Aspire Cleito Pro Tank

Aspire Cleito Pro Tank

Part of Aspire's long-running Cleito line, the Cleito Pro takes the sub-ohm formula that built the range's reputation and pairs it with two flavour-focused heads: a 0.5ohm round-wire coil and a 0.15ohm mesh coil.

It is a 2ml direct-to-lung tank with a stainless steel body, a Pyrex glass window and a wide-bore Delrin drip tip shaped for big, cool draws. Refills are quick, airflow is fully adjustable, and both coils cross-fit the older Cleito tanks. If you want a proven flavour tank among the Sub-Ohm DTL Tanks, the Cleito Pro from Pirate Vapes earns a look.

Why vapers choose this:

• Two coil characters in the box. The 0.15ohm mesh throws dense, saturated flavour for pure cloud sessions, while the 0.5ohm round-wire head gives a slightly warmer, more restrained draw. You get to pick before spending on spares.

• Cross-compatible with older Cleito tanks. These coils also fit the original Cleito and the Cleito Exo, so upgraders are not stuck rebuying.

• Triple-slot bottom airflow that fine-tunes from tight to wide open.

• Wide-bore Delrin tip that stays cool on long direct-lung pulls.

• Aspire build quality, meaning steel and glass that shrug off knocks and wipe clean.

Cleito Pro Features

Two Coil Options Included

The box gives you both Cleito Pro heads. The 0.15ohm mesh spreads heat across a wider surface for that saturated, cloud-heavy flavour mesh is known for. The 0.5ohm round-wire coil pulls back the intensity a touch for a warmer, steadier vape. Worth trying both before you settle.

Easy Slide-To-Fill Top Cap

No unscrewing the whole top. Slide the top ring up, and the fill slot, marked with three dots, appears. Tip in your juice with those dots kept uppermost to avoid spillage, then push the ring back down. Pairs well with a High-VG E-Liquid for the thickest clouds.

Adjustable Triple-Slot Airflow

The triple-slot bottom airflow ring rotates smoothly from a snug, flavour-heavy draw to a fully open, airy one. Sub-ohm vaping lives and dies on airflow, and having three slots to play with means you can match the draw to whichever coil is in. Small tweaks, noticeable results.

Compatible With Cleito Coils

Because the Cleito Pro coils also drop into the original Cleito and Cleito Exo, a spare pack is never wasted. When flavour starts to dip, unscrew the base, swap the head and refill. Keep a Replacement Tank Glass on hand too, since Pyrex can crack on a hard drop.

Strong Stainless Steel And Pyrex Build

The chassis is stainless steel with a reinforced Pyrex window, so it carries a reassuring weight and cleans up easily. Darker, sweeter shortfills will not cloud the glass the way they do on cheap acrylic. Speaking of which, it drinks 70/30 Shortfills happily at these wattages.

Cleito Pro Colours

Four finishes, same tank underneath. Choose on looks alone.

#buttons

• Black
• Gold
• Rainbow
• Silver Grey

How to Set Up the Cleito Pro

Quick job. A couple of minutes start to finish.

1. Unscrew the base of the tank and pull the old coil straight out.

2. Add four or five drops of e-liquid into the wicking ports on the side of the new coil.

3. Screw the new coil firmly into the base, then reassemble the tank.

4. Slide the top ring up and fill through the three-dot slot with your high-VG e-liquid, keeping the dots uppermost.

5. Let the tank rest for eight minutes so the organic cotton wicks through completely.

6. Start around 60W and build up gradually to suit the coil you fitted.

What's in the Cleito Pro Box

Each tank comes with:

• the Cleito Pro tank,

• a pre-installed 0.15ohm mesh coil,

• a spare 0.5ohm coil,

• a replacement glass,

• a set of spare O-rings

• and a user manual.

There is no e-liquid, no mod and no battery included, so you will need a sub-ohm 510 device and a bottle of high-VG juice to get vaping.

The Sub-Ohm Tank That Sits on Your 510 Mod

The Cleito Pro screws onto a standard 510 connection, so it will pair with nearly any Sub-Ohm Vape Mod that can push the 60W to 80W these coils want. If you run an external-battery device, keep a rotation of External Vape Batteries charged so you never run dry mid-session.

It takes the Aspire Cleito Pro coil series, which also serves the original Cleito and Cleito Exo tanks, so there is plenty of choice across the Aspire Range. One thing to note: the wide-bore Delrin drip tip is proprietary and not a standard 510 fitting, so it will not swap for a generic 510 mouthpiece.

About Aspire

The Cleito line is one of Aspire's most recognised sub-ohm families, and the Cleito Pro is its refined, easy-fill successor. Aspire's focus here was the coil: a 0.15ohm mesh head with three wicking ports and organic cotton, built to keep pace with chain vaping without drying out, plus a 0.5ohm round-wire option for a steadier draw.

Cross-compatibility with the older Cleito and Cleito Exo tanks was a deliberate choice, keeping long-time Cleito owners in the fold. It is measured, practical engineering from a brand UK vapers have leaned on for years, and the reason the Cleito name still carries weight.

Stock Up and Save

Sub-ohm mesh coils are consumables, so a spare pack in the drawer saves a flat, flavourless evening when one wears out. Every order from Pirate Vapes ships same day when placed before 4 pm, packed in plain padded mailers.

All hardware is TPD compliant, sold through an age-verified checkout to over-18s only. Free Pirate Post lands on any order over £40.

Conclusion

The Aspire Cleito Pro is a proven, well-built sub-ohm tank that puts flavour first, with two coil options in the box, adjustable airflow and a tidy 2ml TPD build. If you vape direct-to-lung on a capable mod and you want a reliable flavour tank with cheap, widely stocked coils, it is an easy call.

Pair it with fresh coils and spare Vape Accessories from Pirate Vapes to keep it clouding for the long haul.

FAQs

Is the Cleito Pro MTL or DTL?

Direct-to-lung. Both coils run in the 60W to 80W range, so this is a sub-ohm cloud and flavour tank, not a tight MTL one.

What coils fit the Cleito Pro?

The Aspire Cleito Pro series, the 0.15ohm mesh and 0.5ohm round wire. They also fit the original Cleito and Cleito Exo.

How much does the Cleito Pro hold?

The Cleito Pro holds 2ml, which is in line with UK rules.

What e-liquid works best with the Cleito Pro?

A higher-VG blend, think 70/30 or above. Thicker juice wicks better through these coils at sub-ohm wattages.

Can I change the drip tip in the Cleito Pro?

No. The wide-bore Delrin tip is a proprietary fit, not a standard 510, so generic mouthpieces will not seat.

Will old Cleito coils work with the Cleito Pro?

Yes. The Cleito Pro is backward compatible with the earlier Cleito coil heads, which is handy if you are upgrading.