you are set for a good while.

Every order from Pirate Vapes ships the same day when placed before 4 pm, packed to arrive safely. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only.

Conclusion

The BP Stik pods are a low-cost, low-fuss way to keep your kit performing: refillable pods with a bottom fill, a push-fit coil, and a broad 0.15 to 1.0 ohm coil range that covers everything from tight MTL to airier sub-ohm.

Just remember the coils are bought separately, so grab some if you are running low, and pick the 2ml or XL size to suit. For coils, juice, and spares to go alongside, browse the Vape Accessories selection from Pirate Vapes, or head to the Pirate Vapes homepage.

FAQs

Do BP Stik pods come with a coil?

No. The BP Stik uses a separate push-fit BP coil, so you will need Aspire BP coils alongside the pod if you do not have spares.

What coils do BP Stik pods take?

Aspire BP coils, across a 0.15ohm to 1.0ohm range. Higher resistances give a tighter MTL draw, lower resistances a warmer sub-ohm one. (Note: They are not compatible with the BP Pro Meshed 0.15ohm 80-100W coil).

What is the difference between the 2ml and XL BP Stik pods?

Capacity and format. The 2ml is the UK TPD-standard size, while the XL is a larger-format pod for fewer refills. Both take the same coils.

How do I fill BP Stik pods?

From the bottom. Lift the silicone stopper, add your e-liquid, and reseal. Prime a fresh coil for a few minutes before vaping.

What e-liquid should I use in BP Stik pods?

Match it to the coil. Higher-resistance coils suit nic salts or 50/50, while low-resistance sub-ohm coils want a high-VG shortfill at lower nicotine.

How long does a BP Stik pod last?

Several weeks if you look after it and change the coil regularly. Replace the pod itself once it starts to leak, crack, or discolour.