Aspire Loomix Replacement Pods

Four resistance options from a single pod platform. The Aspire Loomix replacement pods come in a pack of two with a built-in mesh coil, 2ml TPD-compliant capacity, top-fill design, and a clear liquid window. 

Pick 0.4ohm for a warmer restricted DTL draw at 21-27W, 0.8ohm for a balanced middle ground at 13-15W, 1.0ohm for a tighter MTL pull at 11-13W, or 1.2ohm for the coolest, lightest draw at 8-11W. 

Built for 50/50 VG/PG or higher-PG e-liquids. Leak-resistant construction. Compatible exclusively with the Aspire Loomix kit. Over 18s only. Browse the full Aspire Range at Pirate Vapes.

Why vapers choose this:

• Four resistances from one pod shape covering everything from a loose RDTL draw at 0.4ohm to a tight cigarette-style MTL pull at 1.2ohm. Same pod, different experience.

• Built-in mesh coil for cleaner flavour than standard round wire, with more even heat distribution across the wick

• Top-fill design keeps the refill process clean. No flipping the pod, no removing it from the device. Open the port, fill, close.

• Clear liquid window shows exactly how much e-liquid remains. No guessing, no running dry accidentally.

• Pack of two at the price point makes the per-pod cost reasonable for a mesh pod with integrated coil

Aspire Loomix Replacement Pods Features

Mesh Coil Built into Every Pod

Each Loomix pod ships with a mesh coil permanently sealed inside the housing. Mesh spreads heat more evenly across the wicking material than a traditional wire coil, which means the flavour stays cleaner and more consistent across the coil's lifespan. 

You will notice the difference most in the final days before the coil needs replacing. Standard wire coils degrade sharply. Mesh holds on longer. When it does eventually fade, you toss the pod and click in a new one. Simple.

Four Resistances, Four Different Draws

Not many pod systems give you this much flexibility from one device. The 0.4ohm runs at 21-27W and produces a warmer, looser draw with more visible vapour. Good for restricted direct lung hits with lower-nicotine freebase liquids. Drop to the 0.8ohm at 13-15W, and you are in a comfortable middle zone, not quite full MTL but tighter than DTL. 

The 1.0ohm at 11-13W tightens things up into a firm mouth-to-lung pull that works well with nic salts at 10-20mg. And the 1.2ohm at 8-11W delivers the coolest, most restrictive draw in the range. Closest to a cigarette. If you are still figuring out your preferred draw style, having four options from the same device is genuinely useful.

Top-Fill That Actually Stays Clean

The fill port sits at the top of the pod. Open it, tilt your bottle in, fill to just below the max line, close. No removing the pod from the device. No flipping anything upside down. The silicone seal keeps liquid locked in between refills, and the design avoids the dripping and pooling that plague bottom-fill pods. 

Fair enough if you have used top-fill pods before and think they are all the same. They are not. The Loomix port is wider than most, which makes filling with thicker nozzles easier.

Made for 50/50 and Higher-PG Liquids

The wicking ports on the Loomix pods are sized for thinner liquids. 50/50 VG/PG works best across all four resistances. Higher-PG blends wick even faster. What you do not want to run through these is High-VG Juice (70/30 or above). 

The wick channels are not wide enough to keep up at those viscosities, and you will get dry hits within a few fills. Pair them with a 50/50 e-liquid or nic salt, and the wicking performs exactly as it should.

Leak-Resistant Construction

Aspire built the Loomix pod with a sealed coil chamber and silicone gaskets around the fill port and base connection. Liquid stays inside the pod and away from the battery contacts and airflow path. Not every pod in this category manages that. 

If you have ever pulled a pod out of your pocket to find a sticky puddle of e-liquid underneath, you will appreciate what Aspire is doing here.

Aspire Loomix Replacement Pods Resistance Options

Four options in the store picker. All use the same pod shell with different mesh coils inside. Pick based on how you vape.

The most versatile starting point is the 0.8ohm at 13-15W. It sits between MTL and RDTL, produces moderate vapour, and works well with both nic salts and low-strength freebase. If you are not sure where to start, this is the safe pick.

Tighter MTL vapers will prefer the 1.0ohm at 11-13W. Firmer draw, less vapour, more throat feel. Pairs well with 20mg nic salts and higher-PG blends. The draw is noticeably more restrictive than the 0.8.

The 1.2ohm at 8-11W runs at the lowest wattage and gives the tightest, coolest draw in the range. Minimal vapour, maximum throat hit, barely touches battery life. If you want a cigarette-style pull with nic salt, this is the one.

For vapers who want more warmth and visible vapour, the 0.4ohm at 21-27W opens the draw into RDTL territory. More cloud, more warmth, and better suited to 3-6mg freebase or 10mg nic salt. Not a full DTL coil, but noticeably looser than the MTL options.

#buttons

• 0.4ohm
• 0.8ohm
• 1.0ohm
• 1.2ohm

How to Set Up the Aspire Loomix Replacement Pods

Quick pod swap. Under two minutes.

1. Remove the spent pod from the Aspire Loomix device by pulling it straight upward from the magnetic connection.

2. Take a fresh Loomix pod from the pack. Open the top-fill port by sliding or lifting the silicone cover.

3. Drip three to four drops of e-liquid directly onto the exposed mesh coil cotton visible through the top of the pod. This pre-saturates the wick before you fill.

4. Fill the pod with your chosen e-liquid to just below the max line. Use 50/50 VG/PG or higher-PG blends for best results.

5. Close the fill port firmly and insert the pod into the Loomix device. It should click or magnetically snap into place.

6. Leave the pod sitting in the device for four to five minutes before taking your first draw. The mesh coil needs time to pull liquid through evenly. Firing the device before the wick is fully saturated will char the cotton and shorten the pod's usable life significantly.

What's in the Aspire Loomix Replacement Pods Box

Two Loomix pods in your selected resistance. No e-liquid, no device, no cable. Just the pods.

If you do not yet own the Aspire Loomix device, you will need the Aspire Loomix Kit to use these pods. They are not compatible with any other Aspire device.

The Refillable Pod for the Aspire Loomix Kit

These pods fit the Aspire Loomix and nothing else. Not the Gotek. Not the Flexus. Not the Minican. Not the PockeX. Aspire designed the Loomix pod as a dedicated platform for the Loomix device, with a magnetic connection and form factor that does not cross over to any other series. If you own a Loomix, these are your pods. If you own a different Aspire kit, you need the pods specific to that device.

About Aspire

The Loomix is one of Aspire's newer pod platforms, and it represents a shift in how Aspire is approaching the refillable pod market. Rather than offering a pod with removable coils, the Loomix uses a sealed mesh coil inside each pod, simplifying the replacement process down to a single swap. 

Aspire has been manufacturing vape hardware since the early days of the industry, and their coil engineering heritage runs through everything from the Nautilus BVC to the Flexus AF mesh to the Loomix. The brand is known for reliability across its MTL Vape Kits, and the Loomix continues that track record with a focus on simplicity.

Stock Up and Save

Two pods per pack. At daily use, each pod lasts roughly one to two weeks depending on your liquid sweetness and how heavily you vape. Having a spare pack ready means you are never stuck with a fading coil waiting for a delivery. The four resistance options let you experiment too. Worth trying the 0.8 and the 1.0 if you are not sure which draw style suits you best. 

Every order from Pirate Vapes ships same-day before 4 pm. TPD compliant, age-verified checkout, over 18s only. Spend over £25 and delivery is free with Free Pirate Post.

Conclusion

The Aspire Loomix replacement pods are a clean, simple refillable pod with a built-in mesh coil, top-fill design, and four resistance options covering everything from RDTL at 0.4ohm to tight MTL at 1.2ohm. The 2ml capacity meets UK TPD requirements, the clear window shows your liquid level, and the leak-resistant build keeps everything where it should be. Pack of two. 

Compatible with the Aspire Loomix kit only. If you own the device, these are your pods. Pick up a pack alongside your favourite e-liquid at Pirate Vapes and browse more Vape Accessories while you are here.

FAQs

Which devices do the Loomix pods fit?

The Aspire Loomix kit. Only the Loomix. They do not fit the Gotek, Flexus, Minican, or any other Aspire device.

What resistance should I choose?

1.0ohm or 1.2ohm for MTL with nic salts. 0.8ohm for a balanced MTL/RDTL crossover. 0.4ohm for a warmer, looser restricted DTL draw.

Can I replace just the coil inside the Loomix pod?

No. The mesh coil is built into the pod permanently. When the coil degrades, you replace the entire pod.

What e-liquid ratio works best with Loomix pods?

50/50 VG/PG or higher-PG blends. High-VG liquids (70/30 and above) are too thick for the wicking ports and will cause dry hits.

How long does each Loomix pod last?

Roughly one to two weeks with daily use. Sweeter liquids shorten the coil life. Lighter vaping extends it.